Rollers
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.
With drilled and counterbored holes for mounting. Urethane bonded to steel plate.
Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.
Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.
Related Information:
Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.
Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.
Related Information:
Rectangular elastomer component bonded with two steel plates.
Low installation height provides good stability. Effectively isolates against horizontal and vertical vibrations. High deflection capacity in horiziontal direction whilst deflection is low in vertical. Oil and grease resistant. Meets OSHA anchoring standards. Ideal use in presses, blowers, pumps, vibrators, rolling mills, crushers etc.
Related Information:
Related Information:
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.
Low cost alternative for making your own wheels, castors, rollers, sheaves etc. Urethane rod with dual hardness. Harder inner sleeve with softer outside for use as a roller.
Blue outer tyre 90A Durometer bonded to a hard brown 75D Durometer inner sleeve. This results in a hard anti friction bearing surface inside with a soft tyre outside. The roller can be cut and machined to suit your purposes. Testing for your application is recommended. This category may be available in the new MBA online store at
Rollers - Urethane - Lengths.
Related Information:
Stainless steel roller type cam followers.
Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.
Related Information:
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at
Linear Slides - Cross Roller Tables - Steel.
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at
Rollers - Solid - Stud Mount - Coloured Urethane.
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at
Rollers - Solid - Shaft Mount - Coloured Urethane.
Match with 12.70x7.75mm simplex chain (08B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.
Related Information:
Match with 9.53x5.7mm steel chain (06B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch.
Related Information:
Match with 12.70x7.85mm simplex chain (40-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs.
Related Information:
Match with 19.05x11.68mm simplex steel chain (12B-1 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch.
Related Information:
Carbon steel roller type cam followers.
Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing. This category may be available in the new MBA online store at
Cam Followers - Roller Type - Standard.
Related Information:
Match with 12.70x7.75mm simplex chain (08B BS)
Related Information:
Easy to install with a standard tap, bolt and wrench.
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
Easy to install with a standard tap, bolt and wrench.
Automatic self locking pressure activated adhesive on external thread. Prevent or repair stripped threads. No special tools required. Simply drill and tap the hole to suit the external thread. Install with a bolt and wrench. Metric, UNC and UNF.
Related Information:
Match with 12.70x7.75mm simplex chain (08B BS)
Related Information:
Match with 9.53x5.7mm steel chain (06B BS)
Related Information:
Match with 12.70x7.75mm duplex chain (08B-2 BS)
Related Information:
Match with 12.70x7.85mm simplex chain (40-1 ASA)
Related Information:
Match with 15.90x9.65mm duplex steel chain (10B-2 BS)
Related Information:
Match with 9.53x4.7mm steel chain (35-1 ASA)
Related Information:
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at
Rollers - Solid - Stud Mount - Black Neoprene.
Hardened Steel Rollers as used in Cylindrical and Needle Roller Bearings
Hardened Steel Rollers as used in Cylindrical and Needle Roller Bearings. This category may be available in the new MBA online store at
Rollers - Steel.
Related Information:
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Related Information:
Hardened thrust washers for thrust bearings - ungrooved. Match with thrust ball and retainer or roller type.
Related Information:
304 Stainless Steel and Polyurethane
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud. This category may be available in the new MBA online store at
Knobs - Round - Male - Soft.
Related Information:
Vibration isolation for mobile and static applications involving plate clamping
Related Information:
Miniature 3.75mm Pitch.
Related Information:
25-1 ASA 1/4 Inch. With finished bore.
Related Information:
25-1 ASA 1/4 Inch. With unfinished bore.
Related Information:
25-1 ASA 1/4 Inch. Stainless Steel 303 grade with unfinished bore.
Related Information:
25-1 ASA 1/4 Inch
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch.
Related Information:
Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.
The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. Includes stud epoxied into the base mount. This category may be available in the new MBA online store at
Mounts - Pivotal Levelers - With Stud.
Related Information:
Vee guide rails for vee grooved track roller guide wheels.
Related Information:
Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.
The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. No stud included so you can use your own custom stud. This category may be available in the new MBA online store at
Mounts - Pivotal Levelers - Base Without Stud.
Related Information:
Vee guide rails for vee grooved track roller guide wheels.
Related Information:
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
Conical 302 Stainless steel springs
Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate. This category may be available in the new MBA online store at
Springs - Compression - Conical.
Related Information:
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138615
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.