Small Parts & Bearings - an MBA company

TAPE CATEGORIES


Tape - Fiberglass - PTFE Coated
Tape - Fiberglass - PTFE Coated

Also see combined categories:
All Tape

Heat Sealer Tape

Non stick ptfe tape is resistant to abrasion, high temperature and chemicals. Commonly used on heatsealing machines, mould protection, packaging, automotive and electrical applications. Temperature range minus 73 oC to 260 oC (-100 to 500 Deg F). Less than 5 percent elongation. This category may be available in the new MBA online store at Tape - Fiberglass - PTFE Coated.


Bushings - Taperlock
Bushings - Taperlock


This category may be available in the new MBA online store at Bushings - Taperlock.


Bearings - Tapered Roller - Cone
Bearings - Tapered Roller - Cone


Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.

This category may be available in the new MBA online store at Bearings - Tapered Roller - Cone.


Bearings - Tapered Roller - Cup
Bearings - Tapered Roller - Cup


Replacements for existing tapered roller cups (outer part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.

This category may be available in the new MBA online store at Bearings - Tapered Roller - Cup.


Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel
Pins - Taper - Imperial - Extractable - External Thread - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.

Threaded externally for easy extraction.

Related Information:


Pins - Taper - Imperial - Miniature - Carbon Steel
Pins - Taper - Imperial - Miniature - Carbon Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.

This category may be available in the new MBA online store at Pins - Taper - Imperial - Miniature - Carbon Steel.

Related Information:


Pins - Taper - Imperial - Miniature - Stainless Steel
Pins - Taper - Imperial - Miniature - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.

This category may be available in the new MBA online store at Pins - Taper - Imperial - Miniature - Stainless Steel.

Related Information:


Pins - Taper - Imperial - Standard - Carbon Steel
Pins - Taper - Imperial - Standard - Carbon Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.

This category may be available in the new MBA online store at Pins - Taper - Imperial - Standard - Carbon Steel.

Related Information:


Pins - Taper - Imperial - Standard - Stainless Steel
Pins - Taper - Imperial - Standard - Stainless Steel

Also see combined categories:
All Imperial Taper Pins

Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.

This category may be available in the new MBA online store at Pins - Taper - Imperial - Standard - Stainless Steel.

Related Information:


Pins - Taper - Metric - Carbon Steel
Pins - Taper - Metric - Carbon Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50. DIN 1 - A - Ground Ra 0.8um

Metric Sizes to DIN 1. This category may be available in the new MBA online store at Pins - Taper - Metric - Carbon Steel.

Related Information:


Pins - Taper - Metric - Extractable - External Thread
Pins - Taper - Metric - Extractable - External Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded externally for easy extraction.

DIN 7977. This category may be available in the new MBA online store at Pins - Taper - Metric - Extractable - External Thread.

Related Information:


Pins - Taper - Metric - Extractable - Internal Thread
Pins - Taper - Metric - Extractable - Internal Thread

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50 and threaded internally for easy extraction.

DIN 7978. This category may be available in the new MBA online store at Pins - Taper - Metric - Extractable - Internal Thread.

Related Information:


Pins - Taper - Metric - Stainless Steel
Pins - Taper - Metric - Stainless Steel

Also see combined categories:
All Metric Taper Pins

Metric Sizes Tapered 1:50. DIN 1 - A - Ground Ra 0.8um

Metric Sizes to DIN 1. This category may be available in the new MBA online store at Pins - Taper - Metric - Stainless Steel.

Related Information:


Inserts - Tapered Fit - Finserts - For Wood and Plastics
Inserts - Tapered Fit - Finserts - For Wood and Plastics


Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening is ensured.

The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness. Finserts prevent splintering, splitting and thread pullout. This category may be available in the new MBA online store at Inserts - Tapered Fit - Finserts - For Wood and Plastics.


Bushings - Integral Taper
Bushings - Integral Taper

Also see combined categories:
All Locking Assemblies
All Locking Bushings

Stainless Steel Taper Bushings.

Will not mar shafts. This category may be available in the new MBA online store at Bushings - Integral Taper.


Knobs - Oval Tapered - Press On - Phenolic
Knobs - Oval Tapered - Press On - Phenolic

Also see combined categories:
All Knobs

Press on knobs hold on securely without threads or set screws

Shaft diameter should be +0.000 / - 0.076 mm for best performance. Knob is held in place by a ribbed insert that squeezes onto the shaft. Eliminates machining costs. Knobs will not come off with normal use but can be removed by knocking with a hammer on the underside. This category may be available in the new MBA online store at Knobs - Oval Tapered - Press On - Phenolic.

