Small Parts & Bearings - an MBA company

Covid-19 Update!! Current supply status.

Trading by online order and email.
Outbound Deliveries: Allow a few extra days for both Australian and overseas deliveries.
Pre-orders and Backorders: Allow a few extra days due to quarantine precautions.

TEN3 REID


Cross Referenced Part Numbers



MLV-3370-1590C-NPP Reid part number TEN-30





Load: 3370. Thread Size: 5/8-11 UNC (15.875mm). Hex Flats (B): 22.225.

Online Price: 0.00     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     



MLV-1110-1590C-NPP Reid part number TEN-3





Load: 1110. Thread Size: 5/8-11 UNC (15.875mm). Hex Flats (B): 22.225.

Online Price: 0.00     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     


Category Matches

Tensioners


Tensioner - Adjustable Screw
Tensioner - Adjustable Screw

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Uses a screw adjustment for positive precise tensioning.

Idler shaft and pulleys not included with tensioner.

Related Information:


Tensioner - Drive - Adjustable Angle
Tensioner - Drive - Adjustable Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Fixed base with adjustable arm through 360o.

Idler shaft and pulleys not included with tensioner.

Related Information:


Tensioner - Drive - Adjustable Flanged
Tensioner - Drive - Adjustable Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. With flanged base that can be mounted in a tight area.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:


Tensioner - Drive - Double Adjust - Base Mount
Tensioner - Drive - Double Adjust - Base Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Adjusting slot assists with precise adjustments.

Idler shaft and pulleys not included with tensioner. Rotating arm gives operator 360o controlled tensioning. Serrated teeth to prevent slippage once tightened.

Related Information:


Tensioner - Drive - Single Adjusting - Shaft Mount
Tensioner - Drive - Single Adjusting - Shaft Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Mounts on any free point of a fixed shaft allowing controlled tensioning around 360o.

Idler shaft and pulleys not included with tensioner.

Related Information:


Tensioner - Fixed Angle
Tensioner - Fixed Angle

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Can be mounted on top of any flat surface to provide horizontal tenaioning.

Idler shaft and pulleys not included with tensioner.

Related Information:


Tensioner - Fixed Flanged
Tensioner - Fixed Flanged

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Compact design allows mounting where space is limited.

Idler shaft and pulleys not included with tensioner.

Related Information:


Tensioner - Heavy Duty - Type 2
Tensioner - Heavy Duty - Type 2

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted to the side at 90o and is anchored by set screws.

Related Information:


Tensioner - Heavy Duty - Type 3
Tensioner - Heavy Duty - Type 3

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Shaft is located in the centre of the tensioner between the adjusting slots.

Related Information:


Tensioner - Heavy Duty - Type 4
Tensioner - Heavy Duty - Type 4

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 152.4mm travel through the use of the adjusting slots. Head is drilled and tapped to accept 50.8mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner. Shaft is mounted straight out from face and anchored by set screws. Adjusting slots are parallel to each other.

Related Information:


Tensioner - Horizontal Mount
Tensioner - Horizontal Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel and is mounted 90o to the length of the part. Both ends are tapped so the shaft can be threaded on either side of the tensioner.

Idler shaft and pulleys not included with tensioner. Hole is tapped to accept 38.1mm diameter idler shaft (ordered separately).

Related Information:


Tensioner - Vertical Mount
Tensioner - Vertical Mount

Also see combined categories:
All Tensioner Arms

Use with idler shafts and idler pulleys. Has 88.9mm travel through the use of the vertical slot. Head is drilled and tapped to accept 38.1mm diameter idler shaft (ordered separately).

Idler shaft and pulleys not included with tensioner.

Related Information:


Tension Bushings


Bushings - Tension
Bushings - Tension


Like a heavy duty roll pin.

Made of a high carbon spring steel with high elasticity, resilience and wear characteristics. Designed to replace solid steel tubular and case hardened bushings because they are close tolerance, self-retaining and through hard. Insertion can be easily accomplished with a hammer and drift. Ideal for high load/low-speed operation in articulating or continuous applications.


Washers Flat Metallic


Washers - Flat - High Tensile
Washers - Flat - High Tensile

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Grade 8 high tensile washers

ASTM F436 1985. Please note! Tolerances for commercial grade washers are much larger than for precision washers.

Related Information:


Pins Ball Lock


Pins - Ball Lock - High Tension - Industrial
Pins - Ball Lock - High Tension - Industrial

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel shank. CRES440C stainless steel spindle. Four balls offer greater pullout strength. Also called detent pins.

Positive lock detent pins.

Related Information:


You may also be interested in

Hoist Rings


Screws - For Rings - Hoist
Screws - For Rings - Hoist


High tensile cap screws for use with stationary hoist rings


Related Information:


RC Spare Parts


Antennas and Aerials
Antennas and Aerials


Antennas and Aerials for Remote Control

Tubes, Antennas, Aerials for Remote Controls.


Shaft Extenders and Reducers


Extenders - Shaft
Extenders - Shaft


Miniature and large shaft extenders and reducers. Used to increase or reduce the diameter, or increase the length of shafts.

Also known as shaft increasers or shaft reducers.

Related Information:


Balls Metallic


Balls - Tungsten Carbide
Balls - Tungsten Carbide

Also see combined categories:
All Metallic Balls

Extreme hardness and wear resistance.

Tolerances available on request. Precision Grade: Grade 25. Hardness: Rockwell A: 91.5 (Approx 77 Rockwell C). Extreme hardness and wear resistance. Specific Gravity: 14.95.

