Small Parts & Bearings - an MBA company

ST11 REID


Cross Referenced Part Numbers



PLST-254C-611-C-138 Reid part number ST-11





Thread Size (A): 1-8 UNC (25.4mm). Initial Pressure (F1): 17.79. Final Pressure (F2): 137.89.

Online Price: 0.00     
Stock: Pre-Order (due 3 weeks)     
Due dates are estimates only     


Category Matches

Leadscrews


Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:


Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:


You may also be interested in

Latches Other


Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip


Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately.


Chain and Sprockets Roller


Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch.

Related Information:


Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Match with 19.05x11.68mm simplex steel chain (12B-1 BS)

Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch.

Related Information:


RC Car and Buggy Wheels


Rims - Hobby - Monster Truck 1-10 - Plastic
Rims - Hobby - Monster Truck 1-10 - Plastic

Also see combined categories:
All Rims

Rims for RC wheels



Tyres - Hobby - Car 1-10 - Monster Truck
Tyres - Hobby - Car 1-10 - Monster Truck

Also see combined categories:
All Tyres



Belts Timing HTD -14mm


Belts - Timing - 14.000mm Pitch - HTD - 115mm Wide
Belts - Timing - 14.000mm Pitch - HTD - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

HTD Series Metric Timing Belts

Pitch (P) - 14.000mm. Breaking strength is not indicative of working strength.

Related Information:


RC Car and Buggy Wheels


Rims - Hobby - Car 1-10 - Off Road - Front - Plastic
Rims - Hobby - Car 1-10 - Off Road - Front - Plastic

Also see combined categories:
All Rims

Rims for RC wheels



Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic
Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic

Also see combined categories:
All Rims

Rims for RC wheels



Rims - Hobby - Car 1-10 - Road and Drift - Plastic
Rims - Hobby - Car 1-10 - Road and Drift - Plastic

Also see combined categories:
All Rims

Rims for RC wheels



Belts Timing GT2 -14mm


Belts - Timing - 14.000mm Pitch - GT - 115mm Wide
Belts - Timing - 14.000mm Pitch - GT - 115mm Wide

Also see combined categories:
All 14mm Pitch Timing Belts

GT2 and GT3 Series Metric Timing Belts

Pitch (P) - 14.000mm. GT3 replaces GT2 as GT2 stock is depleted. Breaking strength is not indicative of working strength.

Related Information:


Gearboxes Cross Axis


Gearboxes - Cross Axis - 110 x 95 x 38mm
Gearboxes - Cross Axis - 110 x  95 x  38mm

Also see combined categories:
All Cross Axis Gearboxes

Worm and Wormwheel box. 10.3 to 40.0Nm. 5:1 to 120:1 ratios. P45 and PF45 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Worm: High Carbon Steel 817M40 (40CrNiMo6). Wheel: Quality Aluminium Bronze (CA104 / AB2). Threaded Bearing Caps: Mild Steel, chemically blackened (Blackodised). Fasteners: Steel (non-plated). Bearings : Steel.

Related Information:


Gearmotors Permanent Magnet


Gearmotors - DC PM - Size 70x114
Gearmotors - DC PM - Size 70x114

Also see combined categories:
All DC Permanent Magnet Gearmotors

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.


Tyres - Hobby - Car 1-10 - Drift
Tyres - Hobby - Car 1-10 - Drift

Also see combined categories:
All Tyres



Tyres - Hobby - Car 1-10 - On Road
Tyres - Hobby - Car 1-10 - On Road

Also see combined categories:
All Tyres



Wheels - Hobby - Car 1-10 - Drift
Wheels - Hobby - Car 1-10 - Drift

Also see combined categories:
All Wheels
All Car and Buggy Wheels

Drift wheels


Related Information:


Wheels - Hobby - Car 1-10 - On Road - Complete
Wheels - Hobby - Car 1-10 - On Road - Complete

Also see combined categories:
All Wheels
All Car and Buggy Wheels

Patterned types


Related Information:


Belts - Vee - 16.5 x 11.0mm - B
Belts - Vee - 16.5 x 11.0mm - B

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

16.5mm Top Width x 11.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock
Pulleys - Timing - 14.000mm Pitch - GT - 115mm Wide - Taperlock

Also see combined categories:
All 14mm Pitch Timing Pulleys Taperlock

Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock. Use with GT2 or GT3 type belts.

Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.

Related Information:




1311002 Adler Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Gears - Spur - 12DP - 14.5 Degree - Steel
Gears - Spur -  12DP - 14.5 Degree - Steel

Also see combined categories:
All 12DP Spur Gears

PCD = No. of Teeth x 2.117mm (1/12 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

12 Diametrical Pitch. Approx 6.65mm between teeth.


Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning
Bearings - SDP - Needle Roller - Flange Mounted - Non Aligning

Also see combined categories:
All Press In Bearings

Fitted with drawn cup needle bearing. -30 to 110 oC. Retainer : Carbon Stee black oxide finish. Shafts must be hardened to Rc 58 with 0.8um surface finish or finer. Non aligning.

Related Information:


Balls - Tooling - One Piece - Construction - Steel
Balls - Tooling - One Piece - Construction - Steel

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations.

