Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Pulleys Timing At5 5mm Categories
Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
HTD 5mm series Flanges can be used with this stock.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
You may also be interested in
Belts Timing AT5 5mm
Belts - Timing - 5.000mm Pitch - AT5 - 10mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
Belts - Timing - 5.000mm Pitch - AT5 - 12mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
Belts - Timing - 5.000mm Pitch - AT5 - 16mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
Belts - Timing - 5.000mm Pitch - AT5 - 20mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
Belts - Timing - 5.000mm Pitch - AT5 - 25mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
Belts - Timing - 5.000mm Pitch - AT5 - 6mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
Belts - Timing - 5.000mm Pitch - AT5 - 8mm Wide
AT Synchroflex Generation III Series Metric Timing Belts.
Pitch (P) - 5.000mm. Belts working load should be rated at approximately 1/15th of their ultimate breaking strength. Tooth Height (H) - 1.20mm. Belt Height (W) - 2.70mm - Corner Radii ( r )- 0.60mm.
Related Information:
Pulleys Timing GT2 5mm
Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing HTD 5mm
Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing T5 5mm
Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing GT2 5mm
Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing HTD 5mm
Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing GT2 5mm
Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Aluminium, steel and cast iron.
Black oxide coated steel with unfinished bores. Unfinished types requires drilling and tapping. Bore requires machining to finished size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron.
Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores.
Related Information:
Pulleys Timing HTD 5mm
Pulleys - Timing - 5.000mm Pitch - HTD - 15mm Wide - Through Bore
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.
Aluminium Alloy. Finished bore with set screw locking.
Related Information:
Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Fairloc Hub
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Fairloc locking hub.
Related Information:
Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Plastic - Plain
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. No locking device.
Related Information:
Pulleys - Timing - 5.000mm Pitch - HTD - 9mm Wide - Through Bore
Timing Pulleys to suit HTD 5.000mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Related Information:
Pulleys Timing T5 5mm
Pulleys - Timing - 5.000mm Pitch - T5 - 10mm Wide - Through Bore
Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 9.5 to 10.0mm wide.
Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.
Related Information:
Pulleys - Timing - 5.000mm Pitch - T5 - 16mm Wide - Through Bore
Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 15.0 to 16.0mm wide.
Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.
Related Information:
Pulleys - Timing - 5.000mm Pitch - T5 - 25mm Wide - Through Bore
Timing Pulleys to suit T Series 5.000mm Pitch Timing Belts. Suits belts 25.0mm to 25.4mm wide.
Aluminium alloy. No locking provided. You will need to drill and tap the hub to suit your desired grub screw. Tapped hubs can be provided on request.
Related Information:
Pulleys Timing AT10 10mm
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys Timing L Pitch 9.53mm
Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Taperlock
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - 25.4mm Wide - Taperlock
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - STOCK - Carbon Steel
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Through Bore
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.
Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Through Bore
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.
Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - 25.4mm Wide - Through Bore
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts.
Aluminium alloy and steel. Aluminium have finished bore with set screw. Steel have either finished or unfinished bore as shown in the listings. Unfinished types requires drilling and tapping. Unfinished bore type requires machining to finished size.
Related Information:
Pulleys Timing GT2 8mm
Pulleys - Timing - 8.000mm Pitch - GT2 - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide.
Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys Timing GT2 -14mm
Pulleys - Timing - 14.000mm Pitch - GT2 - 115mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 55mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys Timing GT2 3mm
Pulleys - Timing - 3.000mm Pitch - GT2 - 15mm Wide - Through Bore
Timing Pulleys to suit GT 3.000mm Pitch Timing Belts 15mm Wide.
Aluminium Alloy. Finsihed through bore. Set screw locking.
Related Information:
Pulleys Timing MXL Pitch
Pulleys - Timing - 2.032mm Pitch - MXL - 9.5mm Wide - Through Bore
Timing Pulleys to suit MXL 2.032mm Pitch Timing Belts. Suits belts 9.5 to 9.6mm wide
2.032mm metric is equivalent to 0.080 pitch imperial. Aluminium Alloy. Finished Through Bore Ready To Assemble.
Related Information:
Pulleys Timing XL Pitch 5.08mm
Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Plastic - Insert
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide. Brass insert.
Related Information:
Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore
Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.
Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size.
Related Information:
Pulleys Timing T2.5 2.5mm
Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing AT10 10mm
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 126999 products in 2361 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
