Pulleys flat belt categories
Pulleys Grooved
Pulleys - U Groove - Idler - Steel - With Bearing
Steel with Steel Ball Bearings
Use with round belts such as Rounthane or O-Rings.
Related Information:
Pulleys Vee
Pulleys - Vee - A - 4L - Single Row - Through Bore - Cast Iron
Dual purpose pulleys suit A section and M section belts
To determine the pitch diameter for M section deduct 8.636mm (0.34 inch) from the pitch diameter listed.
Related Information:
Pulleys - Vee - M - 3L - Single Row - Through Bore - Cast Iron
Dual purpose pulleys suit A section and M section belts
To determine the pitch diameter for A section add 8.636mm (0.34 inch) to the pitch diameter listed.
Related Information:
Pulleys Timing AT10 10mm
Pulleys - Timing - 10.000mm Pitch - AT10 - 16mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 25mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 32mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys - Timing - 10.000mm Pitch - AT10 - 50mm Wide - Through Bore
Timing pulleys to suit AT10 Series belts
Aluminium. Zinc Plated Steel Flanges. Plain Hub No Grub Screw. Finished Bore.
Related Information:
Pulleys Timing AT5 5mm
Pulleys - Timing - 5.000mm Pitch - AT5 - 10mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - 16mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - AT5 - 25mm Wide - Through Bore
Timing pulleys to suit AT5 Series belts
Aluminium Alloy. Steel Flanges. Hub is unthreaded, you will need to drill and tap with your required locking screw size.
Related Information:
Pulleys Timing T01 1mm
Pulleys - Timing - 1.000mm Pitch - 3mm Wide - Through Bore
Timing Pulleys to suit 1mm Pitch Timing Belts.
Aluminium Alloy. With set screw.
Related Information:
Pulleys - Timing - 1.000mm Pitch - 6mm Wide - Through Bore
Timing Pulleys to suit 1mm Pitch Timing Belts.
Aluminium Alloy. With set screw.
Related Information:
Pulleys Timing T10 10mm
Pulleys - Timing - 10.000mm Pitch - T10 - 16mm Wide - Through Bore
Timing pulleys to suit T10 Series belts
Related Information:
Pulleys - Timing - 10.000mm Pitch - T10 - 26mm Wide - Through Bore
Timing pulleys to suit T10 Series belts
Aluminium Alloy. Finished through bore ready to assemble.
Related Information:
Pulleys - Timing - 10.000mm Pitch - T10 - 32mm Wide - Through Bore
Timing pulleys to suit T10 Series belts
Aluminium Alloy. Finished through bore ready to assemble.
Related Information:
Pulleys - Timing - 10.000mm Pitch - T10 - 50mm Wide - Through Bore
Timing pulleys to suit T10 Series belts
Aluminium Alloy. Finished through bore ready to assemble.
Related Information:
Pulleys Timing AT10 10mm
Pulleys - Timing - 10.000mm Pitch - AT10 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing AT5 5mm
Pulleys - Timing - 5.000mm Pitch - AT5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
HTD 5mm series Flanges can be used with this stock.
Related Information:
Pulleys Timing GT2 -14mm
Pulleys - Timing - 14.000mm Pitch - GT2 - 115mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 115mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 170mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 170mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 40mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 40mm wide. Taperlock
Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 55mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 55mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 14.000mm Pitch - GT2 - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 14.000mm Pitch Timing Belts. Suits belts 85mm wide. Taperlock
Cast iron with black oxide coating. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys Timing GT2 2mm
Pulleys - Timing - 2.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing GT2 3mm
Pulleys - Timing - 3.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing GT2 5mm
Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Taperlock
Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide.
Cast iron with black oxide coating. Match with a taperlock bush for your required shaft size.
Related Information:
Pulleys - Timing - 5.000mm Pitch - GT2 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing GT2 8mm
Pulleys - Timing - 8.000mm Pitch - GT2 - 12mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 12.0mm wide.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 20mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 20mm wide.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 30mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 30mm wide.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 50mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 50mm wide.
Black Oxide Coated Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 8.000mm Pitch - GT2 - 85mm Wide - Taperlock
Timing Pulleys to suit HTD 8.000mm Pitch Timing Belts. Suits belts 85mm wide.
Black Oxide Coated Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys Timing H Pitch 12.7mm
Pulleys - Timing - 12.700mm Pitch - H - 25.4mm Wide - Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Taperlock bush required for bore.
Cast Iron and Steel. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 12.700mm Pitch - H - 38.1mm Wide - Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 38.1mm. Taperlock bush required for bore.
Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 12.700mm Pitch - H - 50.8mm Wide - Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 50.8mm. Taperlock bush required for bore.
Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 12.700mm Pitch - H - 76.2mm Wide - Taperlock
Timing Pulleys to suit H Series 12.700mm Pitch Timing Belts. Belt width 76.2mm. Taperlock bush required for bore.
Steel and Cast Iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 12.700mm Pitch - H - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing HTD 3mm
Pulleys - Timing - 3.000mm Pitch - HTD - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing HTD 5mm
Pulleys - Timing - 5.000mm Pitch - HTD - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing HTD 8mm
Pulleys - Timing - 8.000mm Pitch - HTD - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing L Pitch 9.53mm
Pulleys - Timing - 9.525mm Pitch - L - 12.7mm Wide - Taperlock
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Black oxide coated steel or cast iron. Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - 19.1mm Wide - Taperlock
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - 25.4mm Wide - Taperlock
Timing Pulleys to suit L Series 9.525mm Pitch Timing Belts. Taperlock bush required for bore.
Match with a taperlock to suit your bore requirements.
Related Information:
Pulleys - Timing - 9.525mm Pitch - L - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing MXL Pitch
Pulleys - Timing - 2.032mm Pitch - MXL - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
2.032mm metric is equivalent to 0.080 pitch imperial.
Related Information:
Pulleys Timing T10 10mm
Pulleys - Timing - 10.000mm Pitch - T10 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing T2.5 2.5mm
Pulleys - Timing - 2.500mm Pitch - T2.5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing T5 5mm
Pulleys - Timing - 5.000mm Pitch - T5 - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive.
Related Information:
Pulleys Timing 40DP LT Pitch
Pulleys - Timing - 2.073mm Pitch - 40DP - STOCK - Aluminium
For manufacture of timing pulleys or applications requiring multiple belts from a single drive. