Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Threaded Rod Unthreaded Centre Steel Categories
Threaded Rod
Threaded Rod - Unthreaded Centre - Steel
UNC Small range only. Threaded each end 38.1mm (1.5 inches) and unthreaded in the centre.
Related Information:
You may also be interested in
Allthread
Threaded Rod - Allthread - Plastic
UNC - UNF - METRIC - Nylon and PVC. Also known as booker rod.
Light Weight. Non Corrosive. Vibration Resistant.
Threaded Rod - Allthread - Stainless Steel - 304
UNC - UNF - METRIC - 303 and 304 grades. Also known as booker rod.
Threaded Rod - Allthread - Stainless Steel - 316
UNC - UNF - METRIC - 316 grade. Also known as booker rod.
Threaded Rod - Allthread - Steel - Plain
UNC - UNF - METRIC - BSW - Includes plain mild steel and high tensile. Also known as booker rod.
Bungs and Caps - Reversible - Round
Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.
Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges.
Related Information:
Collars - Threaded - Clamp Type - Stainless Steel
Offer full radial holding power without marring the shaft.
Related Information:
Collars - Threaded - Clamp Type - Steel
Offer full radial holding power without marring the shaft.
Related Information:
Attachments - Threaded Plugs
Use with synchromesh or standard miniature cable
F and L dimensions are obtained after swaging. Before swaging the fitting is round.
Related Information:
Studs - Threaded - Driver
Medium carbon steel with black oxide finish. 125,000 PSI minimum tensile strength. With wrench flats in the centre.
Studs - Threaded - Standard
Metric and imperial sizes. Steel and 303 stainless steel.
Yield strength 100,000 PSI. Tensile strength 125,000 PSI.
Knobs - Ball - Threaded - Phenolic
Moulded from black or red phenolic resin.
Light Weight. Thermal insulating. Non corrosive.
Related Information:
Knobs - Ball - Threaded - Plastic with Knurl
Brass threaded insert. Knurled circumference to assist with grip.
Related Information:
Knobs - Ball - Threaded - Polished Aluminium
DIN319 Tapped aluminium
Polished with a flash chrome finish.
Related Information:
Knobs - Ball - Threaded - Polished Brass
CDA 360 Free Machining Brass
Polished balls are fully finished and suitable for decorative and display purposes.
Related Information:
Knobs - Ball - Threaded - Soft Touch
Rugged thermoplastic construction with a soft feel. Moulded with a soft rubber shell providing a sure grip. Zinc plated steel insert.
Related Information:
Knobs - Ball - Threaded - Stainless Steel
303 stainless steel (European grade 1.4305)
Related Information:
Knobs - Ball - Threaded - Thermoplastic
With moulded plastic threads, or metalic threaded inserts - brass or steel.
Related Information:
Knobs - Lever - Threaded Bore
Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert.
Related Information:
Plungers - Ball - Threaded - 303 Stainless Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball - Threaded - 303 Stainless Steel - Nylon Balls
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball - Threaded - 303 Stainless Steel with Threadlock
With Long-Lok thread locking compound to prevent loosening
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball - Threaded - Acetal Body and Nylon Ball
For use in plastic applications or when the application requires as few metal parts as possible.
Electrical isolation. Highly durable acetal body with stainless steel spring allows use in corrosive environments. Plunger wrenches will not work with these.
Plungers - Ball - Threaded - Acetal Body with Stainless Ball
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball - Threaded - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball - Threaded - Steel Body - Nylon Ball
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball - Threaded - Steel Body - Stainless Ball
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball - Threaded - Steel - Threadlock
With Long-Lok thread locking compound to prevent loosening
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Ball - Threaded - With Limit Switch
Suitable for locking and releasing a device by using a built-in electrical switch. Stainless steel spring, nickel plated body, hardened steel ball.
Supply Cable : Grey for normally open contacts, black for normally closed. Oil resistant. Max tensile load 20N. Working Temperature: -10 deg C to 80 deg C. Electrical Supply : 20 mA DC Max. Switching load recommended 5-10 mA. Voltage : 12-24V Supply Cable 3mm - 2 Phase, 2 metres long. Safety Standard : IP40 Average Switch Life Span : 3 milliion switchings.
Plungers - Spring - Threaded Adapter - Locking - Stainless
Use your own handle on the thread provided.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded Adapter - Locking - Steel
Use your own handle on the thread provided.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded Adapter - Non Locking - Stainless
Use your own handle on the thread provided.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded Adapter - Non Locking - Steel
Use your own handle on the thread provided.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Stainless
303 Stainless Steel.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Stainless-Acetal
303 Stainless Steel body and acetal nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Stainless and Plastic
303 Stainless Steel.
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Steel
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Steel-Acetal
Acetal nose with steel body
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Steel-Acetal - Hex Nose
Steel body and acetal hex nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Steel and Plastic
Plastic nose with steel body
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Steel - Hex Nose
Steel body and steel hex nose
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Steel - Hi-Life Flat Hexagonal Nose
Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.
Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.
Plungers - Spring - Threaded - Steel - Long Stroke
With Long-Lok thread locking compound to prevent loosening
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Plungers - Spring - Threaded - Steel - Threadlock
With Long-Lok thread locking compound to prevent loosening
Items shown with Long-Lok have a dry threadlocking sealant applied to thread.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 127000 products in 2359 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
