Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Screws Hex Head Steel Zinc Plated Full Thread Categories
Screws Hex Head
Screws - Hex Head - Steel - Zinc Plated - Full Thread
BSW and METRIC - Set Screws
Related Information:
You may also be interested in
Screws Countersunk
Screws - Countersunk - Socket - Steel - Zinc Plated
Flat Head Countersunk UNC - UNF - METRIC
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. Rc38-42. ASTM F835 - alloy steel. ISO 10642.
Related Information:
Screws Cap Head
Screws - Cap - Socket - Zinc Plated
UNC - UNF - METRIC - Alloy Steel.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.
Related Information:
Screws Self Tapping
Screws - Self Tapping - Pan Head - Zinc Plated
Type AB Steel Self Tapping Screws.
Length is from the tip of the screw to the base of the head. Ie, does not include the head.
Screws - Button - Socket - Zinc Plated
UNC - UNF - METRIC.
Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.
Related Information:
Screws - Self Tapping - Countersunk - Philips - Zinc Plated
Countersunk screws length includes head. ie, the full overall length of the screw.
Nuts - Hexagonal - Steel
UNC - UNF - BA - METRIC. Plain and Zinc Plated.
Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.
Knobs - Knurled - Torque - Male
Plastic (high grade gloss black phenolic) or Black ABS Plastic head. Zinc plated steel thread.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Washers - Cup - Steel - Nickel Plated
Countersunk washers for use with screws for decorative finishing
Screws - Captive - Retractable - Steel
Compliance with UL 1950 and EN 60950 codes for access areas. Ratchet mechanism allows screw to be tightened down by hand, but a tool is needed to loosen.Fully retractable captive to the panel and spring ejected.
Press in style. Bright chromate zinc plated, case hardened steel with aluminium knob and stainless steel spring. Knobs available either slotted or no.2 phillips.
Pins - Hammer Drive - Flat Head
Used to replace screws where the need to remove the pin is unlikely.
Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.
Related Information:
Screws - Panel - Jack - Steel
Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.
Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.
Adjusters - Rigid
Adjustable supports for all kinds of machinery.
Mild steel bright zinc plated. Screwdriver cross recess in base. Use as mounting feet.
Related Information:
Screws - Security - Socket - Countersunk - Zinc Plated
Metric only.
Use special tool listed under Screws - Security - Socket - Tools..
Related Information:
Mounts - Anti-Vibration - Zinc Plated Steel
Designed with high grade nitrile rubber and zinc plated steel.
Swivel movement plus or minus 7o for stable support on inclined floors. Nitrile rubber base helps ensure stability.
Related Information:
Pins - Roll - Zinc Plated
Zinc plated spring steel DIN1481.
Also known as sel-lok and bissell pins.
Related Information:
Handles - Latching - 2-Point Locking Rod Kit
Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.
Springs - Drawbar - Zinc Plated
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring.
Related Information:
Studs - Ball - Threaded
Zinc Plated Steel DIN 71803 Form C. Surface Hardened to 55 HRC (Ball (D1) Only - Thread is Not Hardened).
Socket Set Screws - Cup Point - Standard - Zinc Plated - DIN916
Standard grub screws. UNC - UNF - BA - METRIC.
Related Information:
Keysteel Lengths - Rectangular - Zinc Plated
Zinc plated carbon steel key steel
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.
Related Information:
Keysteel Lengths - Square - Zinc Plated
Zinc plated carbon steel key steel
Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled. Zinc plating may be silver or yellow in colour.
Related Information:
Washers - Lock - Split - Steel
Plain and zinc plated
Dimensions are nominal and may vary between batches. Washers designed to be used to help prevent nuts from vibrating loose.
Circlips - External - Standard - Zinc Plated
Imperial and metric DIN471 / D1400 / N1400 / D1460. Retaining rings. Snap Rings (USA).
Zinc plated carbon steel.
Related Information:
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Forged zinc plated carbon steel.
Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Hooks - S - Steel
Low carbon cold drawn steel with zinc plated finish
Any deviations such as angular lifts, shock loads, modifications will result in drastically reduced maximum loads.
Circlips - Internal - Standard - Zinc Plated
Imperial and metric DIN471 and 472 / D1300 / N1300 / Seeger J and JS. Retaining rings. Snap Rings (USA).
Zinc plated carbon steel. Tolerances on request. Standard and heavy duty options.
Related Information:
Washers - Flat - Mild Steel
Also see combined categories:
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
All Non Precision Flat Washers - Metallic
All Flat Washers and Spacers - Metallic
Flat washers. Includes fender washers. Zinc plated and unplated listings.
In most cases the actual washer size will be larger than the nominal ID and smaller than the nominal OD.
Related Information:
Bolts - Eye - Bent Rod - Steel
Not recommended for lifting.
Carbon steel zinc plated. Complete with nut. Rolled threads.
Ball Transfer Units - Spring Loaded - Flanged - Zinc Plated
Single ball bearings units for conveyor systems
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
Ball Transfer Units - Spring Loaded - Unflanged - Zinc Plated
Single ball bearings units for conveyor systems
Case: Zinc plated Mild Steel. Ball: Carbon Steel 60-66 HRC. Applications: - Guillotines - Presses - Moulding machines - Base of machines for easy handling - Press brakes - Shock loading.
Springs - Extension - Stainless Steel
Includes long lengths up to 1 metre
Zinc Plated Spring Steel not recommended for applications exceeding 121 oC (250 Deg F). 302 Stainless springs not recommended for applications exceeding 260 oC (500 Deg F). 302 stainless steel is slightly magnetic.
Related Information:
Pins - Ball Lock - Ball Handle - Plastic Handle
Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins.
Positive lock detent pins. Plastic Handles. 300 Grade Stainless Components. 440C Stainless Balls.
Related Information:
Pins - Ball Lock - T-Handle - Plastic Handle
Quick release. Zinc plated C1144 steel pins with black plastic ball handles and spring loaded balls. Quick alternative to cotter pins. Tee handle.
Positive lock detent pins. Plastic Handles. Carbon steel components.
Related Information:
Rod Ends - Steel - Studded - Nylon Seat - Female
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.
Rod Ends - Steel - Studded - Nylon Seat - Male
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.
Rod Ends - Steel - Studded - PTFE Seat - Female
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated.
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 127000 products in 2359 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
