Small Parts & Bearings - an MBA company

Covid-19 Update!! Current supply status.

Trading by online order and email.
Outbound Deliveries: Allow a few extra days for both Australian and overseas deliveries.
Pre-orders and Backorders: Allow a few extra days due to quarantine precautions.

S3PP FAFNIR


Cross Referenced Part Numbers



R6A-2RSMC3 FAFNIR part number S3PP





ID (d): 9.525. OD (D): 22.225. Width (B): 7.142.

Online Price: 0.00     
Stock: 12     


Category Matches

Chain and Sprockets Roller


Sprockets - 3.12 x 1.47mm - Simplex - Plastic
Sprockets -  3.12 x 1.47mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 3.12mm miniature plastic chain.

Related Information:


Sprockets - 3.75 x 1.6mm - Simplex - Plastic
Sprockets -  3.75 x 1.6mm - Simplex - Plastic

Also see combined categories:
All Sprockets for Roller Chain

Nylon - Acetal - With and without bore inserts.

Match with series 3.75mm miniature plastic or stainless chain.

Related Information:


Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore
Sprockets -  3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore

Also see combined categories:
All Sprockets for Roller Chain

Miniature 3.75mm Pitch.

Match with 3.75mm simplex chain. For easy ready selected sets of chain and sprockets please see the HES website.

Related Information:


Belts Timing GT2 3mm


Belts - Timing - 3.000mm Pitch - GT2 - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT2 -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT2 -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.14mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 15mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 6mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - GT2 - Double Sided - 9mm Wide
Belts - Timing -  3.000mm Pitch - GT2 - Double Sided -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

GT2 Series Metric Timing Belts Double Sided

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts Timing HTD 3mm


Belts - Timing - 3.000mm Pitch - HTD - 15mm Wide
Belts - Timing -  3.000mm Pitch - HTD - 15mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD - 6mm Wide
Belts - Timing -  3.000mm Pitch - HTD -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD - 9mm Wide
Belts - Timing -  3.000mm Pitch - HTD -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD Double Sided - 6mm Wide
Belts - Timing -  3.000mm Pitch - HTD Double Sided -  6mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts Double Sided.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 3.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts - Timing - 3.000mm Pitch - HTD Double Sided - 9mm Wide
Belts - Timing -  3.000mm Pitch - HTD Double Sided -  9mm Wide

Also see combined categories:
All 3mm Pitch Timing Belts

HTD Series Metric Timing Belts.

Pitch (P) - 3.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.22mm. Belt Height (W) - 2.41mm. Breaking strength is not indicative of working strength.

Related Information:


Pulleys Timing GT2 3mm


Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 - 15mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide.

Aluminium Alloy. Finsihed through bore. Set screw locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 -  6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide.

Aluminium Alloy. Finished through bore ready to assemble.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Insert
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - Plastic - Insert

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.


Related Information:




Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - GT2 -  9mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.

Finished through bore ready for assembly. Set screw locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - GT2 - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys Timing HTD 3mm


Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - EZ-Lock
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - EZ-Lock

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.


Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 6mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 6mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Hubless

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Moulded single or double flange. No hub.

Suitable for use with shaftloc sleeves.

Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Plastic - Insert

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.


Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - 9mm Wide - Through Bore
Pulleys - Timing -  3.000mm Pitch - HTD - 9mm Wide - Through Bore

Also see combined categories:
All 3mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit HTD 3.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy. Finished through bore ready to assemble. Set screw locking.

Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Aluminium

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Carbon Steel
Pulleys - Timing -  3.000mm Pitch - HTD - STOCK - Carbon Steel

Also see combined categories:
All 3mm Pitch Timing Pulley Stock

For manufacture of timing pulleys or applications requiring multiple belts from a single drive.


Related Information:


Dampers


Dampers - Rotary - 2.0 to 3.0 Ncm
Dampers - Rotary -  2.0 to 3.0 Ncm

Also see combined categories:
All Dampers

Rotary dampers enable products to function with a smooth mechanical motion. Prevent lid and access panel closure damage.

