Rod Ends Ptfe Lined Categories
Rod Ends - Steel - PTFE Lined - Tempered Steel Female
Imperial and Metric. Forged tempered steel. Rolled thread. Surface galvanised. Also known as Heim Joints. Nylon - ptfe - glass compound race.
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tempered Steel Female.
Rod Ends - Steel - PTFE Lined - Tempered Steel Male
Imperial and Metric. Forged tempered steel. Rolled thread. Surface galvanised. Also known as Heim Joints. Nylon - ptfe - glass compound race.
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tempered Steel Male.
Rod Ends - Steel - PTFE Lined - Tight Fit Female
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tight Fit Female.
Rod Ends - Steel - PTFE Lined - Tight Fit Male
Imperial and Metric. Tight fit (Minimal ball clearance) / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - PTFE Lined - Tight Fit Male.
Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female
Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination. Also known as Heim Joints
Maintenance free and no lubrication necessary. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Female.
Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male
Bearing Steel, hardened, ground and chromium plated Inner ring, Heavy duty bronze with embedded bronze - PTFE fabric Outter ring. Steel/Bronze - PTFE fabric Sliding Combination.
Maintenance free and no lubrication necessary. Also known as Heim Joints. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined - Ferrobal Narrow Head Male.
Rod Ends - Steel - Bronze Lined Female
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined Female.
Rod Ends - Steel - Bronze Lined Male
Imperial and Metric / Carbon Steel. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Steel - Bronze Lined Male.
Rod Ends - Stainless Steel - Bronze Lined Male
Also known as Heim Joints
Dimensions not shown are available on request. CFF.SS series are made to DIN 648K and ISO 6126JK. This category may be available in the new MBA online store at Rod Ends - Stainless Steel - Bronze Lined Male.
Rod Ends - Stainless Steel 304 with 420 Ball - Bronze Lined Female
Also known as Heim Joints
Dimensions not shown are available on request.
Rod Ends - Steel - Studded - Nylon Seat Female
Housing is plated and dichromate treated steel. Ball is case hardened and plated. Stud is permanently affixed and made from heat treated alloy steel, zinc plated. This category may be available in the new MBA online store at Rod Ends - Steel - Studded - Nylon Seat Female.
Rod Ends - Plastic Female
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Plastic Female.
Rod Ends - Plastic Male
Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints
Dimensions not shown are available on request. This category may be available in the new MBA online store at Rod Ends - Plastic Male.
Rod Ends - Steel - Stamped Female
Economy stamped style combines high strength with low cost. Also known as Heim Joints
Made from low carbon steel and plated for corrosion resistance. Ball is case hardened. This category may be available in the new MBA online store at Rod Ends - Steel - Stamped Female.
Rod Ends - Steel - Nylon Raceway Female
Also known as Heim Joints
This category may be available in the new MBA online store at Rod Ends - Steel - Nylon Raceway Female.
Rod Ends - Steel - Nylon Raceway Male
Also known as Heim Joints
This category may be available in the new MBA online store at Rod Ends - Steel - Nylon Raceway Male.
Balls - Bored - Steel
Bored steel balls as used in steel rod ends.
Hardness: 58-64 Rc. Material: SUJ-2. This category may be available in the new MBA online store at Balls - Bored - Steel.
Related Information:
Balls - Plastic - Bored
Bored acetal balls as used in plastic rod ends.
Maintenance Free - Self Lubricating. Corrosion Resistant Iglidur W300 material. Suitable for rotating, oscillating and linear movement. Lightweight. This category may be available in the new MBA online store at Balls - Plastic - Bored.
Related Information:
Bungs and Caps - Reversible - Round
Tapered plastic bungs fit inside round tube or over the outside ends of rod, tube or shafting.
Can be used on threaded or unthreaded parts. Used as tuning bungs or rod tips. Helps prevent damage to the product ends. Helps prevent injury from sharp edges. This category may be available in the new MBA online store at Bungs and Caps - Reversible - Round.
Related Information:
Hexagonal Bar - Brass
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Small A/F sizes may not be perfectly straight. This category may be available in the new MBA online store at Hexagonal Bar - Brass.
Square Bar - Brass
Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight. This category may be available in the new MBA online store at Square Bar - Brass.
Hexagonal Bar - Carbon Steel
Saw Cut Ends. Small A/F sizes may not be perfectly straight. This category may be available in the new MBA online store at Hexagonal Bar - Carbon Steel.
Hexagonal Bar - Titanium Ti-Gr2 - Rolled
Cold rolled hex bar to ASTM B348
Saw Cut Ends. This category may be available in the new MBA online store at Hexagonal Bar - Titanium Ti-Gr2 - Rolled.
