Small Parts & Bearings - an MBA company

Snap Buttons Flat Type Categories


Snap Buttons


Snap Buttons - Flat Type
Snap Buttons - Flat Type

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Snap Buttons - Double End
Snap Buttons - Double End

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Snap Buttons - Single End - Dog Leg
Snap Buttons - Single End - Dog Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Snap Buttons - Single End - Spring Leg
Snap Buttons - Single End - Spring Leg

Also see combined categories:
All Snap Buttons

Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.

Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating.


Stops - Spring - Flat Button
Stops - Spring - Flat Button

Also see combined categories:
All Spring Stops

Spring stops are used extensively in the locating of parts in jigs and fixtures, particularly where fixture walls are not available. Plunger is case hardened low carbon steel. Properly radiused nose for perfect fit with no wobble. Aluminium body.



Push Button Yoshida Parts
Push Button Yoshida Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


557 Push Button Lares Parts
557 Push Button Lares Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


639B - 639C Push Button Kavo Parts
639B - 639C Push Button Kavo Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


4000 S-SL Push Button Siemens Parts
4000 S-SL Push Button Siemens Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:


Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:


Bumpers - Round - Urethane - Female Washer
Bumpers - Round - Urethane - Female Washer

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.



Washers - Flat - Carbon Spring Steel - Precision Shim
Washers - Flat - Carbon Spring Steel - Precision Shim

Also see combined categories:
All Precision Shim Washers
All Flat Washers and Spacers - Metallic

Flat Carbon Spring Steel Washers. Commonly used for fast and accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.

C1010 steel types best suited to arbor shimming.

Related Information:


Ball Buttons
Ball Buttons


Also known as striker bushings or ball plunger detents. Use with ball or bolt spring plungers for a hard wearing contact area.

Burnished ground hardened steel.


Screws - Button - Socket - 304 Stainless
Screws - Button - Socket - 304 Stainless

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:


Screws - Button - Socket - 316 Stainless
Screws - Button - Socket - 316 Stainless

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:


Screws - Button - Socket - Alloy Steel
Screws - Button - Socket - Alloy Steel

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:


Screws - Button - Socket - Aluminium
Screws - Button - Socket - Aluminium

Also see combined categories:
All Machine Screws
All Socket Button Screws

Variety of colours available.

Other colours available on request. Minimum quantities will apply. Metric Sizes to DIN7380.

Related Information:


Screws - Button - Socket - For Sheet Metal
Screws - Button - Socket - For Sheet Metal

Also see combined categories:
All Machine Screws
All Socket Button Screws

Sheet metal screws


Related Information:


Screws - Button - Socket - Zinc Plated
Screws - Button - Socket - Zinc Plated

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:


Screws - Button - Torx - Stainless
Screws - Button - Torx - Stainless

Also see combined categories:
All Machine Screws

UNC - UNF

Nuts sold seperately - See Nuts.

Related Information:


Screws - Security - Button - Socket
Screws - Security - Button - Socket

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:


Magnets - Alnico - Button
Magnets - Alnico - Button

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper



Pins - Ball Lock - Button Handle - Commercial
Pins - Ball Lock - Button Handle - Commercial

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Also called detent pins.

Economical. Positive lock detent pins. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Related Information:


Pins - Ball Lock - Button Handle - Stainless Steel
Pins - Ball Lock - Button Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.

Positive lock detent pins.

Related Information:


Pins - Ball Lock - Button Handle - Steel
Pins - Ball Lock - Button Handle - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium. Also called detent pins.

Positive lock detent pins.

Related Information:


Tools - Dies - High Speed Steel
Tools - Dies - High Speed Steel

Also see combined categories:
All Dies
All Tools

High Speed Steel Button Dies



Nuts - Quick Release
Nuts - Quick Release

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.


Tools - Dies - Carbon Steel
Tools - Dies - Carbon Steel

Also see combined categories:
All Dies
All Tools

Tungsten Chrome Alloy - Carbon Steel Button dies and die nuts starting from M1 and 0-80 UNF. Many unusual sizes - M1.2, M1.4, M1.6, M1.7, BA Sizes, 2-56 and more. Sutton - PN - Bordo.



Nuts - Hexagonal - Brass
Nuts - Hexagonal - Brass

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Nuts marked as type SCALE have the same dimension across flats as the brass hex head screw of the same thread size.


Snap Rings - External - Basic
Snap Rings - External - Basic

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment.


Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.


Snap Rings - Internal - Stainless Steel
Snap Rings - Internal - Stainless Steel

Also see combined categories:
All Internal Snaprings

Internal snaprings are similar to an internal circlip without the lugs

301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.


Snaps - Double Pattern
Snaps - Double Pattern

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Snaps - Fast Eye
Snaps - Fast Eye

Also see combined categories:
All Snaps

Plated alloy steel



Snaps - Open Eye -Electro Galvanized
Snaps - Open Eye -Electro Galvanized

Also see combined categories:
All Snaps

Malleable iron



Snaps - Safety Hook
Snaps - Safety Hook

Also see combined categories:
All Snaps

Galvanised drop forged steel with stainless steel spring



Snaps - Spring - Interlocking - Style 1
Snaps - Spring - Interlocking - Style 1

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



Snaps - Spring - Interlocking - Style 2
Snaps - Spring - Interlocking - Style 2

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



Snaps - Spring - Interlocking - Style 3
Snaps - Spring - Interlocking - Style 3

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



Snaps - Steel Wire - Bit
Snaps - Steel Wire - Bit


Zinc Plated



Snaps - Steel Wire - Bodies
Snaps - Steel Wire - Bodies


Nickel Plated



Snaps - Steel Wire - Open Swivel
Snaps - Steel Wire - Open Swivel


Zinc Plated



Snaps - Steel Wire - Swivel Eye
Snaps - Steel Wire - Swivel Eye


Nickel Plated



Snaps - Swivel Body Decoy
Snaps - Swivel Body Decoy

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Snaps - Swivel Eye - Aluminium
Snaps - Swivel Eye - Aluminium

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124473 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124473 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.