Supports Pedestal Two Bolt Categories
Shafting Precision Ground
Supports - Pedestal Two Bolt
For linear shafting.
Cast Aluminium or Malleable Iron. Clamping Screw (supplied) made of Steel. This category may be available in the new MBA online store at Supports - Pedestal Two Bolt.
Related Information:
Housings - Pedestal - Miniature - Self Aligning
Spyraflo pressed steel housings incorporating Abec 3 bearings in a special seat allowing for +/- 5 Deg Misalignment. Improves performance and reduces manufacturing costs. Simplify designs.
Small and cost effective. All bore sizes are mounted in the same size housing for ease of design and cost efficiency. High precision bearings pre-mounted with a 5o misalignment capability. 40,000 RPM recommended maximum speed with testing. 27kgf radial static capacity, 54kgf radial dynamic capacity per bearing. RoHS, REACH and SVHC environmental compliant.
Rail Supports - Without Shaft
For mounting of linear shafting.
Shafting sold separately. Support is made from aluminium. This category may be available in the new MBA online store at Rail Supports - Without Shaft.
Related Information:
Rail Supports - With Shaft - One Piece
One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.
Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments. This category may be available in the new MBA online store at Rail Supports - With Shaft - One Piece.
Related Information:
Rail Supports - With Shaft - Standard
Includes linear shafting.
Includes shaft to h6 tolerances. Support is made from aluminium. This category may be available in the new MBA online store at Rail Supports - With Shaft - Standard.
Related Information:
Plungers - Indexing Precision - With Support - Ball Grip
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
This category may be available in the new MBA online store at Plungers - Indexing Precision - With Support - Ball Grip.
Plungers - Indexing Precision - With Support - Locking - Ball Grip
Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.
Adjusters - Rigid
Adjustable supports for all kinds of machinery.
Mild steel bright zinc plated. Screwdriver cross recess in base. Use as mounting feet. This category may be available in the new MBA online store at Adjusters - Rigid.
Related Information:
Adjusters - Tilt
Adjustable supports for all kinds of machinery. Mounting feet levelers.
Stem: Mild steel bright zinc plated. Base: Polythene or Polypropylene. Angle of Tilt: 25o from perpendicular. Hexagon Nut: 12mm A/F. Standard colour: Black.
Related Information:
Mounts - Rectangular - 4 Bolt
Rectangular elastomer component bonded with two steel plates.
Low installation height provides good stability. Effectively isolates against horizontal and vertical vibrations. High deflection capacity in horiziontal direction whilst deflection is low in vertical. Oil and grease resistant. Meets OSHA anchoring standards. Ideal use in presses, blowers, pumps, vibrators, rolling mills, crushers etc.
Related Information:
Slides - Linear - Cross Roller Rail
Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.
Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds. This category may be available in the new MBA online store at Slides - Linear - Cross Roller Rail.
Bushings - Drill - Liner Type - Headless - Hardened Steel
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Liner Type - Headless - Hardened Steel.
Bushings - Drill - Press Fit - Headless - Hardened Steel
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Press Fit - Headless - Hardened Steel.
Bushings - Drill - Press Fit - Headless - Tungsten Carbide
Designed to guide, position, and support the cutting tool in a metalworking jig.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 67-69. This category may be available in the new MBA online store at Bushings - Drill - Press Fit - Headless - Tungsten Carbide.
Bushings - Drill - Slip - With Head - Hardened Steel
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Used with fixed or slip renewable bushings. Permanently pressed into the jig plate creating a precise location point. Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Slip - With Head - Hardened Steel.
Shafting - Pre Drilled and Tapped - Stainless Steel
For use with rail supports and open linear bearings
This category may be available in the new MBA online store at Shafting - Pre Drilled and Tapped - Stainless Steel.
Bushings - Drill - Press Fit - Standard Head - Hardened Steel
Designed to guide, position, and support the cutting tool in a metalworking jig. Hardened steel.
Hardness: RC 62-64. This category may be available in the new MBA online store at Bushings - Drill - Press Fit - Standard Head - Hardened Steel.
Rollers - Durasoft - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. This category may be available in the new MBA online store at Rollers - Durasoft - Shaft Mount - Black Neoprene.
Rollers - Durasoft - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Shaft Mount - Coloured Urethane.
Rollers - Durasoft - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. This category may be available in the new MBA online store at Rollers - Durasoft - Stud Mount - Black Neoprene.
Rollers - Durasoft - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Stud Mount - Coloured Urethane.
Rollers - Solid - Shaft Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. This category may be available in the new MBA online store at Rollers - Solid - Shaft Mount - Black Neoprene.
Rollers - Solid - Shaft Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Solid - Shaft Mount - Coloured Urethane.
Rollers - Solid - Stud Mount - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at Rollers - Solid - Stud Mount - Black Neoprene.