Related Information:


Springs Extension


Springs - Extension - Music Wire
Springs - Extension - Music Wire

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:


Springs - Extension - Stainless Steel
Springs - Extension - Stainless Steel

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:


Bearings Thrust


Washers - Self Aligning - Sets - Plastic
Washers - Self Aligning - Sets - Plastic


Spherical Seat Washers

Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.

Related Information:


Chain and Sprockets Roller


Chain - Roller - Metal - Duplex - Links
Chain - Roller - Metal - Duplex - Links

Also see combined categories:
All Roller Chain Links

High tensile steel. Double row.



Springs Die


Springs - Die - Imperial - Extra Heavy Duty
Springs - Die - Imperial - Extra Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Related Information:


Springs - Die - Imperial - Heavy Duty
Springs - Die - Imperial - Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Related Information:


Springs - Die - Imperial - Medium Duty
Springs - Die - Imperial - Medium Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.

Related Information:


Springs - Die - Imperial - Medium-Heavy Duty
Springs - Die - Imperial - Medium-Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.

Related Information:


Springs - Die - Metric - Heavy Duty
Springs - Die - Metric - Heavy Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded red

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Springs - Die - Metric - Light Duty
Springs - Die - Metric - Light Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded green

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Springs - Die - Metric - Medium Duty
Springs - Die - Metric - Medium Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded blue

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Tooling Balls


Balls - Checking - Tungsten Carbide
Balls - Checking - Tungsten Carbide

Also see combined categories:
All Fixture and Checking Balls

RC 65-68

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:


Balls - Fixture - Tungsten Carbide
Balls - Fixture - Tungsten Carbide

Also see combined categories:
All Fixture and Checking Balls

RC 65-68

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:


Catches


Clamps - Lorenz
Clamps - Lorenz


Patented quick clamp is ideal for door openings on bins, hoppers, tanks and manholes. T-Handle allows torque without tools. The one piece unit is made from highly polished 304 stainless steel.

Full 50.8mm adjustment. 180o pivot when disengaged leaving access doorway unobstructed. Will not loosen through vibration. Brackets supplied for easy installation.


Shaft Extenders and Reducers


Reducers - Bore
Reducers - Bore


Inch to Metric / Inch to Inch / Metric to Metric. Brass reducing bushes.

S = Recommended set screw positions. C = Recommended position for single set screw fastening. T = Recommended position for tangential screw in clamp hub.

Related Information:


Studs


Studs - Shoulder - Machine
Studs - Shoulder - Machine


Machine shoulder studs can be used with idlers or tensioner arms



Catches


Catches - Compression Spring
Catches - Compression Spring


Three internal compression springs supply up to 30kg of spring tension. Available as padlockable or with secondary catch.

Spring tension compensates for gasket set. Provides exact tension for water tight and air tight seals.


Knobs Thumb


Knobs - Thumb - With Cap Screw
Knobs - Thumb - With Cap Screw

Also see combined categories:
All Thumb Knobs
All Knobs

Four types and four colours.

Complete with high tensile alloy steel screw. If stainless steel screws required please order cap screws separately and knobs without screw.

Related Information:


Fastening Bushings


Bushings - Drill - Liner Type - Headless
Bushings - Drill - Liner Type - Headless

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.

Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point.


Bushings - Drill - Press-fit - Headless
Bushings - Drill - Press-fit - Headless

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.



Bushings - Drill - Press-fit - Headless - Tungsten Carbide
Bushings - Drill - Press-fit - Headless - Tungsten Carbide

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig.

Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point.


Bushings - Drill - Slip - With Head
Bushings - Drill - Slip - With Head

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.

Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point.


Studs


Studs - Threaded - Driver
Studs - Threaded - Driver


Medium carbon steel with black oxide finish. 125,000 PSI minimum tensile strength. With wrench flats in the centre.



Washers Lock


Washers - Lock - Split - Titanium CP Grade 1
Washers - Lock - Split - Titanium CP Grade 1

Also see combined categories:
All Split Lock Washers
All Lock Washers

CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Dimensions are nominal and may vary between batches. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. Washers designed to be used to help prevent nuts from vibrating loose.


Tools Threading


Tools - Die Nuts
Tools - Die Nuts

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.



Tools - Taps - High Speed Steel - Extension
Tools - Taps - High Speed Steel - Extension

Also see combined categories:
All Taps
All Tools

Intermediate small shank spiral point extension taps 150mm long



Balls Plastic


Balls - Plastic - Acetal
Balls - Plastic - Acetal

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

High intensity strength, rigidity, outstanding resistance to abrasion and most solvents.

Tolerances available on request. Acetal Copolymer. High intensity strength, rigidity, outstanding resistance to abrasion and most solvents. Opaque White. Specific Gravity: 1.4.

Related Information:


Allthread


Threaded Rod - Allthread - Steel - Plain
Threaded Rod - Allthread - Steel - Plain

Also see combined categories:
All Threaded Rod

UNC - UNF - METRIC - BSW - Includes plain mild steel and high tensile. Also known as booker rod.



Fastening Bushings


Bushings - Drill - Press-fit - Standard Head
Bushings - Drill - Press-fit - Standard Head

Also see combined categories:
All Drill Bushings

Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.



Nuts Hex


Nuts - Hexagonal - Titanium - CP Grade 1
Nuts - Hexagonal - Titanium - CP Grade 1

Also see combined categories:
All Nuts

Metric Only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.


Snap Buttons


Snap Buttons - Double End
Snap Buttons - Double End

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126920 products in 2505 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126920 products in 2505 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.