Nickel plated D Rings
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at
Pins - Clik - Carbon Steel.
Related Information:
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at
Pins - Clik - Mild Steel.
Related Information:
Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.
Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated. This category may be available in the new MBA online store at
Pins - Clik - Stainless Steel 316 Grade.
Related Information:
Zinc plated hard drawn steel wire rings.
Nickel plated round rings
Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle.
Related Information:
Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).
Related Information:
Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).
Related Information:
Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination. Also known as Heim Joints
Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination.
Forged zinc plated carbon steel.
Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Spyraflo electroless nickel plated aluminium housing with stainless steel coated self aligning acetal bearings.
See links at bottom of web page for more information. +/- 5% Static Alignment. Electroless nickel plated aluminium housing. Corrosion Resistant. Light weight.
Related Information:
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at
Springs - Drawbar - Zinc Plated.
Related Information:
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Wave Washers - All Materials.
Single ball bearings units for conveyor systems
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading. This category may be available in the new MBA online store at
Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated.
Single ball bearings units for conveyor systems
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading. This category may be available in the new MBA online store at
Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated.
Compliance with UL 1950 and EN 60950 codes for access areas. Ratchet mechanism allows screw to be tightened down by hand, but a tool is needed to loosen.Fully retractable captive to the panel and spring ejected.
Press in style. Bright chromate zinc plated, case hardened steel with aluminium knob and stainless steel spring. Knobs available either slotted or no.2 phillips. This category may be available in the new MBA online store at
Screws - Captive - Retractable - Steel.
Oil impregnated porous bronze sheet.
Including miniature sizes down to 8mm from stock and even smaller available.
Related Information:
Zinc plated spring steel DIN1481/ISO8752.
Also known as sel-lok and bissell pins. This category may be available in the new MBA online store at
Pins - Roll - Zinc Plated.
Related Information:
Single ball bearings units for conveyor systems
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121
oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260
oC (500 Deg F). 302 stainless steel is slightly magnetic. This category may be available in the new MBA online store at
Springs - Extension - Music Wire.
Related Information:
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121
oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260
oC (500 Deg F). 302 stainless steel is slightly magnetic. This category may be available in the new MBA online store at
Springs - Extension - Stainless Steel.
Related Information:
Includes bearings.
Housing: 080 M40 (C45) Steel Zinc Plated Natural. Bearing: Steel Shields: (ZZ) Steel. Bearing housings are supplied with a bearing fitted. Bearing adhesive may be used during assembly. Fixing using H holes for a capscrew fixing or THD tapped hole to fasten from the opposite direction. This category may be available in the new MBA online store at
Housings - Bearing - Single Assembly.
Match with a suitable E-Clip or Circlip to suit groove size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. Grooved end to suit retaining clip instead of pin. This category may be available in the new MBA online store at
Pins - Clevis - Zinc Plated - Groove Locking.
Related Information:
Match with a suitable R-Clip or Spilt Pin - pin size shown in listings
In addition to retaining parts on a shaft or axle, clevis pins can also be used as light duty axles, spring holders or even fishing line weights. Sinc plated low carbon steel. This category may be available in the new MBA online store at
Pins - Clevis - Zinc Plated - Pin Locking.
Related Information:
Split pins.
Hole size indicated is maximum for the pin to be effective. If the pin you require is not available, you may be able to use the next larger diameter so long as the pin is smaller than your hole size. Longer lengths may be cut back to a suitable length. This category may be available in the new MBA online store at
Pins - Split - Zinc Plated.
Related Information:
Incredibly strong attraction and repulsion. Neodymium-Iron-Boron encased in nickel jackets to protect the brittle magnet material and prevent corrosion.
High strength to weight ratios. Commonly used in miniature applications such as linear actuators, sensing applications, gyroscopes, flow meters, recording devices, pacemakers and alternators. Temperature range -73
oC to 93
oC. Size tolerances +/- 0.13. This category may be available in the new MBA online store at
Magnets - Rare Earth - Plated.
Related Information:
Plated alloy steel
UNC - UNF - METRIC.
Related Information:
UNC - UNF - METRIC - Alloy Steel.
Related Information:
For countersunk screws.
Related Information:
Zinc plated carbon steel key steel. Rectangular steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour. This category may be available in the new MBA online store at
Keysteel Lengths - Rectangular - Zinc Plated.
Related Information:
Zinc plated carbon steel key steel. Square steel bar that can be used for keysteel or for small construction projects.
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour. This category may be available in the new MBA online store at
Keysteel Lengths - Square - Zinc Plated.
Related Information:
Precision ground shafting. AISI C1060 and chrome plated for corrosion resistance. Case hardened and recommended for use with precision bearings. Ends are not plated.
Designed with high grade nitrile rubber and zinc plated steel.
Swivel movement plus or minus 7
o for stable support on inclined floors. Nitrile rubber base helps ensure stability. This category may be available in the new MBA online store at
Mounts - Anti-Vibration - Zinc Plated Steel.
Related Information:
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
Levelling adjusters. Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics.
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.
Zinc plated steel 7.94mm (5/16in.) square shank.
This category may be available in the new MBA online store at
Handles - Tee.
UNC - UNF - METRIC - BSW. Also known as booker rod.
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138615
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.