Small Parts & Bearings - an MBA company

Covid-19 Update!! Current supply status.

Trading by online order and email.
Outbound Deliveries: Allow a few extra days for both Australian and overseas deliveries.
Pre-orders and Backorders: Allow a few extra days due to quarantine precautions.

TB17 ROUTERBEARING


Cross Referenced Part Numbers



6001-ZZ Router Bearing part number TB17





ID (d): 12.000. OD (D): 28.000. Width (B): 8.000.

Online Price: 0.00     
Stock: Pre-Order (due 2 weeks)     
Due dates are estimates only     


Category Matches

Gearheads Inline


Gearheads - Inline - Planetary - Size 17 - Precision
Gearheads - Inline - Planetary - Size  17 - Precision

Also see combined categories:
All Inline Planetary Gearheads

Use with NEMA Size 17 Motors.

Stainless Steel housing - Heat Treated Steel Gears - Sealed ball bearings - Aluminium mounting flange. Shaft loading 25.4kg (57 lbs) radial and 24.5kg (55 lbs) axial / Maximum input speed 6500 rpm. Min. Efficiency ---- Single Stage : 90%, Double Stage : 85%. Max Backlash ---- Single Stage : 6 arc min, Double Stage : 10 arc min. Operating Temperature : -54 to 121 oC (-65 to 250 Deg F).

Related Information:

You might also be interested in the range of Gearheads - Inline - Planetary - Size 17 - Precision on the Miniature Bearings Australia site.


Drylin Bearings and Systems


Drylin - Linear - Slides and Carriages - Size 17
Drylin - Linear - Slides and Carriages - Size 17

Also see combined categories:
All Drylin Slides and Carriages

Linear sliding motion.

Guide Rail Weight: 150 g/m. Carriage Weight: 1.7g. Max Rail Length: 1960 mm. Standard Bore Scheme: Symmetrical C5 = C6. Particularly insensitive to dust, dirt and water.

Related Information:

You might also be interested in the range of Drylin - Linear - Slides and Carriages - Size 17 on the Miniature Bearings Australia site.


Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide
Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:

You might also be interested in the range of Belts - Timing - 14.000mm Pitch - GT2 - 170mm Wide on the Miniature Bearings Australia site.


Belts - Timing - 14.000mm Pitch - HTD - 170mm Wide
Belts - Timing - 14.000mm Pitch - HTD - 170mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

HTD Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:

You might also be interested in the range of Belts - Timing - 14.000mm Pitch - HTD - 170mm Wide on the Miniature Bearings Australia site.


Pulleys - Timing - 14.000mm Pitch - GT2 - 170mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT2 - 170mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.

Related Information:

You might also be interested in the range of Pulleys - Timing - 14.000mm Pitch - GT2 - 170mm Wide - Taperlock on the Miniature Bearings Australia site.


46-243178P2 GE Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

A larger range of 46-243178P2 GE Parts might be available on the Bearing Shop Online site. You might also be interested in the range of 46-243178P2 GE Parts on the Miniature Bearings Australia site.


46-243178P3 GE Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

A larger range of 46-243178P3 GE Parts might be available on the Bearing Shop Online site. You might also be interested in the range of 46-243178P3 GE Parts on the Miniature Bearings Australia site.


5177597 GE Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

A larger range of 5177597 GE Parts might be available on the Bearing Shop Online site. You might also be interested in the range of 5177597 GE Parts on the Miniature Bearings Australia site.


Model Kits - Planes and Helicopters - Military - 1-72nd Scale
Model Kits - Planes and Helicopters - Military - 1-72nd Scale

Also see combined categories:
All Model Kits
All Model Plane and Helicopter Kits

Plastic model kits to build, paint and display. NOT Remote Control.

Brands include Tamiya, Italeri, Academy, Hasegawa.

Related Information:

You might also be interested in the range of Model Kits - Planes and Helicopters - Military - 1-72nd Scale on the Miniature Bearings Australia site.


