Small Parts & Bearings - an MBA company

Snaps Spring Interlocking Style 3 Categories


Snaps


Snaps - Spring - Interlocking - Style 3
Snaps - Spring - Interlocking - Style 3

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



Snaps - Spring - Interlocking - Style 1
Snaps - Spring - Interlocking - Style 1

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



Snaps - Spring - Interlocking - Style 2
Snaps - Spring - Interlocking - Style 2

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



You may also be interested in

Isolators


Mounts - Vibration - Isolation - Cup Style 2
Mounts - Vibration - Isolation - Cup Style 2

Also see combined categories:
All Cup Mounts

Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.

High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils.


Catches - Snap In Style - Grabber -tm-
Catches - Snap In Style - Grabber -tm-


Fast economical installation.

Fits frames from 1.1 to 7.1mm thick. Installation hole size 15mm x 39.9mm. Push to close and pull to open. Spring loaded over centre action. Corrosion resistant black ABS with 303 stainless steel spring.


Circlips - External - Grooveless
Circlips - External - Grooveless

Also see combined categories:
All External Circlips

Includes MIL-R-21248/MS 90707 - Styles M1440 / Ellison GR / Seeger G and GA. Retaining rings. Snap Rings (USA).

Reusable tapered section rings for grooveless shafts like plastics, tubes or castings. Can be used where adjustable ring placement is desired - like progressively tightening a compression spring.

Related Information:


Snap Buttons - Single End - Spring Leg
Snap Buttons - Single End - Spring Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Collectibles - Metal Motorcycles
Collectibles - Metal Motorcycles


Beautiful model motorbikes in various styles including choppers, road bikes and vintage designs.

Made from industrial parts including bearings, screws, nuts, springs, chain links, rod, tubing and other parts. Two colours available - gunmetal grey or copper finish. Each bike is hand made, and therefore there may be minor differences between the bikes of a particular model. Re-Cycle motorbikes are a limited edition set of 20.


Snaps - Safety Hook
Snaps - Safety Hook

Also see combined categories:
All Snaps

Galvanised drop forged steel with stainless steel spring



Pins - Pull - Round Handle - Steel
Pins - Pull - Round Handle - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:


Pins - Pull - Tee Handle - Steel
Pins - Pull - Tee Handle - Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Zinc plated C1038 steel plugners and housings except 5/8 size which is 12L15 steel. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:


Pins - Pull - Round Handle - Stainless Steel
Pins - Pull - Round Handle - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:


Pins - Pull - Tee Handle - Stainless Steel
Pins - Pull - Tee Handle - Stainless Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. 303 stainless steel plunger assembly and housing. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:


Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:


Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:


E-Clips - Basic - Carbon Steel
E-Clips - Basic - Carbon Steel

Also see combined categories:
All E-Clips

Basic imperial and metric e-clips DIN6799 and N1500. Carbon spring steel including zinc plated and plain.

Not all e-clips are exactly the same style, however all follow the basic principal of a push on clip. Includes plain and zinc plated.

Related Information:


Circlips - External - Inverted
Circlips - External - Inverted

Also see combined categories:
All External Circlips

N1408 / SHI / 16626 / 4100 / 5108 - Spring Steel and Stainless Steel. Retaining rings. Snap Rings (USA).

Tapered section ring with lugs inverted on the ID to allow use in tight areas with minimal clearance. Less thrust load than standard circlips.

Related Information:


Snap Buttons - Double End
Snap Buttons - Double End

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Snap Buttons - Flat Type
Snap Buttons - Flat Type

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Latches - Slam Action - Slide
Latches - Slam Action - Slide


Fast snap in installation. Made from non-corrosive materials, black ABS plastic and stainless steel spring. Push to close latching.



Pins - Clik - Carbon Steel
Pins - Clik - Carbon Steel

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:


Pins - Clik - Mild Steel
Pins - Clik - Mild Steel

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:


Screws - Captive - Retractable - Steel
Screws - Captive - Retractable - Steel

Also see combined categories:
All Captive Screws

Compliance with UL 1950 and EN 60950 codes for access areas. Ratchet mechanism allows screw to be tightened down by hand, but a tool is needed to loosen.Fully retractable captive to the panel and spring ejected.

Press in style. Bright chromate zinc plated, case hardened steel with aluminium knob and stainless steel spring. Knobs available either slotted or no.2 phillips.


Pins - Clik - Stainless Steel 316 Grade
Pins - Clik - Stainless Steel 316 Grade

Also see combined categories:
All Clik Lynch Pins

Self locking ring snaps down to hold them securely in place. Easy grip ring for quick removal. Also known as a lynch pin.

Pin is made from carbon steel and heat treated to RA 50-60. Ring is hot drawn spring steel with hardness of RC 47-48. Zinc plated.

Related Information:


Spring Assemblies - Small Bracket - RINO
Spring Assemblies - Small Bracket - RINO


Spring: Stainless Steel 301 S21 Grade. Base: Aluminium Drum: High Impact Styrine. Constant force extension springs provide a huge range of application opportunities. Springs can be extended in excess of 50 times the relaxed length of the spring.

Related Information:


Spring Motor Assemblies - Open - RINO
Spring Motor Assemblies - Open - RINO

Also see combined categories:
All Spring Motors

Budget Assemblies. Average fatigue life of 5000 to 30000 cycles.