Hexagonal Bar - Titanium Ti-Gr2 - Drawn
Cold rolled and hot drawn hex bar to ASTM B348
Saw Cut Ends. This category may be available in the new MBA online store at Hexagonal Bar - Titanium Ti-Gr2 - Drawn.
Washers - Flat - PTFE - Precision Shim
Also see combined categories:
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
All Non Precision Flat Washers - Non Metallic
All Flat Washers and Spacers - Non Metallic
Teflon Washers
This category may be available in the new MBA online store at Washers - Flat - PTFE - Precision Shim.
Related Information:
Bearings - Linear Sliding - Stainless - PTFE - Closed
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000. This category may be available in the new MBA online store at Bearings - Linear Sliding - Stainless - PTFE - Closed.
Bearings - Linear Sliding - Stainless - PTFE - Open
Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.
Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000. This category may be available in the new MBA online store at Bearings - Linear Sliding - Stainless - PTFE - Open.
Tape - Fiberglass - PTFE Coated
Heat Sealer Tape
Non stick ptfe tape is resistant to abrasion, high temperature and chemicals. Commonly used on heatsealing machines, mould protection, packaging, automotive and electrical applications. Temperature range minus 73 oC to 260 oC (-100 to 500 Deg F). Less than 5 percent elongation. This category may be available in the new MBA online store at Tape - Fiberglass - PTFE Coated.
Balls - Plastic - PTFE
No water absorption. Temperatures up to 288 Deg C.
Tolerances available on request. Not affected by any known acids or alkalies. No water absorption. Temperatures up to 288 oC. Unpolished. Specific Gravity: 2.3.
Related Information:
Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp
Low profile self aligning flange mounted high temperature PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - PTFE Bronze - High Temp.
Related Information:
Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp
Low profile self aligning flange mounted low temperature PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - PTFE Bronze - Low Temp.
Related Information:
Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard
Low profile self aligning flange mounted PTFE bronze bearings
See links at bottom of web page for more information. +/- 5% Static Alignment. This category may be available in the new MBA online store at Housings - Flange Mount - Self Aligning - PTFE Bronze - Standard.
Related Information:
Bushes - Split - Stainless Steel and PTFE - Flanged
Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.
Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.
Related Information:
Bushes - Split - Stainless Steel and PTFE - Unflanged
Oil, acid, alkali and salt water resistant. Contains no lead. Particularly suited to food applications, flow meters and pumps in pharmaceutical applications, printing machines chemical engineering and seawater applications.
Operating Temperature -200o to 280o Celsuis. PTFE with oilfibre 0.01 to around 0.03mm. Porous bronze 0.2 to around 0.3mm. Stainless steel backing 0.7 to around 2.3mm. 140 N/mm2 dynamic load rating. 250 N/mm2 static. 60 N/mm2 Oscillating. Speed Limit in oil 4.5 metres surface speed per second.
Related Information:
Bushes - Split - Steel - DU - Flanged
Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.
Operating Temperature -200o to 280o Celsuis. Maximum Load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.
Related Information:
Bushes - Split - Steel - DU - Unflanged
Composite bearing material conisting of 3 bonded layers; Steel backing bonded with porous sintered bronze interlayer which is impregnated and overlaid with polytetrafluroethylene (PTFE). Lead free.
Operating Temperature -200o to 280o Celsius. Maximum load 250N/mm2. Requires No lubrication, provides maintenance free operation. Exhibits low wear rate, Seizure resistant. High Static and Dynamic Load capacity, Good frictional properties with negligible stick-slip. Resists Solvents, Compact and light. No water Absorption, Electrically conductive and shows no electrostatic effects, Good embedability and is tolerant of dusty environments. Good embedability and is tolerant of dusty environments. Speed Limit in oil 5 metres surface speed per second.
Related Information:
Bearings - Angular Contact - Single Row Ball - Ceramic ZRO2
Excellent performance in electrical and magnetism sensitive applications. Full ceramic zirconia.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.
Related Information:
Snap Buttons - Double End
Fasteners for telescoping tubing help reduce assembly time whilst improving your product functionality. Also called button clips or spring buttons.
Eliminates the need for rivets and screws. Simply snap into place in square or round tubing. Made from 1050 heat treated spring steel with minimum 0.005mm (0.0002 inch) zinc plating. This category may be available in the new MBA online store at Snap Buttons - Double End.
Yoke Ends - Blank
Linkage Connectors with blank ends - no hole
Drop forged steel machined to SAE standards. Also see clevis joints. This category may be available in the new MBA online store at Yoke Ends - Blank.