Pins - Ball Lock - High Tension - Industrial
Pins - Ball Lock - High Tension - Industrial

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel shank. CRES440C stainless steel spindle. Four balls offer greater pullout strength. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - High Tension - Industrial on the Miniature Bearings Australia site.


Pins - Ball Lock - Button Handle - Stainless Steel
Pins - Ball Lock - Button Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - Button Handle - Stainless Steel on the Miniature Bearings Australia site.


Plungers - Spring - Push Fit - Stainless
Plungers - Spring - Push Fit - Stainless

Also see combined categories:
All Push Fit Spring Plungers

300 series stainless with 17-7 stainless spring


You might also be interested in the range of Plungers - Spring - Push Fit - Stainless on the Miniature Bearings Australia site.


Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel
Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel on the Miniature Bearings Australia site.


Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel on the Miniature Bearings Australia site.


Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel
Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel on the Miniature Bearings Australia site.


Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty
Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty

Also see combined categories:
All Ball Lock Pins

17-4 PH or PH15-7MO stainless steel spindle and shank. Ground handling pins used in the handling of aircraft and service equipment. Tee handle. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty on the Miniature Bearings Australia site.


Couplings - Sleeve Type - Hubs
Couplings - Sleeve Type - Hubs


0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

You might also be interested in the range of Couplings - Sleeve Type - Hubs on the Miniature Bearings Australia site.


Couplings - Sleeve Type - Sleeves
Couplings - Sleeve Type - Sleeves


0.05 to 2.1 Nm. Max Speed 1750 rpm.

Polyethylene Sleeve. Acetal hub. Aluminium Alloy Insert.

Related Information:

You might also be interested in the range of Couplings - Sleeve Type - Sleeves on the Miniature Bearings Australia site.


Levers - Clamp
Levers - Clamp

Also see combined categories:
All Levers

Steel Parts: Quality class 5.8. Handle: Diecast zinc to DIN 1743 or Glass fibre reinforced plastic with toothed wheel in diecast zinc. Surface Finish: Handle plastic coated. Steel parts black oxide finish.


Pins - Ball Lock - L-Handle - Industrial - Stainless Steel
Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - L-Handle - Industrial - Stainless Steel on the Miniature Bearings Australia site.


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Also see combined categories:
All Ball Lock Pins

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Tee handle. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium on the Miniature Bearings Australia site.


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless. Tee handle. Also called detent pins.

Positive lock detent pins.

Related Information:

You might also be interested in the range of Pins - Ball Lock - T-Handle - Industrial - Stainless Steel on the Miniature Bearings Australia site.


Springs - Compression - Long Lengths - Music Wire
Springs - Compression - Long Lengths - Music Wire

Also see combined categories:
All Compression Springs

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Related Information:

You might also be interested in the range of Springs - Compression - Long Lengths - Music Wire on the Miniature Bearings Australia site.


Springs - Compression - Long Lengths - Stainless Steel
Springs - Compression - Long Lengths - Stainless Steel

Also see combined categories:
All Compression Springs

1 metre and half metre lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Related Information:

You might also be interested in the range of Springs - Compression - Long Lengths - Stainless Steel on the Miniature Bearings Australia site.


Push On Retaining Rings - Stainless Steel
Push On Retaining Rings - Stainless Steel

Also see combined categories:
All Push On Rings

Rotor Clip TY. Stainless Steel hardness HR15N 82.5-86

PH 15-7/17-7 Stainless Steel and 1.4310 Stainless Steel.

You might also be interested in the range of Push On Retaining Rings - Stainless Steel on the Miniature Bearings Australia site.


Bushes - Plastic - Clip - Bevelled Edge
Bushes - Plastic - Clip - Bevelled Edge

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

M250 Polymer minus 40 Deg C to 80 Deg C (minus 40 Deg F to 176 Deg F). Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight.

