Springs Die
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Related Information:
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Related Information:
Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.
Related Information:
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length. This category may be available in the new MBA online store at
Springs - Die - Imperial - Medium Duty.
Related Information:
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length. This category may be available in the new MBA online store at
Springs - Die - Imperial - Medium-Heavy Duty.
Related Information:
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length. This category may be available in the new MBA online store at
Springs - Die - Imperial - Heavy Duty.
Related Information:
Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.
Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length. This category may be available in the new MBA online store at
Springs - Die - Imperial - Extra Heavy Duty.
Related Information:
Colour coded blue
High tensile strength chromium alloy steels. Heat Resistance: Up to +230
oC (Loss of load occurs above +120
oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length. This category may be available in the new MBA online store at
Springs - Die - Metric - Medium Duty.
Related Information:
AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1. This category may be available in the new MBA online store at
Spiral Rings - External - Medium Duty - Carbon Steel.
Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1. This category may be available in the new MBA online store at
Spiral Rings - Internal - Medium Duty - Carbon Steel.
Basic imperial and metric e-clips DIN6799 and N1500. Carbon spring steel including zinc plated and plain.
Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. Includes plain and zinc plated. This category may be available in the new MBA online store at
E-Clips - Basic - Carbon Steel.
Related Information:
Colour coded red
High tensile strength chromium alloy steels. Heat Resistance: Up to +230
oC (Loss of load occurs above +120
oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length. This category may be available in the new MBA online store at
Springs - Die - Metric - Heavy Duty.
Related Information:
Colour coded green
High tensile strength chromium alloy steels. Heat Resistance: Up to +230
oC (Loss of load occurs above +120
oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length. This category may be available in the new MBA online store at
Springs - Die - Metric - Light Duty.
Related Information:
Colour coded yellow
High tensile strength chromium alloy steels. Heat Resistance: Up to +230
oC (Loss of load occurs above +120
oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length. This category may be available in the new MBA online store at
Springs - Die - Metric - Extra Heavy Duty.
Related Information:
AE / WS / AS3218 / RS / MIL-R-27426A1 - Stainless Steel.
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1. This category may be available in the new MBA online store at
Spiral Rings - External - Medium Duty - Stainless Steel.
Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Stainless Steel.
Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1. This category may be available in the new MBA online store at
Spiral Rings - Internal - Medium Duty - Stainless Steel.
AME / WST / RST - Spring Steel
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at
Spiral Rings - External - Medium-Heavy Duty - Carbon Steel.
Includes Series AMI / WHT / Spirolox RRT - Spring Steel
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT. This category may be available in the new MBA online store at
Spiral Rings - Internal - Medium-Heavy Duty - Carbon Steel.
SAE 1090 Spring Steel. Includes inch and metric sizes.
Related Information:
Used for shallow drawers, tool chests and medical carts.
Used for shallow drawers, tool chests and medical carts.
Hold in detent. Full extension. 12.7mm Side Space. Includes 32mm hole pattern as well as traditional hole pattern.
Used for shallow drawers, tool chests and medical carts.
Used for shallow drawers, tool chests and medical carts.
Used for shallow drawers, tool chests and medical carts.
High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.
For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking. This category may be available in the new MBA online store at
Mounts - Machinery - Industrial - Medium Duty.
Related Information:
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect. This category may be available in the new MBA online store at
Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext.
Used for Gauging and Positioning Light to Medium Loads. Ball slide and crossed roller types available.
Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish. This category may be available in the new MBA online store at
Positioning Stages.
Urethane springs are designed for use in applications where corrosion, vibration or magnetism prevent the use of conventional steel springs.
They replace steel coil springs in medium pressure applications involving space limitations, high blank holding pressure and adequate stripping. Durometer 95 shore A. Colour black. Tensile strength 5000 psi. Temperature range minus 40 to 80
oC. This category may be available in the new MBA online store at
Springs - Urethane.
Related Information:
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.
Includes series CE / VS / US - Spring Steel
Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.
Includes series CI / VH / UR - Spring Steel
Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.
AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel
Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2. This category may be available in the new MBA online store at
Spiral Rings - External - Heavy Duty - Carbon Steel.
Includes AHI / WHM / AS3215 / RRN / MIL-R-27426B2 - Spring Steel
Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2. This category may be available in the new MBA online store at
Spiral Rings - Internal - Heavy Duty - Carbon Steel.
Includes series CE / VS / US - Stainless Steel.
Light duty single turn rings used in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CE, Smalley: VS, Spirolox and Ramsey: US.
Includes series CI / VH / UR - Stainless Steel.
Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.
Elastomer bumpers provide excellent resistance to chemicals and humidity. 20 times greater durability than urethane.
10 greater durability than rubber and 500 times greater than steel coiled springs. Also see Mounts - Buffers. Maintains excellent resilience at extreme temperatures and remains flexible with no material degradation between -62
oC and +148 Deg C (-80 Deg F and +300 Deg F). Mounting screws not included. This category may be available in the new MBA online store at
Bumpers - Elastomer - Axial - Medium Energy - Low Reaction.
Tungsten Chrome Alloy - Carbon Steel die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
AME / WST / RST - Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST. This category may be available in the new MBA online store at
Spiral Rings - External - Medium-Heavy Duty - Stainless Steel.
Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.
Includes Series AMI / WHT / Spirolox RRT - Stainless Steel.
Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT. This category may be available in the new MBA online store at
Spiral Rings - Internal - Medium-Heavy Duty - Stainless Steel.
Neoprene elastomer springs have proven to be the safest, most efficient material for punching, stamping and drawing dies.
Major advantages include high loads, increased durability, better performance, no maintenance and long life. This category may be available in the new MBA online store at
Springs - Neoprene.
Related Information:
Over 10 million cycles. Built to take the tough abuse of high speed, long run, stamping operations. Ideal for use as parts lifters in dies, or other applications requiring exceptional long life.
Special long life springs. Black oxide finished bodies. Nylon locking element. Not recommended for use in aluminium applications.
Like a heavy duty roll pin.
Made of a high carbon spring steel with high elasticity, resilience and wear characteristics. Designed to replace solid steel tubular and case hardened bushings because they are close tolerance, self-retaining and through hard. Insertion can be easily accomplished with a hammer and drift. Ideal for high load/low-speed operation in articulating or continuous applications. This category may be available in the new MBA online store at
Bushings - Tension.
Excellent performance in electrical and magnetism sensitive applications. Higher speed than Zr02. Full ceramic silicon nitride.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. 3.2g/cubic cm density. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. Si3N4 (GSN-201) standard material for balls and rings. HRC80 Hardness. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 700 deg C without a cage or seals.
Related Information:
Acme Leadscrew Thread - Use with Acme Supernuts
Related Information:
Acme Leadscrew Thread - Use with Acme Supernuts
Related Information:
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Standard sizes numbers 0 to 14.
Threaded externally for easy extraction.
Related Information:
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.
Related Information:
Imperial Sizes Tapered 1:48 (1/4 in. per foot). Miniature sizes.
Related Information:
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138615
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.