Small Parts & Bearings - an MBA company

Turnbuckles Jaw And Jaw Forged Carbon Steel Categories


Hooks


Turnbuckles - Jaw and Jaw - Forged Carbon Steel
Turnbuckles - Jaw and Jaw - Forged Carbon Steel

Also see combined categories:
All Turn Buckles

Hot galvanised, meets USA Federal specifications FF-T-791b, Type I, Form 1-class 4

Coarse threads.


Turnbuckles - Eye and Eye - Forged Carbon Steel
Turnbuckles - Eye and Eye - Forged Carbon Steel

Also see combined categories:
All Turn Buckles

Hot galvanised, meets USA Federal specifications FF-T-791b, Type I, Form 1-class 4

Coarse threads.


Turnbuckles - Jaw and Jaw - 316 Stainless Steel
Turnbuckles - Jaw and Jaw - 316 Stainless Steel

Also see combined categories:
All Turn Buckles

Meets dimensions of ASTM specification F1145-92 Type 1, Class D



Turnbuckles - Eye and Eye - 316 Stainless Steel
Turnbuckles - Eye and Eye - 316 Stainless Steel

Also see combined categories:
All Turn Buckles

Meets dimensions of ASTM specification F1145-92 Type 1, Class D



Turnbuckles - Midget - Eye to Eye
Turnbuckles - Midget - Eye to Eye

Also see combined categories:
All Turn Buckles

Economy turnbuckles for light duty applications. Sand cast aluminium bodies.

Hex necks. Electro galvanised eyes.

Related Information:


Turnbuckles - Midget - Hook to Eye
Turnbuckles - Midget - Hook to Eye

Also see combined categories:
All Turn Buckles

Economy turnbuckles for light duty applications. Sand cast aluminium bodies.

Hex necks. Electro galvanised hooks.

Related Information:


Shackles - Anchor - Safety - Steel
Shackles - Anchor - Safety - Steel

Also see combined categories:
All Shackles

Forged carbon steel, self coloured.

Bolt runs all the way through the shackle and is secured with a nut and cotter pin.


Shackles - Anchor - Screw Pin - Steel
Shackles - Anchor - Screw Pin - Steel

Also see combined categories:
All Shackles

Forged carbon steel, self coloured.



Tie Downs - D-Ring - Forged with Bolt-on Bracket
Tie Downs - D-Ring - Forged with Bolt-on Bracket

Also see combined categories:
All D Ring Tie Downs

C-1045 steel with bolt-on mounting bracket



Tie Downs - D-Ring - Forged with Weld-on Bracket
Tie Downs - D-Ring - Forged with Weld-on Bracket

Also see combined categories:
All D Ring Tie Downs

C-1045 steel with weld-on mounting bracket



Bolts - Eye - Full Threaded Shanks - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Forged self coloured carbon steel.

Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Snaps - Safety Hook
Snaps - Safety Hook

Also see combined categories:
All Snaps

Galvanised drop forged steel with stainless steel spring



Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated

Also see combined categories:
All Eye Bolts

Forged zinc plated carbon steel.

Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.


Yoke Ends - Threaded
Yoke Ends - Threaded

Also see combined categories:
All Yoke Ends

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:


Pulleys - Blocks - Flat
Pulleys - Blocks - Flat

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Pulleys - Blocks - Eye - Fixed
Pulleys - Blocks - Eye - Fixed

Also see combined categories:
All Pulley Blocks

Steel side plates with drop forged hooks. Electroplated sheaves are turned from cold rolled bar stock.

Bearings made from bronze and steel, oil impregnated for self lubrication. Designed for high load and medium speed.


Yoke Ends - Blank
Yoke Ends - Blank

Also see combined categories:
All Yoke Ends

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:


Dubro Accessories Listed by Description
Dubro Accessories Listed by Description


Accessories for model airplanes and other hobbies.