Related Information:

A larger range of Bushes - Plastic - Clip - Bevelled Edge might be available on the Bearing Shop Online site. You might also be interested in the range of Bushes - Plastic - Clip - Bevelled Edge on the Miniature Bearings Australia site.


Circlips - Internal - Round Section
Circlips - Internal - Round Section

Also see combined categories:
All Internal Circlips

Includes DIN7993B / RB / M1700 / BN826. Retaining rings. Snap Rings (USA).

Round section wire rings are mostly used in semicircular grooves. Applications include gear systems, automotive engineering and open gudgeon pins.

Related Information:

A larger range of Circlips - Internal - Round Section might be available on the Bearing Shop Online site. You might also be interested in the range of Circlips - Internal - Round Section on the Miniature Bearings Australia site.


Nuts - Wing - Brass
Nuts - Wing - Brass

Also see combined categories:
All Nuts
All Wing Nuts

Brass Wing Nuts - A Pattern B18.17


Related Information:

You might also be interested in the range of Nuts - Wing - Brass on the Miniature Bearings Australia site.


Spiral Rings - Internal - Medium Duty
Spiral Rings - Internal - Medium Duty

Also see combined categories:
All Internal Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.

You might also be interested in the range of Spiral Rings - Internal - Medium Duty on the Miniature Bearings Australia site.


Nuts - Wing - Steel
Nuts - Wing - Steel

Also see combined categories:
All Nuts
All Wing Nuts

Zinc Plated Wing Nuts - A Pattern B18.17


Related Information:

You might also be interested in the range of Nuts - Wing - Steel on the Miniature Bearings Australia site.


Washers - Lock - Split - Titanium CP Grade 1
Washers - Lock - Split - Titanium CP Grade 1

Also see combined categories:
All Split Lock Washers
All Lock Washers

CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Dimensions are nominal and may vary between batches. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance. Washers designed to be used to help prevent nuts from vibrating loose.

You might also be interested in the range of Washers - Lock - Split - Titanium CP Grade 1 on the Miniature Bearings Australia site.


Nuts - Hexagonal - Titanium - CP Grade 1
Nuts - Hexagonal - Titanium - CP Grade 1

Also see combined categories:
All Nuts

Metric Only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

You might also be interested in the range of Nuts - Hexagonal - Titanium - CP Grade 1 on the Miniature Bearings Australia site.


Mounts - Centre Bolt - Solo Unitised
Mounts - Centre Bolt - Solo Unitised

Also see combined categories:
All Centrebolt Mounts

Vibration dampening. Also known as T Bushes or Bonded Mounts.

Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.

Related Information:

You might also be interested in the range of Mounts - Centre Bolt - Solo Unitised on the Miniature Bearings Australia site.


Washers - Flat - Titanium - CP Grade 1
Washers - Flat - Titanium - CP Grade 1

Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic

Flat washers. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Commercially pure for general industrial corrosion applications. UNS R50250. Please note! Tolerances for commercial grade washers are much larger than for precision washers. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

You might also be interested in the range of Washers - Flat - Titanium - CP Grade 1 on the Miniature Bearings Australia site.


Jewellery - Dr Who Pendants
Jewellery - Dr Who Pendants


Dr Who Pendants with tardis, keep calm and don't blink


You might also be interested in the range of Jewellery - Dr Who Pendants on the Miniature Bearings Australia site.


Nuts - Wing - Stainless Steel
Nuts - Wing - Stainless Steel

Also see combined categories:
All Nuts
All Wing Nuts

304 and 316 Stainless Wing Nuts - A Pattern B18.17


Related Information:

You might also be interested in the range of Nuts - Wing - Stainless Steel on the Miniature Bearings Australia site.


Gears - Spur - 12DP - 14.5 Degree - Steel
Gears - Spur -  12DP - 14.5 Degree - Steel

Also see combined categories:
All 12DP Spur Gears

PCD = No. of Teeth x 2.117mm (1/12 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 12 Diametrical Pitch. Approx 6.65mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

You might also be interested in the range of Gears - Spur - 12DP - 14.5 Degree - Steel on the Miniature Bearings Australia site.


