Linkage Connectors with blank ends - no hole
Drop forged steel machined to SAE standards. Also see clevis joints. This category may be available in the new MBA online store at
Yoke Ends - Blank.
Related Information:
Linkage Connectors
Drop forged steel machined to SAE standards. Also see clevis joints. This category may be available in the new MBA online store at
Yoke Ends - Threaded.
Related Information:
Urethane tyred cam yoke rollers for noise reduction, reduced wear and non marking. 80 Shore A hardness.
Related Information:
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at
Rod Ends - Plastic - Female.
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at
Rod Ends - Plastic - Male.
Imperial and Metric. Forged tempered steel. Rolled thread. Surface galvanised. Also known as Heim Joints. Nylon - ptfe - glass compound race.
Imperial and Metric. Forged tempered steel. Rolled thread. Surface galvanised. Also known as Heim Joints. Nylon - ptfe - glass compound race.
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Also known as Heim Joints
Also known as Heim Joints
Also known as Heim Joints
Dimensions not shown are available on request.
Also known as Heim Joints
Economy stamped style combines high strength with low cost. Also known as Heim Joints
Made from low carbon steel and plated for corrosion resistance. Ball is case hardened. This category may be available in the new MBA online store at
Rod Ends - Steel - Stamped - Female.
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination. Also known as Heim Joints
Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination.
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Also known as Heim Joints
Also known as Heim Joints
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated. This category may be available in the new MBA online store at
Rod Ends - Steel - Studded - Nylon Seat - Female.
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.
Related Information:
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg.
Related Information:
Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.
Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg.
Related Information:
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at
Snap Buttons - Double End.
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at
Snap Buttons - Single End - Dog Leg.
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at
Snap Buttons - Single End - Spring Leg.
Flexible shafting with coupling ends ready to attach to a fixed shaft.
1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm. This category may be available in the new MBA online store at
Shafts - Flexible - Coupling Ends - Open - Mild Steel.
Related Information:
Simple effective way to lock components onto shafts.
416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened. This category may be available in the new MBA online store at
Shaftloc-tm Sleeves - Single Ended.
Related Information:
One end threaded so you can attach your own handle or knob. 303 Stainless Steel.
Related Information:
Precision Dowel Pins - Based on DIN6325, ISO2338
Related Information:
To suit the precision diffs listed on this site. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.
For end play take up.
Thickness tolerance +/- 0.025. This category may be available in the new MBA online store at
E-Clips - Bowed.
Related Information:
Related Information:
Precision Dowel Pins - 316 Grade - Based on DIN6325, ISO2338, ISO 8734
Related Information:
Precision Dowel Pins - 416 Grade - Based on DIN6325 or ISO2338
Related Information:
Precision Dowel Pins - 303/304 Grade Stainless - Based on DIN6325, ISO2338, ISO 8734
Related Information:
Precision Dowel Pins - 316 Grade - Based on DIN7
Related Information:
Precision Dowel Pins - Based on DIN7
Related Information:
Used for locking the ends of timing belt lengths used in reciprocating applications
Suits single and double sided belts. Black Polycarbonate with 303 stainless fasteners. Low inertia. Compact Design. Patent Pending. For MXL, XL, GT 2mm, GT 3mm, GT 5mm, HTD 3mm and HTD 5mm belt pitches.
Related Information:
Precision Dowel Pins - 303/304 Grade Stainless- Based on DIN7
Rounded end dowel pins are measured from the start of the edge rounding. This allows the pin to completely fill the hole after you grind off the rounded end. Diameter tolerances are m6. Also known as parallel pins. This category may be available in the new MBA online store at
Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends.
Related Information:
Used for locking the ends of timing belt lengths used in linear applications
Suits single sided belts only. Aluminium. Screws, hex nuts and washers included. This category may be available in the new MBA online store at
Clamp Kits - Timing Belt.
Related Information:
Used for indexing and positioning of components
Once installed, it applies adequate pressure so the ball remains positioned.
Rails, rollers and end stops sold separately. Please choose your components from the listing.
Easy to use system is usually mounted on a vertical surface as a low cost linear motion solution. Hardened crown roller allows for self-alignment with good strength and long life. Rails are unistrut typeand are black powder coated. End stops prevent over travel and come with a mounting bolt. End stops are not designed to support loads. Maximum bearing load is 130 kg. Maximum bearing speed is 45 mtrs per minute. This category may be available in the new MBA online store at
Linear Track System - Crowned Roller.
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138616
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.