Springs : 301 Stainless Steel. Average fatigue life of 5,000 to 30,000 cycles.


Spring Motors - RINO
Spring Motors - RINO

Also see combined categories:
All Spring Motors

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.


Spring Motors - SDP
Spring Motors - SDP

Also see combined categories:
All Spring Motors

301 stainless Steel. Shipped as shown to be mounted on drums (not supplied) of the recommended diameters. Torque ratings listed are for the unwinding portion of the cycle. Torque at fully wound end of cycle will be slightly higher.


Springs - Compression - Conical
Springs - Compression - Conical

Also see combined categories:
All Conical Springs

Conical 302 Stainless steel springs

Solid height lower than a standard compression spring due to the conical shape. Ends are closed. Starting rate is the same as the kg/mm rate.

Related Information:


Springs - Compression - Long Lengths - Music Wire
Springs - Compression - Long Lengths - Music Wire

Also see combined categories:
All Compression Springs

1 metre and 914mm lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Related Information:


Springs - Compression - Long Lengths - Stainless Steel
Springs - Compression - Long Lengths - Stainless Steel

Also see combined categories:
All Compression Springs

1 metre and half metre lengths

Music wire to Din 17223 Class C. No. 1,1200. Stainless Steel wire to Din 17224 No. 1,4310.

Related Information:


Springs - Compression - Stainless Steel
Springs - Compression - Stainless Steel

Also see combined categories:
All Compression Springs

This category includes short and long lengths

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Related Information:


Springs - Compression - Steel
Springs - Compression - Steel

Also see combined categories:
All Compression Springs

This category includes short and long lengths

Standard springs may or may not be supplied with ends ground flush. If the end type is important to your application please contact us for more information or a special quote.

Related Information:


Springs - Drawbar - Stainless Steel
Springs - Drawbar - Stainless Steel

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Related Information:


Springs - Drawbar - Zinc Plated
Springs - Drawbar - Zinc Plated

Also see combined categories:
All Drawbar Springs

Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.

This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.

Related Information:


Springs - Constant Force
Springs - Constant Force


301 Stainless Steel

Mounting hole specifications will be supplied on request. These springs are usually mounted on a drum and the free end attached to a loading force like a counterbalance. Free ID may vary to meet load specification. Load capacity can be increased by using multiple strips in tandem, back to back or laminated. Be sure to leave at least 40mm coiled on the drum at full extension. The spring ID will wrap tightly on the drum so that most applications require no fastening to the drum.

Related Information:


Springs - Die - Imperial - Extra Heavy Duty
Springs - Die - Imperial - Extra Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded green. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 25 percent of the length.

Related Information:


Springs - Die - Imperial - Heavy Duty
Springs - Die - Imperial - Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded gold. Efficient operating range is 15 to 25 percent of the length. Maximum deflection is 30 percent of the length.

Related Information:


Springs - Die - Imperial - Heavy Duty - Chrome Silicon
Springs - Die - Imperial - Heavy Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded gold. Efficient operating range is 15 to 20 percent of the length. Maximum deflection is 30 percent of the length.

Related Information:


Springs - Die - Imperial - Medium Duty
Springs - Die - Imperial - Medium Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded blue. Efficient operating range is 25 to 40 percent of the length. Maximum deflection is 50 percent of the length.

Related Information:


Springs - Die - Imperial - Medium Duty - Chrome Silicon
Springs - Die - Imperial - Medium Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded blue. Efficient operating range is 25 to 35 percent of the length. Maximum deflection is 50 percent of the length.

Related Information:


Springs - Die - Imperial - Medium-Heavy Duty
Springs - Die - Imperial - Medium-Heavy Duty

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Vapor degassed high tensile strength chromium alloy steel. Spring ends are ground square. Designed for long life cycle with constant high end deflections and shot peened to increase fatigue life.

Colour coded red. Efficient operating range is 20 to 30 percent of the length. Maximum deflection is 37 percent of the length.

Related Information:


Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon
Springs - Die - Imperial - Medium Heavy Duty - Chrome Silicon

Also see combined categories:
All Imperial Die Springs
All All Die Springs

Chrome silicon die springs are longer lasting than high carbon steel. Shot peened to reduce working stress and to improve the surface.

Colour coded red. Efficient operating range is 20 to 25 percent of the length. Maximum deflection is 37 percent of the length.

Related Information:


Springs - Die - Metric - Extra Heavy Duty
Springs - Die - Metric - Extra Heavy Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded yellow

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Springs - Die - Metric - Heavy Duty
Springs - Die - Metric - Heavy Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded red

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Springs - Die - Metric - Light Duty
Springs - Die - Metric - Light Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded green

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Springs - Die - Metric - Medium Duty
Springs - Die - Metric - Medium Duty

Also see combined categories:
All Metric Die Springs
All All Die Springs

Colour coded blue

High tensile strength chromium alloy steels. Heat Resistance: Up to +230oC (Loss of load occurs above +120oC). Spring Ends: Squared and ground. For compressed length, Subtract Deflection from Free Length.

Related Information:


Springs - Extension - Music Wire
Springs - Extension - Music Wire

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:


Springs - Extension - Stainless Steel
Springs - Extension - Stainless Steel

Also see combined categories:
All Extension Springs

Includes long lengths up to 1 metre

Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.