Washers Locking Categories
You may also be interested in
Springs Disc
Washers - Disc Spring - Flange Locking Type
Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock. Also known as belleville washers.
The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.
Washers Serrated Locking
Washers - Disk Lock
Also see Nord Lock and Lockrite washers
Stainless Grade Grade A2 302/316 18-8. Vibration-proof self tightening structural locking device. Maximum Working Temp: +430oC. DISC-LOCK(R) has outperformed all other types of loose, washered, threaded or pinned systems. in a wide range of high stress, corrosive, and vibration sensitive applications.
Washers - LockRite - Corrosion Resistant
Supplied in pairs. With Delta Protekt coating.
Locking function not affected by lubrication. Assembled in pairs, cam face to cam face. Eliminates the need for adhesives. Reusable. Can be used with fasteners up to grade 12.9.
Washers - LockRite - 316 Stainless Steel
Supplied in pairs.
Locking function not affected by lubrication. Assembled in pairs, cam face to cam face. Eliminates the need for adhesives. Reusable. Can be used with fasteners up to grade 12.9.
Clamps
Clamp Kits - Timing Belt
Used for locking the ends of timing belt lengths used in linear applications
Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.
Related Information:
Latches Handle
Handles - Latching - 2-Point Locking Rod Kit
Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.
Locknuts - Stainless Insert
Simplify the assembly and reduce costs involved in securing ball bearings. One piece item where the locking function is performed by a spring peened into the top of the nut.
Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269. The spring bears on the flank of the shaft thread with force (P) generating reaction force (P’) in the screw threads with a resulting high friction torque (prevailing torque). Unique slim body design. Secure locking without keyway and tab washer. One piece construction reduces stock and allows simpler, quicker assembly. Simple infinite adjustment. Re-usable up to 100 times. Resists vibration and shock. Equally effective for rotation in either direction even with rapid reversals.
Related Information:
Assemblies - Locking - Flanged
Suitable for locking sprockets, pulleys, eccentric shafts.
Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.
Elements - Locking
2.4 to 2200 Nm, 6-80mm Bores
ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8.
Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
Plungers - Indexing - Locking - With Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
Plungers - Indexing - Locking - With Mounting Plate - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel. Includes rest position for plunger to stay in retracted position.
Plungers - Indexing - Locking - With Shoulder - Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Plungers - Indexing - Locking - With Shoulder - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
Plungers - Indexing - Non Locking - Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Plungers - Indexing - Non Locking - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
Plungers - Indexing - Non Locking - With Knob - 303 Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
Plungers - Indexing - Non Locking - With Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
Plungers - Indexing - Non Locking - With Mounting Plate - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Spring loaded to work in a variety of applications on both tooling and equipment that require surface mounting. Plunger is hardened and ground. Knob is black matte plastic. Mounting plate is zinc plated steel.
Plungers - Indexing - Non Locking - Without Knob - 303 Stainless Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
303 Stainless Steel.
Plungers - Indexing - Non Locking - Without Knob - Steel
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
Plungers - Indexing - Non Locking - With Shoulder - Stainless - With Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Plungers - Indexing - Non Locking - With Shoulder - Steel - With Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
Plungers - Indexing - Non Locking - With Shoulder - Steel - Without Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Body and pin are steel with black oxide finish.
Plungers - Indexing - Precision - Locking - Ball Grip
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Plungers - Spring - L Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - L Handle - Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - L Handle - Locking - Stainless-Phenolic
Stainless body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - L Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - L Handle - Locking - Steel-Acetal
Steel body and acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - L Handle - Locking - Steel-Phenolic
Steel body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Pins - Clevis - Self Locking
No need for cotter pins. Inexpensive ball lock pin type.
Self locking and reusable with a spring loaded ball lock. Plated steel with stainless steel ball.
Related Information:
Handles - Latching - L-Handle - Locking
Chrome finished zinc die-cast construction. 360o handle rotation. Comes with gasket. All locks are keyed alike. Keys included. May be used with rod kit for 2 point locking.
Related Information:
Handles - Latching - T-Handle - Locking
90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.
Related Information:
Plungers - Indexing - Unthreaded - Non Locking - Steel - With Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.
Plungers - Indexing - Unthreaded - Non Locking - Steel - Without Knob
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
For use where the application calls for the plunger to be welded or bonded. Body and pin are steel with black oxide finish.
Plungers - Spring - Acetal Handle - Locking - Stainless
White acetal plastic handle . 303 stainless steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Acetal Handle - Locking - Steel
Black acetal plastic handle . Black oxide coated steel body and plunger.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Knurled Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Knurled Handle - Locking - Stainless-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Knurled Handle - Locking - Stainless-Phenolic
Stainless body with phenolic nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Knurled Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Knurled Handle - Locking - Steel-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - L Handle - Non Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Pull Ring - Locking - Stainless-Acetal
Stainless body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Pull Ring - Locking - Steel-Acetal
Steel body with acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Ring Handle - Locking - Stainless
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Ring Handle - Locking - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 127030 products in 2352 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
