Small Parts & Bearings - an MBA company

Tools Pullers Dowel Remover And Setter Categories


Tools Pullers


Tools - Pullers - Dowel Remover and Setter
Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set.

Related Information:


Tools - Pullers - Small
Tools - Pullers - Small

Also see combined categories:
All Tools

Small pullers for miniature bearings, gears, pulleys, sprockets and other pressed on parts.



Tools - Mandrels and Nosepieces - For Klik Rivet Nuts
Tools - Mandrels and Nosepieces - For Klik Rivet Nuts

Also see combined categories:
All Tools

Required for Thread Setter Tool

Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.

Related Information:


Inserts - Rivet Nuts - Klik - Ribbed
Inserts - Rivet Nuts - Klik - Ribbed

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These blind threaded inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.

Related Information:


Inserts - Rivet Nuts - Klik - Standard
Inserts - Rivet Nuts - Klik - Standard

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.

Related Information:


Inserts - Rivet Nuts - Klik - Threadsert
Inserts - Rivet Nuts - Klik - Threadsert

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.


Rod - Drill Blanks
Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Pins - Dowel Bushings
Pins - Dowel Bushings

Also see combined categories:
All Dowel Bushings

Series DB100 Spirol

Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12.

Related Information:


Pins - Dowel - Extractable
Pins - Dowel - Extractable

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6. Din 7979.

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin to overcome the problem of pressure build up by trapped air. Hardness 55-62 HRC, HV550-650. Extractable pins may or may not have a flat to vent pressure when pulling. Also known as parallel pins.

Related Information:


Pins - Dowel - Extractable - With Vent
Pins - Dowel - Extractable - With Vent

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6 with a ground flat along one edge

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin. Hardness 55-62 HRC, HV550-650. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 303-304 Stainless - Chamfered End
Pins - Dowel - Standard - 303-304 Stainless - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 303/304 Grade Stainless - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends
Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 303/304 Grade Stainless- DIN7

Rounded end dowel pins are measured from the start of the edge rounding. This allows the pin to completely fill the hole after you grind off the rounded end. Diameter tolerances are m6. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 316 Stainless - Chamfered End
Pins - Dowel - Standard - 316 Stainless - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 316 Grade - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 316 Stainless - Rounded Both Ends
Pins - Dowel - Standard - 316 Stainless - Rounded Both Ends

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 316 Grade - DIN7

Diameter tolerances are m6. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 416 Stainless - Chamfered End
Pins - Dowel - Standard - 416 Stainless - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 416 Grade - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - Chamfered End
Pins - Dowel - Standard - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - Unhardened Steel - Rounded Both Ends
Pins - Dowel - Standard - Unhardened Steel - Rounded Both Ends

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - DIN7

Diameter tolerances are m6. Also known as parallel pins.

Related Information:


Balsa Wood - Dowel
Balsa Wood - Dowel


Round section dowel. Delivery Surcharges May Apply on Selected Items

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Related Information:


Pins - Groove
Pins - Groove

Also see combined categories:
All Groove Pins

Non threaded press fit fastener that doesn't require a reamed hole as do dowel pins.Commonly used in place of taper pins.

An economic method of fastening without the need for precision drilled and reamed holes. Recommended hole tolerance is H11. Total length may be slightly longer than the nominal length. Expanded portion of the pin is compressed into the hole a few thousands of an inch wider than the nominal pin diameter. Radial forces lock the pin securely into the drilled hole.

Related Information:


Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:


Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:


Tools - Installation - Spring Locating Pin
Tools - Installation - Spring Locating Pin

Also see combined categories:
All Tools

Installation tools designed to ease installation of spring locating pins.



Tools - Installation - Indexing Plunger
Tools - Installation - Indexing Plunger

Also see combined categories:
All Tools

Two slots provided in the upper end of the body and are accessible when the knob is in the retracted position. For use with WIP type plungers.



Tools - Thread Insert - Power Drive - EZ-Lok
Tools - Thread Insert - Power Drive - EZ-Lok

Also see combined categories:
All Tools

Made from stress proof steel. The power drive tool is used for volume installation of EZ-LOK thread inserts.



Tool Steel - 496 Oil Hardening - Flat Stock
Tool Steel - 496 Oil Hardening - Flat Stock


General purpose tool steel with good wear resistance, durability and machinability

Dimensionally stable chromium, tungsten and vanadium electric furnace toolsteel can be used for intricate work. Low 787 to 815 oC (1450-1500 F) hardening range makes it easy to harden. Fully spheroidised and annealed for uniform carbide size and easy machining. Each piece is individually wrapped and clearly marked with size, analysis and correct hardness and tempering information. Edge squareness 0.003 mm per mm. Finish is 0.0008mm (0.000032 inch).