Rollers - Solid - Stud Mount - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at Rollers - Solid - Stud Mount - Coloured Urethane.
Rollers - Durasoft - Shaft Mount - With Ball Bearing
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Shaft Mount - With Ball Bearing.
Rollers - Solid - Bonded to Steel Insert - Black Neoprene
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. This category may be available in the new MBA online store at Rollers - Solid - Bonded to Steel Insert - Black Neoprene.
Rollers - Solid - Bonded to Steel Insert - Coloured Urethane
Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.
Designed for use in machines and assembly operations where part movement and protection is needed. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Solid - Bonded to Steel Insert - Coloured Urethane.
Linear Slides - Cross Roller Tables - Aluminium
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Cross Roller Tables - Aluminium.
Linear Slides - Cross Roller Tables - Steel
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Cross Roller Tables - Steel.
Linear Slides - Low Profile - Crossed Roller Table - Aluminium
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Low Profile - Crossed Roller Table - Aluminium.
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.
Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.
Bearings - 4 Point Contact
4 Point Contact Bearings support Axial Loads in both directions. Can replace double row angular contact bearings where space is limited. This category may be available in the new MBA online store at Bearings - 4 Point Contact.
Related Information:
Linear Guide System - Two Piece
Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.
Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems. This category may be available in the new MBA online store at Linear Guide System - Two Piece.
Cross Blocks - Heavy Duty - One Knob One Nut
Used for connecting two round rods at 90o.
Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods. This category may be available in the new MBA online store at Cross Blocks - Heavy Duty - One Knob One Nut.
Mounts - Levelling Studded - 303 Stainless - Standard
Levelling adjusters. Good quality with value pricing. 303 stainless steel.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces. This category may be available in the new MBA online store at Mounts - Levelling Studded - 303 Stainless - Standard.
Screws - Roof Bolt - Steel
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts. This category may be available in the new MBA online store at Screws - Roof Bolt - Steel.
Related Information:
Cable Attachments - Thimbles - Stainless Steel
316 Stainless Steel. Use with synchromesh cable or standard miniature cable. Use with synchromesh or standard miniature cable
Thimbles provide loop support at higher loads and protect cables from wear when motion is present. Some thimbles may have open or uneven ends. This category may be available in the new MBA online store at Cable Attachments - Thimbles - Stainless Steel.
Related Information:
Pins - Dowel Bushings
Series DB100 Spirol
Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12. This category may be available in the new MBA online store at Pins - Dowel Bushings.
Related Information:
Bolts - Eye Bent - Stainless Steel
Not recommended for lifting. 304 stainless steel.
Complete with nut. Rolled threads. This category may be available in the new MBA online store at Bolts - Eye Bent - Stainless Steel.
Bolts - Eye Bent - Steel
Not recommended for lifting.
Carbon steel zinc plated. Complete with nut. Rolled threads. This category may be available in the new MBA online store at Bolts - Eye Bent - Steel.
Bolts - Eye Blank Shank - Carbon Steel
Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications. This category may be available in the new MBA online store at Bolts - Eye Blank Shank - Carbon Steel.
Bolts - Eye Full Threaded Shank - Plain - Stainless Steel
304 Stainless Steel
Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications. This category may be available in the new MBA online store at Bolts - Eye Full Threaded Shank - Plain - Stainless Steel.
Bolts - Eye Full Threaded Shanks - Shouldered - Carbon Steel - Standard
Forged self coloured carbon steel.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Bolts - Eye Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Forged zinc plated carbon steel.
Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Bolts - Eye Full Thread Shank - Carbon Steel
Forged self coloured carbon steel.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications. This category may be available in the new MBA online store at Bolts - Eye Full Thread Shank - Carbon Steel.
Bolts - Eye Partial Threaded Shanks - Plain - Carbon Steel
Hot galvanised finished steel with machine thread.
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads. This category may be available in the new MBA online store at Bolts - Eye Partial Threaded Shanks - Plain - Carbon Steel.
Bolts - Eye Partial Threaded Shanks - Plain - Stainless Steel
316 Stainless Steel
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads. This category may be available in the new MBA online store at Bolts - Eye Partial Threaded Shanks - Plain - Stainless Steel.
Bolts - Eye Partial Threaded Shanks - Shouldered - Carbon Steel
Hot galvanised finished steel with machine thread.
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads. This category may be available in the new MBA online store at Bolts - Eye Partial Threaded Shanks - Shouldered - Carbon Steel.
Bolts - Eye Partial Threaded Shanks - Shoulder - Stainless Steel
316 Stainless Steel
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads. This category may be available in the new MBA online store at Bolts - Eye Partial Threaded Shanks - Shoulder - Stainless Steel.
Main Pages
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 153564 products in 2094 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
