Small Parts & Bearings - an MBA company

Screws Security Post Combi Square Pan Head Super Zinc Categories


Screws Security


Screws - Security - Post Combi Square - Pan Head - Super Zinc
Screws - Security - Post Combi Square - Pan Head - Super Zinc

Also see combined categories:
All Security Screws

Each 200 pack comes with a Post Combination Driver Bit. Metric only.

Use special tool listed under Screws - Securty - Socket - Tools.

Related Information:


Screws - Security - Post Combi Square - Tools
Screws - Security - Post Combi Square - Tools

Also see combined categories:
All Security Screw Tools

Metric only.

Used for two hole security screws.

Related Information:


Screws - Set - Cup Point - Square Head
Screws - Set - Cup Point - Square Head


Grade 8 hreat treated alloy steel. All screws are threaded to the head.



Screws - Set - Dog Point - Square Head
Screws - Set - Dog Point - Square Head


Grade 8 hreat treated alloy steel. All screws are threaded to the head.



Screws - Pan Head - PEEK - Philips
Screws - Pan Head - PEEK - Philips

Also see combined categories:
All Machine Screws
All Plastic Screws

Machine screws. PEEK is a super-engineering thermoplastic with special physical and chemical characteristics. Excellent resistance to chemicals, water, abrasion, shock, fatigue, radiation, heat, etc. PEEK is registered trademark of VitreTM.

Excellent chemical resistance, impenetrable by most chemicals with the exception of concentrated sulphuric acid. Excellent thermal and water resistance; maintains high heat-resistance strength. Excellent abrasion, shock and fatigue resistance. Excellent radiation resistance and electrical properties. Heat-resistant temperature: 180o Celcius (UL approved temperature). Excellent flame-resistance cleared by UL standard 94V-0. Useful for hot-water pumps, chemical pumps, chemical-resistant applications such as FPD (Flat Panel Display) and semiconductor production equipment/devices, printed circuit board etching devices, metal plating equipment and chemical plants. Use with a nut to compensate for thread moulding pitch errors. When a nut is not used, it is recommended that the overlap of mating screw threads be shorter than 20mm. For further information on the special properties of plastic screws and cautions concerning their use, please contact sales.

Related Information:


Screws - Security - Button - Socket
Screws - Security - Button - Socket

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:


Screws - Security - Cap - Socket
Screws - Security - Cap - Socket

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:


Screws - Security - Socket - Countersunk - Stainless
Screws - Security - Socket - Countersunk - Stainless

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:


Screws - Security - Socket - Countersunk - Zinc Plated
Screws - Security - Socket - Countersunk - Zinc Plated

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:


Screws - Security - Socket - Tools
Screws - Security - Socket - Tools

Also see combined categories:
All Security Screw Tools

Only available to users of the Socket Type Security Screws. Metric only.

Used for hex socket security screws.

Related Information:


Housings - Bearing - Square - Miniature
Housings - Bearing - Square - Miniature


Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.


Screws - Pan Head - 303-304 Stainless - Philips
Screws - Pan Head - 303-304 Stainless - Philips

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 303-304 Stainless - Pozidrive
Screws - Pan Head - 303-304 Stainless - Pozidrive

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 303-304 Stainless - Slotted
Screws - Pan Head - 303-304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 316 Stainless - Philips
Screws - Pan Head - 316 Stainless - Philips

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 316 Stainless - Pozidrive
Screws - Pan Head - 316 Stainless - Pozidrive

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - Aluminium
Screws - Pan Head - Aluminium

Also see combined categories:
All Machine Screws

UNC metal thread machine screws

Nuts sold separately - See Fasteners - Nuts.

Related Information:


Screws - Pan Head - Brass - Slotted
Screws - Pan Head - Brass - Slotted

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws METRIC

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - Nylon - Slotted
Screws - Pan Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF - Metric

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Screws - Pan Head - Steel - Philips
Screws - Pan Head - Steel - Philips

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - Steel - Pozidrive
Screws - Pan Head - Steel - Pozidrive

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - Steel - Slotted
Screws - Pan Head - Steel - Slotted

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - Titanium CP Grade 1 - Philips Drive
Screws - Pan Head - Titanium CP Grade 1 - Philips Drive

Also see combined categories:
All Machine Screws

Metal Thread Screws. Metric only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Nuts sold seperately - See Nuts. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.