Body: Polycarbonate / Gear: Polyacetal. Fluid: Silicone. Temp range 0 to 50 oC.


Belts Posi-Drive


Belts - Posi-Drive - 3.75 mm Circular Pitch - Double Core
Belts - Posi-Drive - 3.75 mm Circular Pitch - Double Core

Also see combined categories:
All Posi-Drive Belts

Same as US 0.1475 Pitch - Use with Posi-Drive Sprockets.

Use Double Core with Posi-Drive Sprockets. 3.746mm Circular Pitch. Same as US 0.1475 Pitch. Posi-drive material lengths in this category can not be joined by the customer as special equipment is required. Material lengths are used in reciprocating applications and not meant to be joined.

Related Information:


Belts Timing 40DP LT Pitch


Belts - Timing - 2.073mm Pitch - 40DP - 3.2mm Wide
Belts - Timing -  2.073mm Pitch - 40DP - 3.2mm Wide

Also see combined categories:
All 40DP 2.073mm Pitch Timing Belts

Standard Series Timing Belts 2.072mm or 0.0816 inch pitch. Also known as LT.

Pitch (P) - 2.073mm (0.0816 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.60mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.20mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.

Related Information:


Belts Timing MXL Pitch


Belts - Timing - 2.032mm Pitch - MXL - 3.2mm Wide
Belts - Timing -  2.032mm Pitch - MXL -  3.2mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

Standard Series Timing Belts 2.032mm or 0.080 inch pitch. 3.18mm (1/8 inch) widths +/- 0.2mm

Pitch (P) - 2.032mm (0.08 inch). Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 0.76mm. Tooth Height (H) - 0.46mm. Belt Height (W) - 1.14mm - Corner Radii ( r ) - 0.13mm. Breaking strength is not indicative of working strength.

Related Information:


Pulleys Timing MXL Pitch


Pulleys - Timing - 2.032mm Pitch - MXL - 3.2mm Wide - Through Bore
Pulleys - Timing -  2.032mm Pitch - MXL - 3.2mm Wide - Through Bore

Also see combined categories:
All MXL 2.032mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 3.0 to 3.2mm wide.

2.032mm metric is equivalent to 0.080 pitch imperial.

Related Information:


Motors DC


Motors - DC 8.0X10.0 mm
Motors - DC 8.0X10.0 mm

Also see combined categories:
All DC Motors

3.5V - 20500 RPM


Related Information:


Belts Timing MXL Pitch


Belts - Timing - 2.032mm Pitch - MXL - Clean - 3.2mm Wide
Belts - Timing -  2.032mm Pitch - MXL - Clean - 3.2mm Wide

Also see combined categories:
All MXL 2.032mm Pitch Timing Belts

PowerGrip(R) TruMotion(R) Timing Belts in 2.032mm or 0.080 inch pitch.

The TruMotion(R) belt construction utilizes a cream-colored polymer compound reinforced with fiberglass tensile cord and a clean polymer-free nylon tooth facing. The belt can withstand high and low temperature ranges of -40oC to +90oC, has a virtually dust-free operation and is non-marking. The belt also has a high flex life and resistance to elongation. TruMotion(R) belts have a durable wear surface for longer life and are RoHS compliant. Breaking strength is not indicative of working strength. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. RoHs comliant.

Related Information:


You may also be interested in

Gears Metric Spiral Mitre


Gears - Mitre - Spiral - Module 3.5 - Steel
Gears - Mitre - Spiral - Module 3.5 - Steel

Also see combined categories:
All Metric Mitre Gears
All Metric Spiral Mitre Gears

1:1 Ratio. 20o Pressure Angle - 35o Spiral tooth - Steel.

A set of spiral mitre gears must be identical in module and number of teeth but opposite in spiral direction. This provides a 1:1 ratio on a 90o angle. See Gears - Bevel for other ratios. For easy ready selected sets of 90o gears please see the HES website.

