Small Parts & Bearings - an MBA company

Slides Drawer Front Disconnect Friction 19mm Ext Undercarriage Categories


Linear Slides


Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.


Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext
Slides - Drawer - Stainless - Front Disconnect - Lever - 19mm Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive locking mechanism keeps drawer locked in the open position until actively released. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Slides - Drawer - Front Disconnect - Lever - Full Ext
Slides - Drawer - Front Disconnect - Lever - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Slides - Drawer - Front Disconnect - Latch Lever - Full Ext
Slides - Drawer - Front Disconnect - Latch Lever - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by pressing a drawer latch lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - 19mm Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - 19mm Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Positive stop slide that will not disconnect once installed. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).


Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext
Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect.


Slides - Drawer - Medium Duty - Undercarriage Mount
Slides - Drawer - Medium Duty - Undercarriage Mount

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. 21mm over travel.


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.


Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.


Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext
Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out - Full Ext

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Non locking. 19.1mm side space.


Slides - Drawer - Medium Duty - Non Disconnect - Compact
Slides - Drawer - Medium Duty - Non Disconnect - Compact

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

19.1mm Extension. 9.7mm Side Space.


Slides - Drawer - Heavy Duty - No Disconnect
Slides - Drawer - Heavy Duty - No Disconnect

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Non disconnect. Hold in detent full extension. 19.1mm side space.


Slides - Drawer - Medium Duty - Lever Disconnect
Slides - Drawer - Medium Duty - Lever Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. Full extension. 12.7mm Side Space. Includes 32mm hole pattern as well as traditional hole pattern.


Slides - Drawer - Medium Duty - Easy Disconnect
Slides - Drawer - Medium Duty - Easy Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Rail mounting. Hold in detent. Full extension. 13.5mm Side space. Includes 32mm hole pattern as well as traditional hole pattern.


Slides - Drawer - Heavy Duty - Lever Disconnect - Dual Lock
Slides - Drawer - Heavy Duty - Lever Disconnect - Dual Lock

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Lock in or lock out. 25.4mm over travel. 12.7mm side space.


Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out
Slides - Drawer - Heavy Duty - Lever Disconnect - Lock Out

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Lever Disconnect. Lock out only. 25.4mm over travel. 12.7mm side space.


Slides - Drawer - Heavy Duty - No Disconnect - Compact
Slides - Drawer - Heavy Duty - No Disconnect - Compact

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Non disconnect. 25.4mm over travel. 12.7mm side space.


Slides - Drawer - Light Duty - Lever Disconnect
Slides - Drawer - Light Duty - Lever Disconnect

Also see combined categories:
All Drawer Slides

Used for desks, credenzas and cabinets.

Low profile. Hold in detent. Includes 32mm hole pattern as well as traditional hole pattern.


Slides - Drawer - Medium Duty - Full Ext
Slides - Drawer - Medium Duty - Full Ext

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

Hold in detent. 12.7mm Side Space.


Slides - Drawer - Medium Duty - Non-Disconnect
Slides - Drawer - Medium Duty - Non-Disconnect

Also see combined categories:
All Drawer Slides

Used for shallow drawers, tool chests and medical carts.

22.4mm over travel. 19.1mm Side Space.


Slides - Drawer - Extra Heavy Duty
Slides - Drawer - Extra Heavy Duty

Also see combined categories:
All Drawer Slides

Ideal for computer server stotage, tool boxes, service truck tool drawers and vehicle battery trays. Full extension extra heavy duty slide. 220kg load rating for moderate use, 175kg for frequent use, 130kg for mobile (vehicular) use.

65kg load rating for flat mount applications. Slide space required 19.1mm. Slide includes a silencing bumper for drawer closure. Caution - slide must never be used as a pull-out step, platform or any application supporting human weight.


Linear - Assemblies - Ball Slide - Precision
Linear - Assemblies - Ball Slide - Precision


These precision ball slides have a typical coefficient of friction of 0.003 and provide straight line accuracy of 0.0005mm per mm of travel.

At load capacity a life of 250 million mm of travel can be expected. The expected life at half load capacity is 2.5 billion mm. Factory preload adjustment prevents sideplay and backlash. Lightweight aluminium carriage and base with high load capacity. Four tapped and threaded carriage holes and counterbored base holes simplify installation and component mounting. Long life, self cleaning ball bearing needs no lubrication. Positional repeatability 0.005mm. Clear anodised finish.


Slides - Linear - Cross Roller Rail
Slides - Linear - Cross Roller Rail

Also see combined categories:
All Linear Slides

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.


Ball Slides - Crossed Roller Positioning Stages
Ball Slides - Crossed Roller Positioning Stages


Used for Gauging and Positioning Light to Medium Loads.