Allen Keys, Antenna Cowlings, Antenna Tubes, Axles, Ball Links, Ball Drivers, Bellcranks, Cables, Clevis, Clips, Collars, Connectors, Control Horns & Links, Couplings,. Crimps, DVDs, Fittings, Fuel Bottles, Fuel Connectors, Fuel Systems, Fuel Tank, Fuel Tube, Gas Conversion Stoppers, Gear Block Sets, Heat Shrink, Hinges, Horns,. Kwik Grips, Kwik Starts, Kwik Stops, Landing Gears Latchs, Linkages, Links, Mixers, Mounts, Nuts, Pumps, Push Rods, Reamers, Retainers, Rod Ends, Screws,. Screwdrivers, Servo Arms, Servo Savers, Shafts, Spinners, Steering Arms, Stoppers, Switches, Tap & Drill Sets, Tape, Threaded Rods, Tools, Tube Benders,. Turnbuckles, Valves, Washers, Wheels, Wheel Covers, Wheel Retainers, Wing Mount Kits, Wrenchs, Push-Pull Cable.


Rings - Hoist - Side Pull - External Wrench Mount
Rings - Hoist - Side Pull - External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Side Pull - Internal-External Wrench Mount
Rings - Hoist - Side Pull - Internal-External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Stationary - With Screws
Rings - Hoist - Stationary - With Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.


Rings - Hoist - Heavy Duty - MIL-STD1365
Rings - Hoist - Heavy Duty - MIL-STD1365

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.


Hooks - Lifting - Swivel and Pivot
Hooks - Lifting - Swivel and Pivot


Full swivel and 180o pivot with double ball bearings for smooth tilting, twisting and turning.

Eliminates jerking of the lifting point. Suitable for sling system including hook, eye or loop. Has non protruding hook tip and is extremely durable. Forged safety latch which engages in the top of the hook protecting against lateral bending. Coiled double leg stainless steel spring protected by latch design.


Couplings - Three Jaw Type - Hubs
Couplings - Three Jaw Type - Hubs


Match with Three Jaw Type inserts by OD. Two Hubs and one insert will be needed to make a complete coupling.

Complete with keyway and set screw. No lubrication needed.

Related Information:


Couplings - Three Jaw Type - Inserts
Couplings - Three Jaw Type - Inserts


Match with Three Jaw Type hubs by OD

Use Bost-Bronz inserts for high torque loads at slower speeds. Use rubber for quiter operation. Use polyurethane for moderate to heavy shock loads.

Related Information:


Couplings - HRC
Couplings - HRC

Also see combined categories:
All Insert and Jaw Type Couplings


Related Information:


Mounts - Leveling - Machine - Cushioned
Mounts - Leveling - Machine - Cushioned

Also see combined categories:
All Mounting Feet

Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.

Related Information:


Couplings - Spline Type - Complete
Couplings - Spline Type - Complete

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


Couplings - Oldham - Hubs - Clamp Style
Couplings - Oldham - Hubs - Clamp Style

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Hubs

0.06 to 44 Nm. Max Speed: 3000 RPM.

Single hubs. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:


Couplings - Spider Type B - Complete
Couplings - Spider Type B - Complete

Also see combined categories:
All Insert and Jaw Type Couplings

Max 3600 RPM. 0.39 to 16.27 Nm. Match only hubs and spiders from listings SPIDER TYPE B. Insert is set between the jaws of two hubs.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM. Rubber spider and metal hubs.

Related Information:


Couplings - Spider Type C - Complete
Couplings - Spider Type C - Complete

Also see combined categories:
All Insert and Jaw Type Couplings

Miniature aluminium curved jaw flexible couplings. 2 to 160 Nm. Match only hubs and spiders from listings SPIDER TYPE C. Inserts are held between the jaws of two hubs.

Discs (either red as standard with blue or white optional) are available to purchase separately. Flexible couplings transmit torque and rotational angle while absorbing misalignment. When the misalignment exceeds allowable values, vibration may result or the life of the coupling may become shortened. Zero backlash in low torque application, made capable by having the hubs pressed in a spacer. Can be used as a flexible coupling in a high torque application. Polyurethane spider.

