Small Parts & Bearings - an MBA company

STUDS CATEGORIES


Studs - Shoulder - Machine
Studs - Shoulder - Machine


Machine shoulder studs can be used with idlers or tensioner arms

This category may be available in the new MBA online store at Studs - Shoulder - Machine.


Studs - Threaded - Driver
Studs - Threaded - Driver


Medium carbon steel with black oxide finish. 125,000 PSI minimum tensile strength. With wrench flats in the centre.

This category may be available in the new MBA online store at Studs - Threaded - Driver.


Studs - Threaded - Standard
Studs - Threaded - Standard


Metric and imperial sizes. Steel and 303 stainless steel.

Yield strength 100,000 PSI. Tensile strength 125,000 PSI. This category may be available in the new MBA online store at Studs - Threaded - Standard.


You may also be interested in

Castors Stud


Castors - Stud - Threaded - General Purpose - Swivel
Castors - Stud - Threaded - General Purpose - Swivel

Also see combined categories:
All Stud Type Castors

This category may be available in the new MBA online store at Castors - Stud - Threaded - General Purpose - Swivel.


Castors - Stud - Twin Wheel - Light Medium Duty
Castors - Stud - Twin Wheel - Light Medium Duty

Also see combined categories:
All Stud Type Castors

This category may be available in the new MBA online store at Castors - Stud - Twin Wheel - Light Medium Duty.


Castors - Bolt - Utility
Castors - Bolt - Utility


Swivel Castors for light duty applications including wire baskets, display equipment and light trolley applications.

This category may be available in the new MBA online store at Castors - Bolt - Utility.


Studs - Full Thread - Stainless Steel
Studs - Full Thread - Stainless Steel

Also see combined categories:
All Studs

18-8 Stainless Steel Allthread Threaded Bar

Short lengths of threaded 18-8 stainless steel bar. This category may be available in the new MBA online store at Studs - Full Thread - Stainless Steel.


Studs - Full Thread - Steel
Studs - Full Thread - Steel

Also see combined categories:
All Studs

Low carbon steel allthread threaded bar

Short lengths of threaded low carbon steel bar. This category may be available in the new MBA online store at Studs - Full Thread - Steel.


Rollers - Durasoft - Stud Mount - Black Neoprene
Rollers - Durasoft - Stud Mount - Black Neoprene

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. This category may be available in the new MBA online store at Rollers - Durasoft - Stud Mount - Black Neoprene.


Rollers - Durasoft - Stud Mount - Coloured Urethane
Rollers - Durasoft - Stud Mount - Coloured Urethane

Also see combined categories:
All Stud Mount Durasoft Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Durasoft rollers have a gentle but firm touch. Unique shape of holes adds to their soft but resilient nature. Blue colour may turn a shade of green when exposed to UV lighting. This category may be available in the new MBA online store at Rollers - Durasoft - Stud Mount - Coloured Urethane.


Rollers - Solid - Stud Mount - Black Neoprene
Rollers - Solid - Stud Mount - Black Neoprene

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at Rollers - Solid - Stud Mount - Black Neoprene.


Rollers - Solid - Stud Mount - Coloured Urethane
Rollers - Solid - Stud Mount - Coloured Urethane

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings. This category may be available in the new MBA online store at Rollers - Solid - Stud Mount - Coloured Urethane.


Handles - Adjustable - Stud
Handles - Adjustable - Stud


Adjustable Handles with Stud

Either Black Plastic with fibreglass reinforcing or Powdered Coated Zinc Novo-Grip Adjustable handles with steel stud. These handles act as a standard clamping lever, yet can be adjusted to 16-26 positions depending on size. Pulling up on handle disengages, while the stud remains stationary. Allowing you to adjust the handle to the desired position. Releasing the handle reengages it for tightening and loosening. Allows for convenient positioning for Maxium leverage as well as saving space. This category may be available in the new MBA online store at Handles - Adjustable - Stud.


Cam Followers - Flanged Stud Type
Cam Followers - Flanged Stud Type

Also see combined categories:
All Cam Followers

This category may be available in the new MBA online store at Cam Followers - Flanged Stud Type.


Cam Followers - Plain Stud Type
Cam Followers - Plain Stud Type

Also see combined categories:
All Cam Followers

This category may be available in the new MBA online store at Cam Followers - Plain Stud Type.


