Sleeves
Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.
Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.
Plain carbon steel key steel. Square steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. This category may be available in the new MBA online store at
Keysteel Lengths - Square - Carbon Steel.
Related Information:
Zinc plated carbon steel key steel. Square steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour. This category may be available in the new MBA online store at
Keysteel Lengths - Square - Zinc Plated.
Related Information:
Also known as snapper pins
Related Information:
Also known as snapper pins
Related Information:
Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6885
Related Information:
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
Related Information:
Hollow square tubing for general hobby applications.
Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more. This category may be available in the new MBA online store at
Tube - Square - Aluminium.
Related Information:
Hollow square tubing for general hobby applications.
Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more. This category may be available in the new MBA online store at
Tube - Square - Brass.
Related Information:
Hollow square tubing for general hobby applications.
Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Includes K&S Metals range and more. This category may be available in the new MBA online store at
Tube - Square - Copper.
Related Information:
Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.
Plastic bungs fit inside square tube.
Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. This category may be available in the new MBA online store at
Bungs - Square.
Related Information:
With drilled and counterbored holes for mounting. Neoprene only, no steel plate.
With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.
With drilled and counterbored holes for mounting. Urethane bonded to steel plate.
Metric only.
Related Information:
Aluminium housings to suit standard radial ball bearings.
Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.
High capacity, square gib slides are ideal for precision machine tool applications.
The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight. This category may be available in the new MBA online store at
Square Bar - Brass.
Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent. This category may be available in the new MBA online store at
Square Bar - Urethane.
Special bearings. Not readily available.
For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards
Used to maintain radial integrity and eliminate the need for parallel shafting.
Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads. This category may be available in the new MBA online store at
Housings - Linear - Square.
Brass key steel. Square brass bar that can be used for keysteel or for small brass construction projects.
Related Information:
303, 304 and 316 grade key steel. Square stainless steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. This category may be available in the new MBA online store at
Keysteel Lengths - Square - Stainless Steel.
Related Information:
Lubrication Groove. Bearings sold separately. Larger sizes available on request. Use with steel bearing inserts for cast iron housings. This category may be available in the new MBA online store at
Housings - Bearing - Flanged - Square - Cast Iron.
Related Information:
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Related Information:
Each 200 pack comes with a Post Combination Driver Bit. Metric only.
Related Information:
Grade 8 hreat treated alloy steel. All screws are threaded to the head.
Grade 8 hreat treated alloy steel. All screws are threaded to the head.
Also known as snapper pins
Related Information:
Zinc plated steel 7.94mm (5/16in.) square shank.
This category may be available in the new MBA online store at
Handles - Tee.
Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.
Zinc finished iron/steel construction. Has 5/16in. Square shank.
Form A has rounded ends. Form B has square ends. Form AB has one end rounded and one end square. DIN6885
Related Information:
Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length. This category may be available in the new MBA online store at
Springs - Die - Imperial - Heavy Duty.
Related Information:
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length. This category may be available in the new MBA online store at
Springs - Die - Imperial - Medium Duty.
Related Information:
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length. This category may be available in the new MBA online store at
Springs - Die - Imperial - Extra Heavy Duty.
Related Information:
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length. This category may be available in the new MBA online store at
Springs - Die - Imperial - Medium-Heavy Duty.
Related Information:
Carefully turned to provide 0.076mm (0.003in) concentricity ID to OD. Round OD with with a uniform hex hole broached from one end to the other.
Used to replace screws where the need to remove the pin is unlikely.
Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
Related Information:
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at
Snap Buttons - Double End.
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at
Snap Buttons - Flat Type.
Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.
Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.
Related Information:
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138615
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.