Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Screws Square Head Categories
Screws - Set - Cup Point - Square Head
Grade 8 hreat treated alloy steel. All screws are threaded to the head.
Screws - Set - Dog Point - Square Head
Grade 8 hreat treated alloy steel. All screws are threaded to the head.
You may also be interested in
Screws Security
Screws - Security - Post Combi Square - Pan Head - Super Zinc
Each 200 pack comes with a Post Combination Driver Bit. Metric only.
Use special tool listed under Screws - Securty - Socket - Tools.
Related Information:
Housings for Ball Bearings
Housings - Bearing - Square - Miniature
Aluminium housings to suit standard radial ball bearings.
Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.
Nuts Specialty
Nuts - Square - Machine Screw
For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards
Screws Security
Screws - Security - Post Combi Square - Tools
Metric only.
Used for two hole security screws.
Related Information:
Leadscrews
Leadscrew Nuts - Metric - Square - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
Related Information:
Screws - Roof Bolt - Steel
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Low Head - Socket
UNC - UNF - METRIC - Alloy Steel.
Note. Hex key size may. The size listed is the usual and minimum size.
Related Information:
Screws - Low Head - Socket - 316L Stainless
316L Stainless Steel. Other sizes available on request.
Hexagon socket cap head with low head. Safety improvements and compact size for equipment and devices. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. All clean washed, preventing the inclusion of oil and foreign particles.
Screws - Fillister Head - 304 Stainless - Philips
UNC Only
Nuts sold seperately - See Nuts.
Related Information:
Screws - Fillister Head - 304 Stainless - Slotted
Metric - UNC - UNF
Nuts sold seperately - See Nuts. DIN 84.
Related Information:
Screws - Fillister Head - 316 Stainless - Slotted
Metric - UNC - UNF
Nuts sold seperately - See Nuts. DIN 84.
Related Information:
Screws - Fillister Head - Brass - Philips
Brass metal thread machine screws BA and METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Fillister Head - Brass - Slotted
Brass metal thread machine screws BA and METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Fillister Head - Nylon - Slotted
UNC - UNF. Cheese head
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
Screws - Fillister Head - Steel - Philips
Metal Thread Screws BA - UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Fillister Head - Steel - Slotted
Metal Thread Screws BA - UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Hex Head - 304 Stainless
Metric - UNF - UNC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Hex Head - Brass
Brass metal thread machine screws UNC and UNF
Nuts sold seperately - See Nuts.
Related Information:
Screws - Hex Head - Set - Titanium Ti-Gr5 - Ti-6Al4v
Fully threaded hex head set screws (DIN933). Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Used in critical aircraft structural components. UNS R56400. Din 933. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.
Related Information:
Screws - Hex Head - Steel - Zinc Plated - Full Thread
BSW and METRIC - Set Screws
Related Information:
Screws - Hex Head - Titanium CP Grade 1
Fully threaded hex head set screws (DIN933). CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Din 933. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
Screws - Binder Head - Nylon - Philips
UNC - UNF - Metric
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
Screws - Binder Head - Nylon - Slotted
UNC and UNF
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
Screws - Pan Head - 303-304 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - 303-304 Stainless - Pozidrive
Metric Only
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - 303-304 Stainless - Slotted
Metric Only
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - 316 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - 316 Stainless - Pozidrive
Metric Only
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Aluminium
UNC metal thread machine screws
Nuts sold separately - See Fasteners - Nuts.
Related Information:
Screws - Pan Head - Brass - Slotted
Brass metal thread machine screws METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Nylon - Slotted
UNC - UNF - Metric
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
Screws - Pan Head - PEEK - Philips
Machine screws. PEEK is a super-engineering thermoplastic with special physical and chemical characteristics. Excellent resistance to chemicals, water, abrasion, shock, fatigue, radiation, heat, etc. PEEK is registered trademark of VitreTM.
Excellent chemical resistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent thermal and water resistance; maintains high heat-resistance strength. Excellent abrasion, shock and fatigue resistance. Excellent radiation resistance and electrical properties. Heat-resistant temperature: 180o Celcius (UL approved temperature). Excellent flame-resistance cleared by UL standard 94V-0. Useful for hot-water pumps, chemical pumps, chemical-resistant applications such as FPD (Flat Panel Display) and semiconductor production equipment/devices, printed circuit board etching devices, metal plating equipment and chemical plants. Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20mm. For further information on the special properties of plastic screws and cautions concerning their use, please contact sales.
Related Information:
Screws - Pan Head - Steel - Philips
Metal Thread Screws UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Steel - Pozidrive
Metal Thread Screws. Metric only.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Steel - Slotted
Metal Thread Screws. Metric only.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
Screws - Round Head - 304 Stainless - Slotted
Metric Only
Nuts sold seperately - See Nuts.
Related Information:
Screws - Round Head - Brass - Slotted
Brass metal thread machine screws BSW - UNF - UNC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Round Head - Nylon - Slotted
UNC - UNF
Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.
Related Information:
Screws - Round Head - Steel - Slotted
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts.
Related Information:
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 127000 products in 2359 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
