Small Parts & Bearings - an MBA company

Screws Captive Thumb 303 Stainless Categories


Screws Captive


Screws - Captive - Thumb - 303 Stainless
Screws - Captive - Thumb - 303 Stainless

Also see combined categories:
All Captive Screws

Knurled Head.


You may also be interested in

Screws Thumb


Screws - Thumb - Shoulder
Screws - Thumb - Shoulder

Also see combined categories:
All Thumb Screws

303 Stainless Steel



Knobs Precision


Knobs - Precision - Knurled
Knobs - Precision - Knurled

Also see combined categories:
All Knurled Knobs
All Knobs

Set screw and clamp types - Stainless Steel. Also known as Thumb Knobs.

303 Stainless Steel. ID Tolerance +0.013 / -0.000 mm (+0.0005 / - 0.0000 inch).


Collars


Collars - Shaft - Hinged - Stainless Steel
Collars - Shaft - Hinged - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Hinged Shaft Collars

Precision machined. Convenient easy-to-assemble design. 303 Stainless Steel

Same axial load handling capabilities as standard two piece collars. Captive clamp screw eliminates lost screws. The collars have a smooth I.D., O.D. & sides with no protruding pins or screws. Easily Machinable / Open Completely. Non-marring / Use on hardened shafts / Use on tubing / Use on split hubs.

Related Information:


Screws Thumb


Screws - Thumb - Knurled - Stainless
Screws - Thumb - Knurled  - Stainless

Also see combined categories:
All Thumb Screws

Stainless steel knurled head thumb screws



Screws - Thumb - Knurled - Stainless - Precision Head
Screws - Thumb - Knurled  - Stainless - Precision Head

Also see combined categories:
All Thumb Screws



Screws - Thumb - Knurled - Stainless - Slim Head
Screws - Thumb - Knurled  - Stainless - Slim Head

Also see combined categories:
All Thumb Screws



Screws - Thumb - Knurled - Washer Face - Stainless Steel
Screws - Thumb - Knurled - Washer Face - Stainless Steel

Also see combined categories:
All Thumb Screws

Knurled head stainless steel thumb screws with an integral washer



Screws Captive


Screws - Captive - Retractable - Steel
Screws - Captive - Retractable - Steel

Also see combined categories:
All Captive Screws

Compliance with UL 1950 and EN 60950 codes for access areas. Ratchet mechanism allows screw to be tightened down by hand, but a tool is needed to loosen.Fully retractable captive to the panel and spring ejected.

Press in style. Bright chromate zinc plated, case hardened steel with aluminium knob and stainless steel spring. Knobs available either slotted or no.2 phillips.


Knobs Thumb


Knobs - Thumb - With Cap Screw
Knobs - Thumb - With Cap Screw

Also see combined categories:
All Thumb Knobs
All Knobs

Four types and four colours.

Complete with high tensile alloy steel screw. If stainless steel screws required please order cap screws separately and knobs without screw.


Screws Shoulder


Screws - Shoulder - Socket Head - 303 Stainless
Screws - Shoulder - Socket Head - 303 Stainless

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.


Screws - Shoulder - Slotted Head - Stainless
Screws - Shoulder - Slotted Head - Stainless

Also see combined categories:
All Shoulder Screws

303 Stainless Steel

Also known as stripper bolts.


Screws Cap Head


Screws - Cap - Socket - 303 - 304 Stainless
Screws - Cap - Socket - 303 - 304 Stainless

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:


Screws Panel


Screws - Panel - Stainless
Screws - Panel - Stainless

Also see combined categories:
All Panel Screws

Extra large head. One piece construction. 303 Stainless Steel.



Thread Inserts


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:


Inserts - Self Tapping - For Plastics - Stainless 303
Inserts - Self Tapping - For Plastics - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Use of installation tool recommended. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Use with plastics, light metal alloys or hard wood. Made from 303 stainless steel. Quantity orders can also be supplied in Brass or 316 Stainless.

Related Information:


Collars - Shaft - Standard - Stainless Steel
Collars - Shaft - Standard - Stainless Steel

Also see combined categories:
All Round Bore Shaft Collars
All Standard Shaft Collars

Includes miniature precision types. 303 and 316 Types.

Static torque and axial load are for reference only using steel cup point grub screw on soft steel shaft.

Related Information:


Screws - Pan Head - 303-304 Stainless - Philips
Screws - Pan Head - 303-304 Stainless - Philips

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 303-304 Stainless - Pozidrive
Screws - Pan Head - 303-304 Stainless - Pozidrive

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 303-304 Stainless - Slotted
Screws - Pan Head - 303-304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Universal Joints - Single Joint - High Speed - Plain Bore - Stainless
Universal Joints - Single Joint - High Speed - Plain Bore - Stainless

Also see combined categories:
All Universal Joints
All Single Joint Universals

303 Stainless Body with 440 Stainless Balls. Maximum operating angle 30 degrees (45 for hand operated applications). Zero backlash. Sealed lubrication. Light weight and low inertia. Not supplied with set screws or tapped holes.


Related Information:


Gears - Spur - 24DP - 20 Degree - Stainless
Gears - Spur -  24DP - 20 Degree - Stainless

Also see combined categories:
All 24DP Spur Gears 20 Degree
All 24DP Spur Gears 20 Degree Metal

PCD = No. of Teeth x 1.058mm (1/24 in.). 20o Pressure Angle. 303 Stainless Steel. DP stands for Diametrical Pitch and is an imperial measurement system. Clamping and grub screw type.