Magnets - Cup Assemblies - Stud
Magnets - Cup Assemblies - Stud

Also see combined categories:
All Magnets
All Cup Magnets

This category may be available in the new MBA online store at Magnets - Cup Assemblies - Stud.


Cam Followers - V-Groove Stud Type
Cam Followers - V-Groove Stud Type

Also see combined categories:
All Cam Followers

This category may be available in the new MBA online store at Cam Followers - V-Groove Stud Type.


Mounts - Pivotal Levelers - With Stud
Mounts - Pivotal Levelers - With Stud

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.

The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. Includes stud epoxied into the base mount. This category may be available in the new MBA online store at Mounts - Pivotal Levelers - With Stud.

Related Information:


Mounts - Pivotal Levelers - Base Without Stud
Mounts - Pivotal Levelers - Base Without Stud

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Tough bonded neoprene. Patented pivotal leveler keeps equipment level and dampens an average 85% of noise. Adjusters.

The mounting nut which holds the stud is molded into the pad in a steel bracket and rotates freely permitting at least 6.35mm of leveling. No stud included so you can use your own custom stud. This category may be available in the new MBA online store at Mounts - Pivotal Levelers - Base Without Stud.

Related Information:


Feet - Mounting - Bonded Neoprene - No Stud
Feet - Mounting - Bonded Neoprene - No Stud

Also see combined categories:
All Mounting Feet

Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.

This category may be available in the new MBA online store at Feet - Mounting - Bonded Neoprene - No Stud.


Feet - Mounting - Bonded Neoprene - With Stud
Feet - Mounting - Bonded Neoprene - With Stud

Also see combined categories:
All Mounting Feet

Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.

This category may be available in the new MBA online store at Feet - Mounting - Bonded Neoprene - With Stud.


Cam Followers - Roller Type - Stainless Steel
Cam Followers - Roller Type - Stainless Steel

Also see combined categories:
All Cam Followers

Stainless steel roller type cam followers.

Stainless Steel similar to 440C. Seals: Synthetic rubber seals. Shields: Stainless Steel shields. Screwdriver slot for mounting. Stud designed to fit H7 housing.

Related Information:


Mounts - Leveling - Socket - Acme Thread - Gold Chromate
Mounts - Leveling - Socket - Acme Thread - Gold Chromate

Also see combined categories:
All Female Socket Levelers

Levelling adjusters. Use acme thread to make a custom stud.

This category may be available in the new MBA online store at Mounts - Leveling - Socket - Acme Thread - Gold Chromate.


Tools - Screw Extractors
Tools - Screw Extractors

Also see combined categories:
All Tools

The quick and easy way to remove broken screws, bolts, pipes and studs.

Note! You will also need a drill bit of the correct size for each extractor. This category may be available in the new MBA online store at Tools - Screw Extractors.


Shims - Slotted - Imperial Sizes
Shims - Slotted - Imperial Sizes

Also see combined categories:
All Slotted Shim

Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.

This category may be available in the new MBA online store at Shims - Slotted - Imperial Sizes.


Mounts - Buffer - Special Purpose
Mounts - Buffer - Special Purpose

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F). This category may be available in the new MBA online store at Mounts - Buffer - Special Purpose.

Related Information:


Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:


Tools - Pullers - Dowel Remover and Setter
Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set. This category may be available in the new MBA online store at Tools - Pullers - Dowel Remover and Setter.

Related Information:


Rod Ends - Steel - Studded - Nylon Seat - Female
Rod Ends - Steel - Studded - Nylon Seat - Female

Also see combined categories:
All Female Rod Ends with Stud

Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated. This category may be available in the new MBA online store at Rod Ends - Steel - Studded - Nylon Seat - Female.


Knobs - Ball - Novo-Grip - Male
Knobs - Ball - Novo-Grip - Male


Ergonomic Shape for easy gripping

Unique styling for a very distinctive look. Belt fluting for non-slip gripping. Black thermoplastic with steel or stainless steel studs. This category may be available in the new MBA online store at Knobs - Ball - Novo-Grip - Male.

Related Information:


Cam Followers - Roller Type - Standard
Cam Followers - Roller Type - Standard

Also see combined categories:
All Cam Followers

Carbon steel roller type cam followers.

Load 1 applies when outer race is mounted into a housing with standard bearing fit. Load 2 applies when used as a track roller. Stud designed to fit H7 housing. This category may be available in the new MBA online store at Cam Followers - Roller Type - Standard.