Related Information:


Screws - Self Drilling - Pan Head
Screws - Self Drilling - Pan Head

Also see combined categories:
All Self Drilling Screws

Zinc chromate fluted point. Used for fastening sheet metal to wood or metal. Drills, taps and fastens in one application.



Screws - Self Tapping - Pan Head - 302 - 304 Stainless
Screws - Self Tapping - Pan Head - 302 - 304 Stainless

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - 316 Stainless
Screws - Self Tapping - Pan Head - 316 Stainless

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - Steel - Black Oxide
Screws - Self Tapping - Pan Head - Steel - Black Oxide

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Self Tapping - Pan Head - Zinc Plated
Screws - Self Tapping - Pan Head - Zinc Plated

Also see combined categories:
All Self Tapping Screws

Type AB Steel Self Tapping Screws.

Length is from the tip of the screw to the base of the head. Ie, does not include the head.


Screws - Binder Head - Nylon - Philips
Screws - Binder Head - Nylon - Philips

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF - Metric

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Screws - Binder Head - Nylon - Slotted
Screws - Binder Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC and UNF

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Screws - Self Tapping - For Soft Plastics - Pan Head
Screws - Self Tapping - For Soft Plastics - Pan Head

Also see combined categories:
All Self Tapping Screws
All Self Tapping Screws for Plastics

Tri-Lobe Course Thread Plastic Threading Screws

Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.


Screws - Self Tapping - For Hard or Soft Plastics - Pan Head
Screws - Self Tapping - For Hard or Soft Plastics - Pan Head

Also see combined categories:
All Self Tapping Screws
All Self Tapping Screws for Plastics

Tri-Lobe Course Thread Plastic Threading Screws

Thread cutting screws for plastics. Be sure to select correct screw for hard or soft plastic threadcutting.


Nuts - Square - Machine Screw
Nuts - Square - Machine Screw


For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards



Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:


Screws - Panel - Stainless
Screws - Panel - Stainless

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. 303 Stainless Steel.



Screws - Panel - Steel
Screws - Panel - Steel

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. Carbon steel with black oxide finish.



Screws - Panel - Jack - Steel
Screws - Panel - Jack - Steel

Also see combined categories:
All Panel Screws

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.


Screws - Low Head - Socket
Screws - Low Head - Socket

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Alloy Steel.

Note. Hex key size may. The size listed is the usual and minimum size.

Related Information:


Screws - Low Head - Socket - 316L Stainless
Screws - Low Head - Socket - 316L Stainless

Also see combined categories:
All Machine Screws
All Socket Cap Screws

316L Stainless Steel. Other sizes available on request.

Hexagon socket cap head with low head. Safety improvements and compact size for equipment and devices. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. All clean washed, preventing the inclusion of oil and foreign particles.


Screws - Fillister Head - 304 Stainless - Philips
Screws - Fillister Head - 304 Stainless - Philips

Also see combined categories:
All Machine Screws

UNC Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Fillister Head - 304 Stainless - Slotted
Screws - Fillister Head - 304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric - UNC - UNF

Nuts sold seperately - See Nuts. DIN 84.

Related Information:


Screws - Fillister Head - 316 Stainless - Slotted
Screws - Fillister Head - 316 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric - UNC - UNF

Nuts sold seperately - See Nuts. DIN 84.

Related Information:


Screws - Fillister Head - Brass - Philips
Screws - Fillister Head - Brass - Philips

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws BA and METRIC

Nuts sold seperately - See Nuts.

Related Information:


Screws - Fillister Head - Brass - Slotted
Screws - Fillister Head - Brass - Slotted

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws BA and METRIC

Nuts sold seperately - See Nuts.

Related Information:


Screws - Fillister Head - Nylon - Slotted
Screws - Fillister Head - Nylon - Slotted

Also see combined categories:
All Machine Screws
All Plastic Screws

UNC - UNF. Cheese head

Non Conductive. Non Corrosive. Non Magnetic. Lightweight. Vibration Resistant.