Ball and shank are concentric within 5 microns (0.0002 in.) TIR. 1144 steel heat treated to 53-57 RC. Precise shoulder base to ball centre line dimension within +/- 0.00508mm.

Related Information:


Balls - Tooling - One Piece - Standard - Steel - Press Fit
Balls - Tooling - One Piece - Standard - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC.

Related Information:


Balls - Tooling - One Piece - Standard - Steel - Slip Fit
Balls - Tooling - One Piece - Standard - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC.

Related Information:


Balls - Tooling - Two Piece - Standard - Steel - Press Fit
Balls - Tooling - Two Piece - Standard - Steel - Press Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:


Balls - Tooling - Two Piece - Standard - Steel - Slip Fit
Balls - Tooling - Two Piece - Standard - Steel - Slip Fit

Also see combined categories:
All Tooling Balls
All Standard Tooling Balls

High quality tooling balls provide a precise reference point for critical machining operations. Available with slip fit or light press fit shank diameters.

1144 steel heat treated to 53-57 RC. Weld between ball and shank is designed so the ball will fall off if subject to unusually heavy lateral force, preventing set up and inspection errors that may occur because of a bent shaft.

Related Information:


Motors - DC 18.9X18.0X9.5 mm
Motors - DC 18.9X18.0X9.5 mm

Also see combined categories:
All DC Motors

M-020 Series - 1 to 3 VDC - 3700 to 11000 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft. Weight Approx 9.5 grams.

Related Information:


Motors - DC 25.0X21.0 mm
Motors - DC 25.0X21.0 mm

Also see combined categories:
All DC Motors

M-14 Series 1.5 to 3 VDC - 4230 to 11280 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:


Pins - Ball Lock - Ball Handle - Plastic Handle
Pins - Ball Lock - Ball Handle - Plastic Handle

Also see combined categories:
All Ball Lock Pins

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.

Positive lock detent pins. Plastic Handles. 300 Grade Stainless Components. 440C Stainless Balls.

Related Information:


Pins - Ball Lock - T-Handle - Plastic Handle
Pins - Ball Lock - T-Handle - Plastic Handle

Also see combined categories:
All Ball Lock Pins

Quick release. Zinc plated C1144 steel pins with black plastic ball handles and spring loaded balls. Quick alternative to cotter pins. Tee handle.

Positive lock detent pins. Plastic Handles. Carbon steel components.

Related Information:


Snap Rings - Internal - Stainless Steel
Snap Rings - Internal - Stainless Steel

Also see combined categories:
All Internal Snaprings

Internal snaprings are similar to an internal circlip without the lugs

301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.


Anchors - Spring - Steel
Anchors - Spring - Steel

Also see combined categories:
All Spring Anchors

An economical way to secure the ends of extension springs, and provide easy adjustment.

C-12114 Steel with Black Oxide Finsh.


Straight Handpiece 6000 RPM W.H. Parts
Straight Handpiece 6000 RPM W.H. Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Stradic 4000 FI Shimano Parts
Stradic 4000 FI Shimano Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Strikes - Toggle Latch - Steel
Strikes - Toggle Latch - Steel


Used with toggle latches series 800, 802, 803 and 806



Stops - Spring - Flat Button
Stops - Spring - Flat Button

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is case hardened low carbon steel. Properly radiused nose for perfect fit with no wobble. Aluminium body.



Stops - Spring - Flat Face
Stops - Spring - Flat Face

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is case hardened low carbon steel. Properly radiused nose for perfect fit with no wobble. Aluminium body.



Stops - Spring - Flat Face - With Tang
Stops - Spring - Flat Face - With Tang

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is case hardened low carbon steel. Properly radiused nose for perfect fit with no wobble. Aluminium body.

Tang prevents thin gauge material from sliding under plunger.


Stops - Spring - Round Acetal Nose
Stops - Spring - Round Acetal Nose

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is hardened and ground smooth. Properly radiused nose for perfect fit with no wobble. Aluminium body.



Stops - Spring - Round Steel Nose
Stops - Spring - Round Steel Nose

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is hardened and ground smooth. Properly radiused nose for perfect fit with no wobble. Aluminium body.



Studs - Full Thread - Stainless Steel
Studs - Full Thread - Stainless Steel

Also see combined categories:
All Studs

18-8 Stainless Steel Allthread Threaded Bar

Short lengths of threaded 18-8 stainless steel bar.


Studs - Full Thread - Steel
Studs - Full Thread - Steel

Also see combined categories:
All Studs

Low carbon steel allthread threaded bar

Short lengths of threaded low carbon steel bar.


Standoffs - Hexagonal
Standoffs - Hexagonal


Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.



Standoffs - Round
Standoffs - Round


Swage Type - Threaded - Brass or Stainless Steel. Internal threaded pillars.



Studs - Ball - Threaded
Studs - Ball - Threaded


Zinc Plated Steel DIN 71803 Form C. Surface Hardened to 55 HRC (Ball (D1) Only - Thread is Not Hardened).


Studs - Shoulder - Machine
Studs - Shoulder - Machine


Machine shoulder studs can be used with idlers or tensioner arms



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 128546 products in 2318 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 128546 products in 2318 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.