Small Parts & Bearings - an MBA company

WC21 REID


Cross Referenced Part Numbers



WC210RS Reid part number WC-210



Wheel Diameter: 76.20 x 25.40. Type: Swivel. Tyre material: Polyurethane.

Rec. Retail Price: 0.00     
(As low as in bulk)     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     



WC211RS Reid part number WC-211



Wheel Diameter: 127.00 x 25.40. Type: Rigid. Tyre material: Polyurethane.

Rec. Retail Price: 0.00     
(As low as in bulk)     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     



WC212RS Reid part number WC-212



Wheel Diameter: 76.20 x 25.40. Type: Swivel. Tyre material: Polyolefin.

Rec. Retail Price: 0.00     
(As low as in bulk)     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     



WC218RS Reid part number WC-218



Wheel Diameter: 76.20 x 31.75. Type: Swivel. Tyre material: Soft Rubber.

Rec. Retail Price: 0.00     
(As low as in bulk)     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     



WC219RS Reid part number WC-219



Wheel Diameter: 76.20 x 31.75. Type: Rigid. Tyre material: Soft Rubber.

Rec. Retail Price: 0.00     
(As low as in bulk)     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     



WC21RS Reid part number WC-21



Wheel Diameter: 101.60 x 50.80. Type: Swivel. Tyre material: Polyurethane.

Rec. Retail Price: 0.00     
(As low as in bulk)     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     


Category Matches

Chain and Sprockets Ladder




Circlips - External - Grooveless
Circlips - External - Grooveless

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:


2304LD - 553 5121 Kavo Parts
2304LD - 553 5121 Kavo Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Motors - DC 25.0X21.0 mm
Motors - DC 25.0X21.0 mm

Also see combined categories:
All DC Motors

M-14 Series 1.5 to 3 VDC - 4230 to 11280 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:


Circlips - External - Tabbed
Circlips - External - Tabbed

Also see combined categories:
All External Circlips

DIN 983 / D2100 / AK. Retaining rings. Snap Rings (USA).

External tabs are concentrically positioned for positioning in a concealed assembly. Tabs act as spacers for securing machine components. Conforming to DIN 983.

Related Information:


Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm
Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Inline - 114 x 90mm
Gearboxes - Inline - 114 x  90mm

Also see combined categories:
All Inline Gearboxes

NT121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 2.6/4.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:


Gearboxes - Inline - 120 x 103mm
Gearboxes - Inline - 120 x 103mm

Also see combined categories:
All Inline Gearboxes

NTB121 Series.

Case: Aluminium, Gear: 655M13 Hardened. Weight: 1.63/3.0kg, Backlash: Depends on ratio. Max Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:


Slides - Drawer - Medium Duty - Undercarriage Mount
Slides - Drawer - Medium Duty - Undercarriage Mount

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. 21mm over travel.


Spiral Rings - External - Heavy Duty
Spiral Rings - External - Heavy Duty

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.


Spiral Rings - External - Medium Duty
Spiral Rings - External - Medium Duty

Also see combined categories:
All External Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.


Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.


Spiral Rings - Internal - Medium Duty
Spiral Rings - Internal - Medium Duty

Also see combined categories:
All Internal Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.


Spring Assemblies - Small Bracket - RINO
Spring Assemblies - Small Bracket - RINO


Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Related Information:


Gears - Spur - 120DP - Aluminium
Gears - Spur - 120DP - Aluminium

Also see combined categories:
All 120DP Spur Gears
All Metal 120DP Spur Gears

PCD = No. of Teeth x 0.212mm (1/120 in.). 20o Pressure Angle. 2024 aluminium. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Gears - Spur - 120DP - Stainless
Gears - Spur - 120DP - Stainless

Also see combined categories:
All 120DP Spur Gears
All Metal 120DP Spur Gears

PCD = No. of Teeth x 0.212mm (1/120 in.). 20o Pressure Angle. 303 stainless steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 120 Diametrical Pitch. Approx 0.66mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Balls - Chrome Steel
Balls - Chrome Steel

Also see combined categories:
All Metallic Balls

Hardness: Rockwell C: 60-70.

Tolerances available on request. SAE 52100 Chrome Steel. Hardness: Rockwell C: 60-70. Specific Gravity: 7.833.

Related Information:


Gearboxes - Tee - 100.0 x 100.0 x 60.0mm
Gearboxes - Tee - 100.0 x 100.0 x 60.0mm

Also see combined categories:
All Tee Gearboxes

BLHT50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Tee - 125.0 x 125.0 x 80.0mm
Gearboxes - Tee - 125.0 x 125.0 x 80.0mm

Also see combined categories:
All Tee Gearboxes

BLHT60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Tee - 140.0 x 140.0 x 98.0mm
Gearboxes - Tee - 140.0 x 140.0 x 98.0mm

Also see combined categories:
All Tee Gearboxes

BLHT70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Tee - 55.0 x 55.0 x 34.0mm
Gearboxes - Tee -  55.0 x  55.0 x 34.0mm

Also see combined categories:
All Tee Gearboxes

BLHT30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearboxes - Tee - 75.0 x 75.0 x 44.0mm
Gearboxes - Tee -  75.0 x  75.0 x 44.0mm

Also see combined categories:
All Tee Gearboxes

BLHT40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:


Gearboxes - Tee - 40.0 x 40.0 x 25.0mm
Gearboxes - Tee -  40.0 x  40.0 x 25.0mm

Also see combined categories:
All Tee Gearboxes

BLHT20 Series. Miniature gearbox.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.


Anchors - Spring - Steel
Anchors - Spring - Steel

Also see combined categories:
All Spring Anchors

An economical way to secure the ends of extension springs, and provide easy adjustment.

C-12114 Steel with Black Oxide Finsh.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124473 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124473 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.