Related Information:


Screws - Fillister Head - Steel - Philips
Screws - Fillister Head - Steel - Philips

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:


Screws - Fillister Head - Steel - Slotted
Screws - Fillister Head - Steel - Slotted

Also see combined categories:
All Machine Screws

Metal Thread Screws BA - UNC - UNF - METRIC

Nuts sold seperately - See Nuts.

Related Information:


Screws - Hex Head - 304 Stainless
Screws - Hex Head - 304 Stainless

Also see combined categories:
All Machine Screws

Metric - UNF - UNC

Nuts sold seperately - See Nuts.

Related Information:


Screws - Hex Head - Brass
Screws - Hex Head - Brass

Also see combined categories:
All Machine Screws
All Brass Machine Screws

Brass metal thread machine screws UNC and UNF

Nuts sold seperately - See Nuts.

Related Information:


Screws - Hex Head - Plain - Nylon
Screws - Hex Head - Plain - Nylon

Also see combined categories:
All Hex Head Screws
All Plastic Screws

UNC - UNF


Related Information:


Main Pages

About Us Balls List Bearings List Brands Bulk Offers Catalogue Clearance Items List Contact Us Charity Dental Bearings Dowel Pins Downloadable PDF Catalogue Acetal Bearings Downloadable PDF Catalogue Ball Lock Pins Downloadable PDF Catalogue Balls Downloadable PDF Catalogue Ceramic Bearings Downloadable PDF Catalogue Circlips Downloadable PDF Catalogue Corrosion Resistant Bearings Downloadable PDF Catalogue Dowel Pins Downloadable PDF Catalogue Economy Bearings Downloadable PDF Catalogue Hammer Drive Pins Downloadable PDF Catalogue High Speed Bearings Downloadable PDF Catalogue Key Steel Downloadable PDF Catalogue Knobs Downloadable PDF Catalogue Metallic Bushes Downloadable PDF Catalogue O-Rings Downloadable PDF Catalogue Pins Downloadable PDF Catalogue Poly Vee Belts and Pulleys Downloadable PDF Catalogue Precision Shim Washers Downloadable PDF Catalogue Rod & Tube Downloadable PDF Catalogue Roll Pins Downloadable PDF Catalogue Shaft Collars Downloadable PDF Catalogue Shim Sheet Downloadable PDF Catalogue Shoulder Screws Downloadable PDF Catalogue Sintered Bronze Bushes Downloadable PDF Catalogue Socket Set Screws Downloadable PDF Catalogue Solid Bronze Bushes Downloadable PDF Catalogue Spring Steel Strip Downloadable PDF Catalogue Springs Downloadable PDF Catalogue Standard Ball Bearing Range Downloadable PDF Catalogue Super Precision Bearings Downloadable PDF Catalogue Taper Pins Downloadable PDF Catalogue Thmb Screws and Nuts Downloadable PDF Catalogue Thrust Bearings Downloadable PDF Catalogue Timing Belts Downloadable PDF Catalogue Timing Pulley Stock Downloadable PDF Catalogue Timing Pulleys Downloadable PDF Catalogue Vibration Mounts Downloadable PDF Catalogue Washers Downloadable PDF Catalogue Wave Washers Downloadable PDF Cross Reference ADR and SKF Downloadable PDF Cross Reference Anderton Circlips Downloadable PDF Cross Reference Barden Bearings Downloadable PDF Cross Reference Essentra Downloadable PDF Cross Reference Flocast Downloadable PDF Cross Reference K&S Metals Downloadable PDF Cross Reference McMaster Carr Downloadable PDF Cross Reference Miniature Precison Bearings Downloadable PDF Cross Reference Nordex Downloadable PDF Cross Reference NSK and NTN Downloadable PDF Cross Reference Reid Supply Downloadable PDF Cross Reference SDP-SI Designatronics Downloadable PDF Cross Reference Seeger Circlips Downloadable PDF Cross Reference Small Parts Inc Downloadable PDF Cross Reference Timing Belts and Pulleys Freight Rates and Shipping Times Frequently Asked Questions Games Clearance Google Search Hobby Clearance Hobby Information Large Bearings Mailorder Form Order History Ordering Payment and Shipping Privacy Product Showcase Shipping Rates and Times Technical Terms


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 128567 products in 2218 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 128567 products in 2218 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.