Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Pulleys Timing T2.5 2.5mm Categories
Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 2.500mm Pitch - T2.5 - 6mm Wide - Through Bore
Timing Pulleys to suit T Series 2.500mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide.
Aluminium Alloy. Finished through bore ready to assemble. Set screw locking.
Related Information:
You may also be interested in
Belts Timing T2.5 2.5mm
Belts - Timing - 2.500mm Pitch - T2.5 - 10mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 2.500mm Pitch - T2.5 - 12mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 2.500mm Pitch - T2.5 - 18mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 2.500mm Pitch - T2.5 - 4mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 2.500mm Pitch - T2.5 - 6mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
Belts - Timing - 2.500mm Pitch - T2.5 - 8mm Wide
T Series Metric Timing Belts.
Pitch (P) - 2.500mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Length (T) - 1.50mm. Tooth Height (H) - 0.70mm. Belt Height (W) - 1.30mm - Corner Radii ( r ) - 0.20mm. Breaking strength is not indicative of working strength.
Related Information:
Pulleys Flanges
Flanges - Timing Pulley - Suit 2.500mm T2.5 Series - Aluminium
Use with timing pulley stock to custom make your own pulleys
Related Information:
Pulleys - Timing - Idler
Complete with Needle Roller Bearing.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Related Information:
Pulleys - Timing - 2.073mm Pitch - 40DP - 4.8mm Wide - Through Bore
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 4.7 to 4.8mm wide. Also known as LT.
Aluminium Alloy. Finished Through Bore Ready To Assemble.
Related Information:
Pulleys - Timing - 2.073mm Pitch - 40DP - 6.4mm Wide - Plastic - Plain
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 6.0 to 6.4mm wide. Also known as LT. Moulded single or double flange. No locking device.
Related Information:
Pulleys - Timing - 2.073mm Pitch - 40DP - 7.9mm Wide - Through Bore
Timing Pulleys to suit 40DP 2.070mm Pitch Timing Belts. Suits belts 7.9 to 8.0mm wide. Also known as LT.
Aluminium Alloy. Finished Through Bore Ready To Assemble.
Related Information:
Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
HTD 5mm series Flanges can be used with this stock.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 115mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 170mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 40mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock
Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 55mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 2.000mm Pitch - GT2 - 3mm Wide - Through Bore
Timing Pulleys to suit GT 2mm Pitch Timing Belts.
Aluminium Alloy. Finished Bores with Set Screws.
Related Information:
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - EZ-Lock
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.
Aluminium Alloy. EZI-LOK Hub Clamps together wit a Socket Head Cap Screw. Socket Cap Screw is Supplied with Pulley.
Related Information:
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Insert
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.
Related Information:
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Plastic - Plain
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. No locking device.
Related Information:
Pulleys - Timing - 2.000mm Pitch - GT2 - 6mm Wide - Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide.
Aluminium Alloy. Set Screw and EZI-LOK Hubs.
Related Information:
Pulleys - Timing - 2.000mm Pitch - GT2 - 9mm Wide - Through Bore
Timing Pulleys to suit 2mm Pitch GT Timing Belts 9mm Wide.
Aluminium Alloy. Set Screw Locking.
Related Information:
Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - 304 Stainless
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide.
Aluminium Alloy. Finsihed through bore. Set screw locking.
Related Information:
Pulleys - Timing - 3.000mm Pitch - GT2 - 6mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 6mm Wide.
Aluminium Alloy. Finished through bore ready to assemble.
Related Information:
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - EZ-Lock
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.
Aluminium Alloy. EZ-Lock hub clamps to the shaft with a socket head cap screw. Cap screw is supplied with the pulley.
Related Information:
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Insert
Timing Pulleys to suit 2mm Pitch GT Timing Belts 6mm Wide. Brass insert.
Related Information:
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Plastic - Plain
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide. No locking device.
Related Information:
Pulleys - Timing - 3.000mm Pitch - GT2 - 9mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 9mm Wide.
Finished through bore ready for assembly. Set screw locking.
Related Information:
Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Aluminium, steel and cast iron.
Black oxide coated steel with unfinished bores. Unfinished types requires drilling and tapping. Bore requires machining to finished size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 126999 products in 2361 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