Related Information:


Knobs - Round - Male - Soft
Knobs - Round - Male - Soft

Also see combined categories:
All Round Knobs
All Knobs

Special high impact strength black technopolymer coated with soft touch elastomer chemically bonded (hardness 70 Shore A). Black matte finish. Resistant to solvents, oils, greases and other chemical agents. Zinc plated threaded steel stud. This category may be available in the new MBA online store at Knobs - Round - Male - Soft.

Related Information:


Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:


Dampers - Double Studded - Silicone
Dampers - Double Studded - Silicone


Damps low frequency vibrations. Vibration dampening

Use for compression only. This category may be available in the new MBA online store at Dampers - Double Studded - Silicone.


Mounts - Leveling - Studded - 303 Stainless
Mounts - Leveling - Studded - 303 Stainless

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Good quality with value pricing. 303 stainless steel.

Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces. This category may be available in the new MBA online store at Mounts - Leveling - Studded - 303 Stainless.


Mounts - Leveling - Studded - 303 Stainless - Industrial - Nylon Padded
Mounts - Leveling - Studded - 303 Stainless - Industrial - Nylon Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.

303 Stainless Steel. Nylon pad for glide applications.


Mounts - Leveling - Studded - 303 Stainless - Industrial - Rubber Padded
Mounts - Leveling - Studded - 303 Stainless - Industrial - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery.

303 Stainless Steel. Elastomer pad for non skid applications.


Mounts - Leveling - Studded - 303 Stainless - Swivel
Mounts - Leveling - Studded - 303 Stainless - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

This category may be available in the new MBA online store at Mounts - Leveling - Studded - 303 Stainless - Swivel.


Mounts - Leveling - Studded - 303 Stainless - Swivel - Acetal Base
Mounts - Leveling - Studded - 303 Stainless - Swivel - Acetal Base

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

This category may be available in the new MBA online store at Mounts - Leveling - Studded - 303 Stainless - Swivel - Acetal Base.


Mounts - Leveling - Studded - 303 Stainless - Swivel - Rubber Padded
Mounts - Leveling - Studded - 303 Stainless - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - 316 Stainless - Swivel
Mounts - Leveling - Studded - 316 Stainless - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

This category may be available in the new MBA online store at Mounts - Leveling - Studded - 316 Stainless - Swivel.


Mounts - Leveling - Studded - 316 Stainless - Swivel - Rubber Padded
Mounts - Leveling - Studded - 316 Stainless - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Acme Thread - Gold Chromate
Mounts - Leveling - Studded - Acme Thread - Gold Chromate

Also see combined categories:
All Male Stud Levelers

Levelling adjusters.

This category may be available in the new MBA online store at Mounts - Leveling - Studded - Acme Thread - Gold Chromate.


Mounts - Leveling - Studded - Anti-Vibration
Mounts - Leveling - Studded - Anti-Vibration

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery.

15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish. This category may be available in the new MBA online store at Mounts - Leveling - Studded - Anti-Vibration.


Mounts - Leveling - Studded - Black Chromate
Mounts - Leveling - Studded - Black Chromate

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. For levelling machine tools, electronic racks, benches etc on uneven surfaces.

Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball. This category may be available in the new MBA online store at Mounts - Leveling - Studded - Black Chromate.


Mounts - Leveling - Studded - Black Chromate - Swivel
Mounts - Leveling - Studded - Black Chromate - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

This category may be available in the new MBA online store at Mounts - Leveling - Studded - Black Chromate - Swivel.


Mounts - Leveling - Studded - Black Chromate - Swivel - Rubber Padded
Mounts - Leveling - Studded - Black Chromate - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Clear Chromate - Swivel
Mounts - Leveling - Studded - Clear Chromate - Swivel

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.

This category may be available in the new MBA online store at Mounts - Leveling - Studded - Clear Chromate - Swivel.


Mounts - Leveling - Studded - Clear Chromate - Swivel - Rubber Padded
Mounts - Leveling - Studded - Clear Chromate - Swivel - Rubber Padded

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. 15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches.



Mounts - Leveling - Studded - Elastomer Base - OSHA Yellow
Mounts - Leveling - Studded - Elastomer Base - OSHA Yellow

Also see combined categories:
All Male Stud Levelers

Levelling adjusters. Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration.

Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load. OSHA Yellow Steel Cover over elastomer base.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Miscellaneous Brands Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF Screws PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 138615 products in 2015 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.