Small Parts & Bearings - an MBA company

TIPS CATEGORIES


Tips - Round
Tips - Round


Plastic tips fit over outside of tubing.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.


Tips - For Kite Rods
Tips - For Kite Rods


Plastic tips fit over outside of rods and tubes for kites and other uses.

Joiners and connectors suitable for rod and tubing as well as for kites.


Screws - Thumb - Flat Tip
Screws - Thumb - Flat Tip

Also see combined categories:
All Thumb Screws



Screws - Thumb - Nylon Tip
Screws - Thumb - Nylon Tip

Also see combined categories:
All Thumb Screws

Soft nylon tip to help prevent damage to parts being locked.



Socket Set Screws - Flat Tip - Aligning - Carbon Steel
Socket Set Screws - Flat Tip - Aligning - Carbon Steel

Also see combined categories:
All Flat Aligning Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:


Socket Set Screws - Flat Tip - Aligning - Stainless Steel
Socket Set Screws - Flat Tip - Aligning - Stainless Steel

Also see combined categories:
All Flat Aligning Tip Grub Screws
All Grub Screws

Grub screws with a pivoting flat tip. The ball can pivot up to 9 Deg. To fasten the object securely to misaligned parts.

Also known as a flat ball tip set screw or a clamping screw.

Related Information:


Socket Set Screws - Flat Tip - Fixed - DIN913
Socket Set Screws - Flat Tip - Fixed - DIN913

Also see combined categories:
All Special Hard Tip Grub Screws
All Grub Screws

Flat tip grub screws


Related Information:


Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913
Socket Set Screws - Flat Tip - Titanium - Ti-Gr5 - Ti-6Al4v - DIN913

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN913 grub screws with flat end. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:




Socket Set Screws - Diamond Knurled Tip - Carbon Steel
Socket Set Screws - Diamond Knurled Tip - Carbon Steel

Also see combined categories:
All Special Hard Tip Grub Screws
All Diamond Knurled Tip Grub Screws

Grub screws that grip rough shafts.


Related Information:


Socket Set Screws - Diamond Knurled Tip - Stainless Steel
Socket Set Screws - Diamond Knurled Tip - Stainless Steel

Also see combined categories:
All Special Hard Tip Grub Screws
All Diamond Knurled Tip Grub Screws

Grub screws that grip rough shafts.


Related Information:


Socket Set Screws - Rolling Ball Tip - Carbon Steel
Socket Set Screws - Rolling Ball Tip - Carbon Steel

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:


Socket Set Screws - Rolling Ball Tip - Stainless Steel
Socket Set Screws - Rolling Ball Tip - Stainless Steel

Also see combined categories:
All Rolling Ball Tip Grub Screws
All Grub Screws

Rolling ball tip for locating into a hole

Rolling ball set screws are not designed to bear heavy loads. Used to lightly fasten fragile work pieces. We would recommend testing if you plan to use them in a load bearing application.

Related Information:


Books - Hobby - Mousetrap Vehicles
Books - Hobby - Mousetrap Vehicles

Also see combined categories:
All Books

Tips and tricks and how-to guides for Mousetrap powered cars and boats

Activities guide and plans.

Related Information:


Socket Set Screws - Acetal Tipped - Alloy Steel
Socket Set Screws - Acetal Tipped - Alloy Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:


Socket Set Screws - Acetal Tipped - Stainless Steel
Socket Set Screws - Acetal Tipped - Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Acetal tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:


Socket Set Screws - Nylon Tipped - Alloy Steel
Socket Set Screws - Nylon Tipped - Alloy Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:


Socket Set Screws - Nylon Tipped - 304 Stainless Steel
Socket Set Screws - Nylon Tipped - 304 Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Nylon tipped grub screws. Soft tip compresses into threads to become self locking. Helps to prevent shaft damage.


Related Information:


Screws - Self Tapping - Pan Head - 316 Stainless
Screws - Self Tapping - Pan Head - 316 Stainless

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - Zinc Plated
Screws - Self Tapping - Pan Head - Zinc Plated

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Screws - Self Tapping - Pan Head - 302 - 304 Stainless

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - Steel - Black Oxide
Screws - Self Tapping - Pan Head - Steel - Black Oxide

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round


Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.

Related Information:


Wrench - Plunger
Wrench - Plunger


Provides fast installation and removal of ball, spring and stubby spring plungers with slots at the spring loaded end. Prevents damage that can occur when a standard screwdriver is used by providing a recess for the tip whilst the body is being rotated.



Hooks - Lifting - Swivel and Pivot
Hooks - Lifting - Swivel and Pivot


Full swivel and 180o pivot with double ball bearings for smooth tilting, twisting and turning.

Eliminates jerking of the lifting point. Suitable for sling system including hook, eye or loop. Has non protruding hook tip and is extremely durable. Forged safety latch which engages in the top of the hook protecting against lateral bending. Coiled double leg stainless steel spring protected by latch design.


Socket Set Screws - Brass Tipped - Alloy Steel
Socket Set Screws - Brass Tipped - Alloy Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.


Related Information:


Socket Set Screws - Brass Tipped - Stainless Steel
Socket Set Screws - Brass Tipped - Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Brass tipped grub screws. Helps to prevent shaft damage on harder shafts.


Related Information:


Socket Set Screws - Solder Tipped - Stainless Steel
Socket Set Screws - Solder Tipped - Stainless Steel

Also see combined categories:
All Soft Tipped Grub Screws
All Grub Screws

Solder tipped grub screws. Allow fine adjustment and spreads over the contacting surface so as not to mark or deform it.


Related Information:


Screws - Cap - Socket - Alloy Steel - Brass Tipped
Screws - Cap - Socket - Alloy Steel - Brass Tipped

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Brass tipped socket cap screws in alloy steel



Screws - Cap - Socket - Alloy Steel - Nylon Tipped
Screws - Cap - Socket - Alloy Steel - Nylon Tipped

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Nylon tipped socket cap screws in alloy steel



Screws - Cap - Socket - 18-8 Stainless Steel - Nylon Tipped
Screws - Cap - Socket - 18-8 Stainless Steel - Nylon Tipped

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Nylon tipped socket cap screws in 18-8 Stainless Steel - similar to 316 stainless



Spa Jet Motor Multiple Parts
Spa Jet Motor Multiple Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Clutches - Slip - Inline
Clutches - Slip - Inline

Also see combined categories:
All Slip Clutches

Multiplate Design.

Fully adjustable within rating limits. Low stick / slip ratio. Continuous slip within dissipation limit. Zinc plated steel housing with brass plates. Proprietary non-asbestos friction material.

Related Information:


Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - AT5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

HTD 5mm series Flanges can be used with this stock.

Related Information:


Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  2.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 2mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium

Also see combined categories:
All H 12.7mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  8.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 8mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 9.525mm Pitch - L - STOCK - Aluminium
Pulleys - Timing -  9.525mm Pitch - L - STOCK - Aluminium

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys
All L 9.525mm Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium
Pulleys - Timing -  2.032mm Pitch - MXL - STOCK - Aluminium

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:


Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium
Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium

Also see combined categories:
All 10mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
Pulleys - Timing -  2.500mm Pitch - T2.5 - STOCK - Aluminium


For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium
Pulleys - Timing -  5.000mm Pitch - T5 - STOCK - Aluminium

Also see combined categories:
All 5mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 125482 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 125482 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.