WC28 REID
Cross Referenced Part Numbers
Reid part number WC-280Matches our part number
Wheel Diameter: 152.40 x 38.10. Type: Swivel with Brake. Tyre material: Polyurethane.
Part Link: WC280RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-281Matches our part number
Wheel Diameter: 101.60 x 38.10. Type: Swivel. Tyre material: Polyolefin.
Part Link: WC281RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-282Matches our part number
Wheel Diameter: 101.60 x 38.10. Type: Rigid. Tyre material: Polyolefin.
Part Link: WC282RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-283Matches our part number
Wheel Diameter: 101.60 x 38.10. Type: Swivel with Brake. Tyre material: Polyolefin.
Part Link: WC283RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-285Matches our part number
Wheel Diameter: 127.00 x 38.10. Type: Rigid. Tyre material: Polyolefin.
Part Link: WC285RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-286Matches our part number
Wheel Diameter: 127.00 x 38.10. Type: Swivel with Brake. Tyre material: Polyolefin.
Part Link: WC286RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-287Matches our part number
Wheel Diameter: 152.40 x 38.10. Type: Swivel. Tyre material: Polyolefin.
Part Link: WC287RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-288Matches our part number
Wheel Diameter: 152.40 x 38.10. Type: Rigid. Tyre material: Polyolefin.
Part Link: WC288RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-289Matches our part number
Wheel Diameter: 152.40 x 38.10. Type: Swivel with Brake. Tyre material: Polyolefin.
Part Link: WC289RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Reid part number WC-28Matches our part number
Wheel Diameter: 127.00 x 50.80. Type: Swivel. Tyre material: Polyurethane.
Part Link: WC28RS
Rec. Retail Price: 0.00
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
(As low as in bulk)
Stock: Pre-Order (due 6 weeks) Due dates are estimates only
Category Matches
Bearings Press In
Bearings - Press-Fit - Sintered Bronze - Flange Mounted - SDP
Porous sintered bronze bearing. -28 to 95 oC. Retainer : Carbon Steel / Zinc Plated or Oxycote(R) Hardened to HRB 93.98. Use any shaft material with 0.8 um or finer finish.
Related Information:
Washers Aligning
Washers - Self Aligning - Sets - Hardened Steel
Spherical Seat Washers
Hardened steel 9 S Mn Pb 28 K DIN 6319. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.
Washers - Self Aligning - Components - Hardened Steel
Spherical Seat Washers. Washer A (aligning) and washer B (seat) sold separately.
Hardened steel 9 S Mn Pb 28 K DIN 6319. Order a base washer and an aligning washer to make a complete unit. Max Shaft Size Shown will allow 3o of misalignment. DIN 6319-NI washers are used for clamping mechanical parts with non-parallel surfaces.
282A Slow Speed Kavo Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
628 - 629 FG Kavo Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
628 BellaTorque Kavo Parts
Bearings and Spare Parts
Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.
Balls - Plastic - PTFE
No water absorption. Temperatures up to 288 Deg C.
Tolerances available on request. Not affected by any known acids or alkalies. No water absorption. Temperatures up to 288 oC. Unpolished. Specific Gravity: 2.3.
Related Information:
Motors - DC 30.5X24.2 mm
M-28 Series 1.5 to 24 VDC - 2830 to 14250 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
Motors - DC 30.5X24.2X18.3 mm
MF-28 Series - 1.5 to 24 VDC - 4470 to 13430 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
Joints - Clevis - Steel
Joint only, clip pin ordered separately. Made from zinc plated 9SMn steel.
Steel 9 SMn 28K (550-700 N/mm2). Zinc plate and clear passivated. Pin not included. See also yokes.
Related Information:
Rod Ends - Plastic - Female
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request.
Rod Ends - Plastic - Male
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request.
Housings - Bearing - Pillow Block - Thermoplastic - W300
Iglide L280 / Igus W300 Ball with Thermoplatic Body.
Maintenance Free, Lightweight, Self-Lubricating. Compensates for alignment errors. Temperature Range -40 oC to +130 oC. Max. Static Tensile Strength is Long Term. Info for Short Term also available.
Shafting - Ground - Precision - Titanium - Ti-Gr2-TA1
CP2 Commercially Pure Titanium Grade 2. Tensile Strength 35.2 kgf/mm2. Yield Strength 28.2 kgf/mm2. Elongation 20 Percent.
Commercially pure for general industrial corrosion applications. UNS R50400. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.3, O 0.25, Ti Balance.
Related Information:
Gearboxes - Tee - 180.0 x 140.0 x 98.0mm
Bevel Gears - 26.0 to 128.0 Nm. BLHM70 Series.
Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620). Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.
Motors - DC 25.0X21.0 mm
M-14 Series 1.5 to 3 VDC - 4230 to 11280 RPM.
See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.
Related Information:
Washers - Thrust - DP4 Type
Wear resistant helping to prevent wear deposits in the lubricating oil after long working periods. Designed for use in oil pumps and dampers.
Operating Temperature -200o to 280o Celsius. Maximum load 250N per mm2. Low static and dynamic friction coefficient, Suitable for sliding, oscillating, reiprocating and rotating applications. High reistance to be cavitation and flow erosion damage of the polymer bearing surface by the lubricant, Excellent wear resistant. Also suitable for use with non-lubricating fluids and in light duty unlubricated applications, Lead free.
Main Pages
About Us
Balls
Bearings
Brands
Catalogue
Clearance Items
Contact Us
Contact
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 125378 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