Spring loaded micrometer drives allow precise repeatable adjustments with low friction and zero backlash. Positioning Slides can be stacked for Multi axis applications. Preloaded positioning slides fully assemebled. Black Anodized Finish.


Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent
Slides - Drawer - Heavy Duty - Rail Mounting - Hold In Detent

Also see combined categories:
All Drawer Slides

Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.

Full extension. Includes 32mm hole pattern as well as traditional hole pattern. Designed for units up to 760mm wide.


Linear Slides - Cross Roller Tables - Aluminium
Linear Slides - Cross Roller Tables - Aluminium

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


Linear Slides - Cross Roller Tables - Steel
Linear Slides - Cross Roller Tables - Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


Linear Slides - Low Profile - Crossed Roller Table - Aluminium
Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.


Linear Guide System - Low Profile - Size 17
Linear Guide System - Low Profile - Size 17

Also see combined categories:
All Linear Slides

Carriage Assembly and Rails sold separately. Listed in the same category.

Low-Load applications. Max load 50N. Self Lubricating. Corrosion Resistant. Low Friction. Max Speed 15 m/s. Operating Temp -40o to 90o Celius.


Linear Slide - Drylin - Carriage Assembly
Linear Slide - Drylin - Carriage Assembly

Also see combined categories:
All Linear Slides

Insensitive to dust and dirt. Match with Drylin Rail sold seperately.

Match size 1 assembly with size 1 rail or size 2 assembly with size 2 rail. Flat and wide for supporting high moments. Low friction value for dry running. Rugged, corrosion-free and wear-resistant. Low noise operation - rail made of hard anodised aluminium - liners made from Iglidur J.

Related Information:


Linear Slide - Drylin - Rail
Linear Slide - Drylin - Rail

Also see combined categories:
All Linear Slides

Insensitive to dust and dirt. Match with Drylin Carriage Assembly sold seperately.

Match size 1 assembly with size 1 rail or size 2 assembly with size 2 rail. Flat and wide for supporting high moments. Low friction value for dry running. Rugged, corrosion-free and wear-resistant. Low noise operation - rail made of hard anodised aluminium - liners made from Iglidur J.

Related Information:


Rod Ends - Steel - Studded - Quick Disconnect - Female
Rod Ends - Steel - Studded - Quick Disconnect - Female

Also see combined categories:
All Female Rod Ends with Stud

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.


Snaps - Spring - Interlocking - Style 1
Snaps - Spring - Interlocking - Style 1

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



Snaps - Spring - Interlocking - Style 2
Snaps - Spring - Interlocking - Style 2

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



Snaps - Spring - Interlocking - Style 3
Snaps - Spring - Interlocking - Style 3

Also see combined categories:
All Snaps

Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.



Friction Grip Yoshida Parts
Friction Grip Yoshida Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Bearings - One Way - Sprag - Standard
Bearings - One Way - Sprag - Standard

Also see combined categories:
All One Way Clutch Bearings

Sprag clutch bearings allow your application to turn one way whilst locking in the opposite direction.

Designed for press fit installation. Correct interference dimensions must be maintained to obtain maximum bearing and clutch performance. Mount the clutch ensuring that the shaft drive directionis in the direction indicated by the arrow on the inner race. To install, use a press tool / do not hammer or apply other stock to clutch. Make sure housing has enough strength to withstand press required for fitting installation. High carbon hardened steel alloy. Always lock out power switch before installing, removing, lubricating or servicing a system that uses Cam Clutch products. When connecting or disconnecting Cam Clutch products, eye protection is required. Wear safety glasses, protective clothing, gloves and safety shoes.

Related Information:


639A Friction Grip Kavo Parts
639A Friction Grip Kavo Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.


Black Pearl Friction Grip Bien Air Parts
Black Pearl Friction Grip Bien Air Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.




Torches
Torches


Includes hands free and friction recharge types and night vision preservation


Related Information:


O-Rings - Quad
O-Rings - Quad

Also see combined categories:
All O-Rings

Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings.

Related Information:


Clutches - Slip - Inline
Clutches - Slip - Inline

Also see combined categories:
All Slip Clutches

Multiplate Design.

Fully adjustable within rating limits. Low stick / slip ratio. Continuous slip within dissipation limit. Zinc plated steel housing with brass plates. Proprietary non-asbestos friction material.

Related Information:


Bushes - Plastic - X-Lube - Flanged
Bushes - Plastic - X-Lube - Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

Self lubricating - low friction - non-corrosive - light weight - chemical resistant.

Molybdenum Disulphide filled Nylon 6. Pricing is highly quantity dependant. Please enquire. Note! X-Lube bushes are moulded to nominal tolerances for non critical applications. You will need to machine these bushes to obtain better tolerances and finish.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124370 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124370 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.