Related Information:


Pulleys Flanges


Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm GT2 Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:


Flanges - Timing Pulley - Suit 3.000mm GT2 Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm GT2 Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Aluminium
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Aluminium

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:


Flanges - Timing Pulley - Suit 3.000mm HTD Series - Carbon Steel
Flanges - Timing Pulley - Suit  3.000mm HTD Series - Carbon Steel

Also see combined categories:
All Timing Pulley Flanges

Use with timing pulley stock to custom make your own pulleys


Related Information:


Motors DC


Motors - DC 23.8X30.6 mm
Motors - DC 23.8X30.6 mm

Also see combined categories:
All DC Motors

12 VDC - 12,300 RPM unloaded at 4.5 volts


Related Information:


Motors - DC 26.9X23.8 mm
Motors - DC 26.9X23.8 mm

Also see combined categories:
All DC Motors

M-26 Series 1.5 to 24 VDC - 2500 to 15100 RPM.

See Datasheets in PDF format. Link at bottom of this page. Direction of rotation (CW = Clockwise, ACW = Anticlockwise) when looking towards shaft.

Related Information:


Vee Belts


Belts - Vee - 22.2 x 13.5mm - Notched CX
Belts - Vee - 22.2 x 13.5mm - Notched CX

Also see combined categories:
All Vee Belts 22mm and 22.2mm Top Width

22.2mm Top Width x 13.5mm Height.


Related Information:


Belts - Wedge - 15.9 x 13.5mm - Notched 5VX
Belts - Wedge - 15.9 x 13.5mm - Notched 5VX

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

15.9mm Top Width x 13.5mm Height.


Related Information:


Belts - Wedge - 16.3 x 13.0mm - SPB - 5V
Belts - Wedge - 16.3 x 13.0mm - SPB - 5V

Also see combined categories:
All Vee Belts 15.9mm and 16.5mm Top Width

16.3mm Top Width x 13.0mm Height.

Sizes are nominal and may vary slightly.

Related Information:


Gears Inch Spur


Gears - Spur - 8DP - 14.5 Degree - Steel
Gears - Spur -   8DP - 14.5 Degree - Steel

Also see combined categories:
All 8DP Spur Gears

PCD = No. of Teeth x 3.175mm (1/8 in.). 14.5o Pressure Angle. Steel. DP stands for Diametrical Pitch and is an imperial measurement system.

Metallic. 8 Diametrical Pitch. Approx 9.98mm between teeth. For easy ready selected sets of rack and gear please see the HES website.

Related Information:


Keys and Keysteel


Keys - Gib Head - Steel
Keys - Gib Head - Steel

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).

Related Information:


Keys - Gib Head - Zinc Plated
Keys - Gib Head - Zinc Plated

Also see combined categories:
All Gib Head Keys

Tapered 3.000 mm per 300 mm (1:100).

Related Information:


Balls Ceramic


Balls - Ceramic - Sapphire - Synthetic
Balls - Ceramic - Sapphire - Synthetic

Also see combined categories:
All Ceramic Balls
All Non Metallic Balls

Extreme hardness, wear resistance, non-corrosiveness and chemical inertness.

Tolerances available on request. Specific Gravity: 3.98. Grade 25. Extreme hardness, wear resistance, non-corrosiveness and chemical inertness. High mechanical strength. Transparent (refractive index 1.76).

Related Information:


Cable


Attachments - Eyes - Synchromesh
Attachments - Eyes - Synchromesh

Also see combined categories:
All Synchromesh Attachments

Use with synchromesh or standard miniature cable

Recommended dimensions after crimping:. 1.05 Cable - A=2.59. 2.06 Cable - A=2.64. 2.60 Cable - A=2.72. 3.40 Cable - A=2.80 (3.40 Cable must have outer helical wire removed prior to crimping).

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126914 products in 2518 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 126914 products in 2518 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.