Related Information:


Couplings - Spline Type - Spare Hubs
Couplings - Spline Type - Spare Hubs

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


Couplings - Oldham - Disks for Clamp Style
Couplings - Oldham - Disks for Clamp Style

Also see combined categories:
All Insert and Jaw Type Couplings
All Oldham Disks

0.06 to 44 Nm. Max Speed: 3000 RPM.

Disk inserts. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:


Couplings - Spider Type B - Hubs Only
Couplings - Spider Type B - Hubs Only


Match 2 hubs with a spider from the spiders category. Match only rubber spiders from listings SPIDER TYPE B. Insert is set between the jaws of two hubs.

Angular Offset = 1 Deg. Max. Parallel Offset = 0.381mm Max. Max Recommended Speed 3600 RPM. Metal hubs to suit rubber spiders type B.

Related Information:


Couplings - Spline Type - Spare Poyurethane Splines
Couplings - Spline Type - Spare Poyurethane Splines

Also see combined categories:
All Insert and Jaw Type Couplings

0.5 to 4.5 Nm. 12000 to 24000 rpm.

Maximum parallel offset 0.2mm, Maximum working angle 2 Deg. High RPM. No Lubrication. Electrically Isolated. Dampens Shock & Vibration. Operating temperature -30 to 100 oC.

Related Information:


Couplings - Oldham - Complete - Acetal Disk - Set Screw
Couplings - Oldham - Complete - Acetal Disk - Set Screw

Also see combined categories:
All Insert and Jaw Type Couplings

0.06 to 44 Nm. Max Speed: 3000 RPM.

Max Speed: 3000 RPM. Parallel out of line compensation. Temp Range -20 oC to +60 oC. Oldham couplings are designed to transfer torque between two parallel, but not colinear, shafts. They have three discs, one coupled to the input, one coupled to the output, and a centre disc that is joined to the first two by tongue and grooves. This type of coupling is ideal for applications where it is difficult to move shafts to allow the coupling to be installed. The centre disk can be fitted after the hubs have been assembled and aligned.

Related Information:


Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel
Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel

Also see combined categories:
All Eye Bolts

Hot galvanised finished steel with machine thread.

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel
Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel

Also see combined categories:
All Eye Bolts

316 Stainless Steel

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel
Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel

Also see combined categories:
All Eye Bolts

316 Stainless Steel

Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.


Circlips - External - Standard - Carbon Steel
Circlips - External - Standard - Carbon Steel

Also see combined categories:
All External Circlips

Imperial and metric DIN471 / N1400 / D1460. Retaining rings. Snap Rings (USA).

Plain carbon steel.

Related Information:


Circlips - Internal - Standard - Carbon Steel
Circlips - Internal - Standard - Carbon Steel

Also see combined categories:
All Internal Circlips

Imperial and metric DIN471 and 472 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).

Plain carbon steel. Tolerances on request. Standard and heavy duty options.

Related Information:


E-Clips - Basic - Carbon Steel
E-Clips - Basic - Carbon Steel

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Carbon spring steel including zinc plated and plain.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. Includes plain and zinc plated.

Related Information:


Attachments - Thimbles - Carbon Steel
Attachments - Thimbles - Carbon Steel


Hot galvanised carbon steel. Use with synchromesh or standard miniature cable

Meets USA Fed. Spec. FF-T-276b for Type III thimbles.

Related Information:


Pins - Clevis - Carbon Steel
Pins - Clevis - Carbon Steel

Also see combined categories:
All Clevis Pins

Match with a suitable R-Clip or Spilt Pin - pin size shown in listings


Related Information:


Pins - Clik - Carbon Steel
Pins - Clik - Carbon Steel

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:


Pins - Roll - Carbon Steel
Pins - Roll - Carbon Steel

Also see combined categories:
All Roll Pins

Plain carbon spring steel DIN1481.


Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126234 products in 2741 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126234 products in 2741 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.