Small Parts & Bearings - an MBA company

Suction Cups Categories


Suction Cups
Suction Cups


EPDM or Natural Rubber as listed against each item

EPDM is a higher grade rubber that rates excellent for ozone resistance and is used for molded parts used outdoors. SBR is Styrene-butadiene Rubber is a general purpose rubber but not recommended for continual use outdoors or in oily environments.


Mounts - Vibration - Isolation Pads - General Purpose
Mounts - Vibration - Isolation Pads - General Purpose

Also see combined categories:
All Isolation Pad Mounts

For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.

Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.


Mounts - Leveling - Machine - Cushioned
Mounts - Leveling - Machine - Cushioned

Also see combined categories:
All Mounting Feet

Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.

High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.


Washers - Cup - Aluminium
Washers - Cup - Aluminium

Also see combined categories:
All Cup Washers

For countersunk screws.

Aluminium solid cup washers.


Washers - Cup - Brass - Nickel Plated
Washers - Cup - Brass - Nickel Plated

Also see combined categories:
All Cup Washers

For countersunk screws.



Washers - Cup - Nylon
Washers - Cup - Nylon

Also see combined categories:
All Cup Washers

Countersunk washers for use with screws for decorative finishing



Washers - Cup - Stainless Steel
Washers - Cup - Stainless Steel

Also see combined categories:
All Cup Washers

For countersunk screws.

Stainless Steel cup washers.


Washers - Cup - Steel - Nickel Plated
Washers - Cup - Steel - Nickel Plated

Also see combined categories:
All Cup Washers

Countersunk washers for use with screws for decorative finishing



Magnets - Cup Assemblies - Clips
Magnets - Cup Assemblies - Clips

Also see combined categories:
All Magnets
All Cup Magnets



Magnets - Cup Assemblies - Loop
Magnets - Cup Assemblies - Loop

Also see combined categories:
All Magnets
All Cup Magnets

Ideal for hanging signs and lights, retrieving steel items from tanks, vats, bins etc.

Plated cup with a 9.525mm ID loop.


Magnets - Cup Assemblies - Stud
Magnets - Cup Assemblies - Stud

Also see combined categories:
All Magnets
All Cup Magnets



Magnets - Cup Assemblies - Through Hole
Magnets - Cup Assemblies - Through Hole

Also see combined categories:
All Magnets
All Cup Magnets



Screws - Set - Cup Point - Square Head
Screws - Set - Cup Point - Square Head


Grade 8 hreat treated alloy steel. All screws are threaded to the head.



Hooks - Ball - Cup - 304 Stainless
Hooks - Ball - Cup - 304 Stainless


Polished finish. Threaded end for quick installation. Light and strong. Ideal in corrosive environments.



Bearings - Tapered Roller - Cup
Bearings - Tapered Roller - Cup


Replacements for existing tapered roller cups (outer part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.



Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 304 Stainless Steel - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:


Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916
Socket Set Screws - Cup Point - Standard - 316 Stainless Steel - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:


Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916
Socket Set Screws - Cup Point - Standard - Alloy Steel - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:


Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916
Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916

Also see combined categories:
All Cup Point Standard Grub Screws
All Grub Screws

Standard grub screws. UNC - UNF - BA - METRIC.


Related Information:


Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916
Socket Set Screws - Cup Point - Titanium - CP Grade 1 - DIN916

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN913 grub screws. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:


Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916
Socket Set Screws - Cup Point - Titanium - Ti-Gr5 - Ti-6Al4v - DIN916

Also see combined categories:
All Non Magnetic Grub Screws
All Grub Screws

Standard DIN916 grub screws with cup point. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Used in critical aircraft structural components. UNS R56400. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Related Information:


Hooks - Ball - Half Cup - 304 Stainless
Hooks - Ball - Half Cup - 304 Stainless


Polished finish. Threaded end for quick installation. Light and strong. Ideal in corrosive environments.



Mounts - Vibration - Isolation - Cup Style 2
Mounts - Vibration - Isolation - Cup Style 2

Also see combined categories:
All Cup Mounts

Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.

High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils.


Mounts - Cupmounts - Industrial
Mounts - Cupmounts - Industrial

Also see combined categories:
All Cup Mounts

Protext against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz.

Can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.


Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Also see combined categories:
All Press In Bearings

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.

Related Information:


Collars - Shaft - Standard - Steel
Collars - Shaft - Standard - Steel

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. Carbon steel.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:


Collars - Shaft - Standard - Nylon
Collars - Shaft - Standard - Nylon

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Standard one piece nylon shaft collar with set screw

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:


Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:


Bearings - Tapered Roller - Cone
Bearings - Tapered Roller - Cone


Replacements for existing tapered roller cones (inner part). Match with part number on your existing bearing. It is recommended that you change both cup and cone whenever possible.



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 125482 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 125482 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.