Plastic and metallic. FairlocTM Hub Type require controlled shaft tolerances between 0.0025 and 0.0203 mm Clearance. 24 Diametrical Pitch. Approx 3.33mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Couplings - Bellows - Set Screw - 316 Stainless
Couplings - Bellows - Set Screw - 316 Stainless

Also see combined categories:
All Bellows Couplings

Zero Backlash - High Torsional Stiffness - Identical Clockwise and Anticlockwise Characteristics

Stainless Steel 303L Bellows. Stainless Steel 316 Hubs.

Related Information:


Screws - Shoulder - Socket Head - 416 Stainless
Screws - Shoulder - Socket Head - 416 Stainless

Also see combined categories:
All Shoulder Screws

Also known as stripper bolts.


Screws - Countersunk - Stainless - Pozidrive
Screws - Countersunk - Stainless - Pozidrive

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric small selection only.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Button - Torx - Stainless
Screws - Button - Torx - Stainless

Also see combined categories:
All Machine Screws

UNC - UNF

Nuts sold seperately - See Nuts.

Related Information:




Screws - Countersunk - 304 Stainless - Philips
Screws - Countersunk - 304 Stainless - Philips

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Countersunk - 304 Stainless - Slotted
Screws - Countersunk - 304 Stainless - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Countersunk - 316 Stainless - Philips
Screws - Countersunk - 316 Stainless - Philips

Also see combined categories:
All Machine Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Countersunk - 316 Stainless - Slotted
Screws - Countersunk - 316 Stainless - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC.

Nuts sold seperately - See Nuts.

Related Information:


Nuts - Thumb - Collared - Stainless
Nuts - Thumb - Collared - Stainless

Also see combined categories:
All Nuts
All Thumb Nuts



Screws - Button - Socket - 304 Stainless
Screws - Button - Socket - 304 Stainless

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:


Screws - Button - Socket - 316 Stainless
Screws - Button - Socket - 316 Stainless

Also see combined categories:
All Machine Screws
All Socket Button Screws

UNC - UNF - METRIC.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7380.

Related Information:


Screws - Cap - Socket - 316 Stainless
Screws - Cap - Socket - 316 Stainless

Also see combined categories:
All Machine Screws
All Socket Cap Screws

UNC - UNF - METRIC - Stainless Steel.

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN912.

Related Information:


Screws - Fillister Head - 304 Stainless - Philips
Screws - Fillister Head - 304 Stainless - Philips

Also see combined categories:
All Machine Screws

UNC Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Fillister Head - 304 Stainless - Slotted
Screws - Fillister Head - 304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric - UNC - UNF

Nuts sold seperately - See Nuts. DIN 84.

Related Information:


Screws - Fillister Head - 316 Stainless - Slotted
Screws - Fillister Head - 316 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric - UNC - UNF

Nuts sold seperately - See Nuts. DIN 84.

Related Information:


Screws - Countersunk - Socket - 304 Stainless
Screws - Countersunk - Socket - 304 Stainless

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:


Screws - Countersunk - Socket - 316 Stainless
Screws - Countersunk - Socket - 316 Stainless

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk UNC - UNF - METRIC - Stainless Steel

Imperial Sizes to ANSI B18.3. Metric Sizes to DIN7991. ISO 10642.

Related Information:


Screws - Hex Head - 304 Stainless
Screws - Hex Head - 304 Stainless

Also see combined categories:
All Machine Screws

Metric - UNF - UNC

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 316 Stainless - Philips
Screws - Pan Head - 316 Stainless - Philips

Also see combined categories:
All Machine Screws

Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Pan Head - 316 Stainless - Pozidrive
Screws - Pan Head - 316 Stainless - Pozidrive

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Round Head - 304 Stainless - Slotted
Screws - Round Head - 304 Stainless - Slotted

Also see combined categories:
All Machine Screws

Metric Only

Nuts sold seperately - See Nuts.

Related Information:


Screws - Security - Socket - Countersunk - Stainless
Screws - Security - Socket - Countersunk - Stainless

Also see combined categories:
All Security Screws

Metric only.

Use special tool listed under Screws - Security - Socket - Tools..

Related Information:


Screws - Cap - Socket - 18-8 Stainless Steel - Nylon Tipped
Screws - Cap - Socket - 18-8 Stainless Steel - Nylon Tipped

Also see combined categories:
All Socket Cap Screws
All Soft Tipped Grub Screws

Nylon tipped socket cap screws in 18-8 Stainless Steel - similar to 316 stainless



Screws - Low Head - Socket - 316L Stainless
Screws - Low Head - Socket - 316L Stainless

Also see combined categories:
All Machine Screws
All Socket Cap Screws

316L Stainless Steel. Other sizes available on request.

Hexagon socket cap head with low head. Safety improvements and compact size for equipment and devices. May be used in vacuum chamber applications in clean rooms, Flat Panel Displays, Semiconductor production equipment and devices. All clean washed, preventing the inclusion of oil and foreign particles.


Screws - Countersunk - Oval Top - 304 Stainless - Philips
Screws - Countersunk - Oval Top - 304 Stainless - Philips

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Countersunk - Oval Top - 304 Stainless - Slotted
Screws - Countersunk - Oval Top - 304 Stainless - Slotted

Also see combined categories:
All Countersunk Screws

Flat Head Countersunk. Metric only.

Nuts sold seperately - See Nuts.

Related Information:


Screws - Shoulder - Slotted Shallow Head - Stainless
Screws - Shoulder - Slotted Shallow Head - Stainless

Also see combined categories:
All Shoulder Screws



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 125482 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 125482 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.