Tools - Sealing Plug Installation
Tools - Sealing Plug Installation

Also see combined categories:
All Tools

Hand installation tools for sealing plugs



Tools - Keys - Hex
Tools - Keys - Hex

Also see combined categories:
All Tools

Long and short series allen keys.

Alloy Steel Heat Treated. Short Arm DIN 911. Long Arm ANSI B18.3 1986.


Tools - Punches - Pilot
Tools - Punches - Pilot

Also see combined categories:
All Punches
All Tools

Vanadium Steel. Tolerance is +0.000 / -0.254mm



Tools - Punches - Pilot - Sets
Tools - Punches - Pilot - Sets

Also see combined categories:
All Punches
All Tools

Vanadium Steel. Tolerance is +0.000 / -0.254mm



Tools - Sets
Tools - Sets

Also see combined categories:
All Tools

General tool sets, screwdriver sets, tap sets, dies sets, hex key sets.



Tools - Sets - Foldup
Tools - Sets - Foldup

Also see combined categories:
All Tools

Handy sets of popular sized hex and torx wrenches.

Highest quality 8650 chrome nickel alloy heat treated and finished to resist rust. Ergo style has colour coded handles. Classic style has one piece steel grip handle. Conveniently folds up like a jack knife when not in use.


Tools - Soldering Irons
Tools - Soldering Irons

Also see combined categories:
All Tools



Tools - Tubing Work
Tools - Tubing Work

Also see combined categories:
All Tools

Tube benders and cutters


Related Information:


Tools - Wire Working
Tools - Wire Working

Also see combined categories:
All Tools

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.


Related Information:


Tools - Circlip Pliers - External
Tools - Circlip Pliers - External

Also see combined categories:
All Tools

External circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.


Tools - Circlip Pliers - Internal
Tools - Circlip Pliers - Internal

Also see combined categories:
All Tools

Internal circlip pliers including standard and ratchet type.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.


Tools - Circlip Pliers - Reversible
Tools - Circlip Pliers - Reversible

Also see combined categories:
All Tools

Reversible circlip pliers for internal and external circlips.

Size ranges shown are for standard circlips. May also suit some non standard sizes outside the range shown. The sizes shown are for reference only. If you are buying a set of pliers to suit one particular job, please enquire as to the suitability of the pliers selected.


Tools - E-Clip Applicators
Tools - E-Clip Applicators

Also see combined categories:
All Tools

Assists with assembly e-clip application. Each tool is designed to suit one or two sizes only.


Tools - Drill Bits
Tools - Drill Bits

Also see combined categories:
All Tools

Micro miniature drill bits starting from 0.32mm up to larger standard sizes. Sutton - PN - Bordo.

Lengths shown are based on standard stock but may vary.


Tools - Drill Bits - Reduced Shank


Reduced Shanked Drill Bits



Tools - Files
Tools - Files

Also see combined categories:
All Tools

Files and file sets. File card brush. Needle files.

Lengths shown are based on standard stock but may vary.


Tools - Rotary Files - Aluminium Cut
Tools - Rotary Files - Aluminium Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel.


Tools - Rotary Files - Double Cut
Tools - Rotary Files - Double Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel.


Tools - Rotary Files - Standard Cut
Tools - Rotary Files - Standard Cut

Also see combined categories:
All Tools

Used for deburring and smoothing metals.

Made from Heat treated steel.


Tools - Deburring
Tools - Deburring

Also see combined categories:
All Tools



Tools - Body and Post Reamers
Tools - Body and Post Reamers

Also see combined categories:
All Tools

Body reamers, antenna post reamers

Lengths shown are based on standard stock but may vary.


Tools - Chain Breaker
Tools - Chain Breaker

Also see combined categories:
All Tools

Used to break roller chain at the pins



Tools - Drills
Tools - Drills

Also see combined categories:
All Tools

Hobby drill for very small bits.



Tools - General
Tools - General

Also see combined categories:
All Tools

Butane Torch, Inspection Mirror, Mini Sandblaster, Nibbling Tool, Plastic Scriber, Pick Up Tool Set, Hex Driver Handle for Insert Bits

X-Acto Knife Sets - Pin Vises - Screw Pitch Gauges and more.


Tools - Gift Ideas
Tools - Gift Ideas


Includes Stylus, Magnetic Finder, Multitool, Laser Pointers



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124370 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124370 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.