Related Information:


Bushings - QD
Bushings - QD


Used with QD type cast iron vee pulleys, timing pulleys, sprockets, poly vee pulleys and other parts designed specifically for use with a QD bushing

Similar to a taperlock bush, but not interchangeable. QD bushings like taperlock bushings allow for use of a single stock pulley for many applications with different shaft sizes. Select the correct QD series to suit the pulley. This category may be available in the new MBA online store at Bushings - QD.

Related Information:


Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts
Check Size Before Ordering Giant Tapered OD2 Road Overdrive2 Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Bungs and Caps - Reversible - Round
Bungs and Caps - Reversible - Round


Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.

Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges. This category may be available in the new MBA online store at Bungs and Caps - Reversible - Round.

Related Information:


Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock

Also see combined categories:
All Sprockets for Roller Chain

Match with 12.70x7.75mm simplex chain (08B BS)

Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch. This category may be available in the new MBA online store at Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock.

Related Information:


Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 170mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  40mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 40mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  55mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 55mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT -  85mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 14.000mm Pitch - GT - 85mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock
Pulleys - Timing -  5.000mm Pitch - GT - 15mm Wide - Taperlock

Also see combined categories:
All 5mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 15mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock
Pulleys - Timing -  5.000mm Pitch - GT - 25mm Wide - Taperlock

Also see combined categories:
All 5mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size. This category may be available in the new MBA online store at Pulleys - Timing - 5.000mm Pitch - GT - 25mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 12mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 12mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 8.000mm Pitch - GT - 20mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 20mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 20mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 8.000mm Pitch - GT - 30mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 30mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 30mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 50mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 50mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 8.000mm Pitch - GT - 85mm Wide - Taperlock
Pulleys - Timing -  8.000mm Pitch - GT - 85mm Wide  - Taperlock

Also see combined categories:
All 8mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide. Use with GT2 or GT3 type belts.

Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 8.000mm Pitch - GT - 85mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Taperlock bush required for bore.

Cast Iron and Steel. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 38.1mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 50.8mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock
Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock

Also see combined categories:
All H 12.7mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 76.2mm. Taperlock bush required for bore.

Steel and Cast Iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  12.7mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  19.1mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Taperlock.

Related Information:


Pulleys - Timing - 9.525mm Pitch - L - 25.4mm Wide - Taperlock
Pulleys - Timing -  9.525mm Pitch - L -  25.4mm Wide - Taperlock

Also see combined categories:
All L 9.525mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.

Match with a taperlock to suit your bore requirements. This category may be available in the new MBA online store at Pulleys - Timing - 9.525mm Pitch - L - 25.4mm Wide - Taperlock.

Related Information:


Assortment Kits - Various
Assortment Kits - Various


Clevis Pins - Keysteel - Rivet Nuts - Rivets - Shim - Screws - U Cushions - Taper Pins - Tubing - Washers

This category may be available in the new MBA online store at Assortment Kits - Various.


Tools - Taps - High Speed Steel - Hand - Sets
Tools - Taps - High Speed Steel - Hand - Sets

Also see combined categories:
All Taps
All Tools

Metric and Imperial High Speed Steel tap sets including taper, intermediate and bottoming tap in each set

High Speed Steel (HSS) Short Machine taps. Older stock is Triangle Brand (UK). Newer stock is Volkel Brand (German). This category may be available in the new MBA online store at Tools - Taps - High Speed Steel - Hand - Sets.


Pins - Groove
Pins - Groove

Also see combined categories:
All Groove Pins

Non threaded press fit fastener that doesn't require a reamed hole as do dowel pins.Commonly used in place of taper pins.

An economic method of fastening without the need for precision drilled and reamed holes. Recommended hole tolerance is H11. Total length may be slightly longer than the nominal length. Expanded portion of the pin is compressed into the hole a few thousands of an inch wider than the nominal pin diameter. Radial forces lock the pin securely into the drilled hole. This category may be available in the new MBA online store at Pins - Groove.

Related Information:


Sleeving - Mesh
Sleeving - Mesh


Low cost protection for threaded and cylindrical parts

Elastic snug tight fit protective sleeve fits over straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).


Keys - Gib Head - Steel
Keys - Gib Head - Steel

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100). This category may be available in the new MBA online store at Keys - Gib Head - Steel.

Related Information:


Keys - Gib Head - Zinc Plated
Keys - Gib Head - Zinc Plated

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100). This category may be available in the new MBA online store at Keys - Gib Head - Zinc Plated.

Related Information:





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138704 products in 2019 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138704 products in 2019 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.