Related Information:
Yoke Ends - Threaded
Linkage Connectors
Drop forged steel machined to SAE standards. Also see clevis joints. This category may be available in the new MBA online store at Yoke Ends - Threaded.
Related Information:
Shafts - Flexible - Coupling Ends - Open - Mild Steel
Flexible shafting with coupling ends ready to attach to a fixed shaft.
1.7 and 2.5mm cable diameters can be operated manually at 62mm bend radius with torsional break strength of 0.62 N.m. 3.3F shaft has a greater degree of flexibility than standard 3.3mm. 3.3F shaft can be used in dynamic mode if shaft isshortened to approximately 50mm. This category may be available in the new MBA online store at Shafts - Flexible - Coupling Ends - Open - Mild Steel.
Related Information:
Bearings - Double Row Ball - Self Aligning - Ceramic ZrO2
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Lubrication and maintenance free. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.
Related Information:
Bearings - Single Row Ball Unflanged - Standard - Ceramic ZrO2
Excellent performance in electrical and magnetism sensitive applications. Not for High Speed. Full ceramic zirconia.
Applications include cryopumps, medical applications, semiconductors, turbine flow meters, food processing, robotics and optics. Wear and corrosion resistance. Depending on the application, these bearings may run lubrication free or lubricated by the medium in which they are submerged. Cages of PTFE or Glass Fibre Reinforced Nylon. Can be made from special aviation aluminum on request. ZrO2 standard material for balls and rings. Si3N4 available to special order. High and low- temperature application. Up to 250 Deg C with PTFE Cage and 130 Deg C with Nylon Cage. Up to 1000 deg C without a cage or seals.
Related Information:
Rod - Round - Aluminium
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
Rod - Round - Brass
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
Rod - Round - Copper
For general hobby applications.
NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Related Information:
Rod - Round - Sintered Bronze
Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.
Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.
Related Information:
Rod - Round - Soft Metal Packs
For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,
300mm lengths for general hobby applications. Not recommended for heavy duty applications. This product is not recommended for use as a bearing shaft. We suggest you use items from the category - Shafting - Ground for bearing shaft. Includes K&S Metals range and more.
Main Pages
About Us
Acetal Bearings PDF
ADR and SKF PDF
Anderton Circlips Cross Reference PDF
Ball Lock Pins PDF
Balls List
Balls PDF
Barden Bearings Cross Reference PDF
Bearings List
Brands
Ceramic Bearings PDF
Circlips PDF
Clearance Items List
Clevis Pins PDF
Contact Us
Corrosion Resistant Bearings PDF
Dental Bearings
Disc Springs PDF
Dowel Pins PDF
Dowel Pins
Economy Bearings PDF
Essentra Cross Reference PDF
Flocast Cross Reference PDF
Freight Rates and Shipping Times
Frequently Asked Questions
General Information about MBA
Hammer Drive Pins PDF
High Speed Bearings PDF
Hobby Clearance
Hobby Information
K&S Metals Cross Reference PDF
Key Steel PDF
Knobs PDF
Large Bearings
Leveling Mounts PDF
Mailorder Form
Metallic Bushes PDF
Miniature Precison Bearings Cross Reference PDF
Miscellaneous Brands Cross Reference PDF
Nordex Cross Reference PDF
NSK and NTN Cross Reference PDF
Ondrives Cross Reference PDF
O-Rings PDF
Pins PDF
Plastic Bearings PDF
Polyvee Belts and Pulleys PDF
Precision Shim Washers PDF
Privacy
Push On and Push In Rings PDF
Reid Supply Cross Reference PDF
Rod & Tube PDF
Roll Pins PDF
Screws PDF
SDP-SI Designatronics Cross Reference PDF
Seeger Circlips Cross Reference PDF
Shaft Collars PDF
Shim Sheet PDF
Shoulder Screws PDF
Sintered Bronze Bushes PDF
Sintered Bronze Cross Reference PDF
Small Bearings
Small Parts Inc Cross Reference PDF
Snap Rings PDF
Socket Set Screws PDF
Solid Bronze Bushes PDF
Spring Steel Strip PDF
Springs PDF
Standard Ball Bearing Range PDF
Super Precision Bearings PDF
Taper Pins PDF
Technical Information
Terms
Thrust Bearings PDF
Thumb Screws and Nuts PDF
Timing Belts and Pulleys Cross Reference PDF
Timing Belts PDF
Timing Pulley Stock PDF
Timing Pulleys PDF
Vibration Mounts PDF
Washers and Spacers PDF
Wave Washers PDF
Domains
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 153564 products in 2095 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