Gears - Spur - 8DP - 14.5 Degree - Steel
Gears - Spur -   8DP - 14.5 Degree - Steel

Also see combined categories:
All 8DP Spur Gears

PCD = No. of Teeth x 3.175mm (1/8 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 8 Diametrical Pitch. Approx 9.98mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:

You might also be interested in the range of Gears - Spur - 8DP - 14.5 Degree - Steel on the Miniature Bearings Australia site.


Screws - Cap - Socket - Titanium CP Grade 1 - DIN912
Screws - Cap - Socket - Titanium CP Grade 1 - DIN912

Also see combined categories:
All Machine Screws
All Socket Cap Screws

Metric Sizes to DIN912. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

You might also be interested in the range of Screws - Cap - Socket - Titanium CP Grade 1 - DIN912 on the Miniature Bearings Australia site.


Screws - Countersunk - Titanium CP Grade 1 - Philips Drive
Screws - Countersunk - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Machine Screws

Flat Head Countersunk. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

You might also be interested in the range of Screws - Countersunk - Titanium CP Grade 1 - Philips Drive on the Miniature Bearings Australia site.


Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916
Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN913 grub screws. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

You might also be interested in the range of Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916 on the Miniature Bearings Australia site.


Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.

A larger range of Shafting - Pipe - Aluminium might be available on the Bearing Shop Online site. You might also be interested in the range of Shafting - Pipe - Aluminium on the Miniature Bearings Australia site.


Screws - Hex Head - Titanium CP Grade 1
Screws - Hex Head - Titanium CP Grade 1

Also see combined categories:
All Hex Head Screws

Fully threaded hex head set screws (DIN933). CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Din 933. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

You might also be interested in the range of Screws - Hex Head - Titanium CP Grade 1 on the Miniature Bearings Australia site.


Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:

You might also be interested in the range of Screws - Pan Head - Titanium CP Grade 1 - Philips Drive on the Miniature Bearings Australia site.


Slides - Drawer - Extra Heavy Duty
Slides - Drawer - Extra Heavy Duty

Also see combined categories:
All Drawer Slides

Ideal for computer server stotage, tool boxes, service truck tool drawers and vehicle battery trays. Full extension extra heavy duty slide. 220kg load rating for moderate use, 175kg for frequent use, 130kg for mobile (vehicular) use.

65kg load rating for flat mount applications. Slide space required 19.1mm. Slide includes a silencing bumper for drawer closure. Caution - slide must never be used as a pull-out step, platform or any application supporting human weight.

You might also be interested in the range of Slides - Drawer - Extra Heavy Duty on the Miniature Bearings Australia site.


Shafting - Aluminium
Shafting - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.

A larger range of Shafting - Aluminium might be available on the Bearing Shop Online site. You might also be interested in the range of Shafting - Aluminium on the Miniature Bearings Australia site.


Couplings - Three Jaw Type - Inserts
Couplings - Three Jaw Type - Inserts


Match with Three Jaw Type hubs by OD

Use Bost-Bronz inserts for high torque loads at slower speeds. Use rubber for quiter operation. Use polyurethane for moderate to heavy shock loads.

Related Information:

You might also be interested in the range of Couplings - Three Jaw Type - Inserts on the Miniature Bearings Australia site.


Shafting - Supported - Pre-Drilled - Aluminium
Shafting - Supported - Pre-Drilled - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

For Drylin Bearings.

Material : AlMgSi 0.5 F22. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Spec. Electr. Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and less than 9.

A larger range of Shafting - Supported - Pre-Drilled - Aluminium might be available on the Bearing Shop Online site. You might also be interested in the range of Shafting - Supported - Pre-Drilled - Aluminium on the Miniature Bearings Australia site.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126925 products in 2503 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126925 products in 2503 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.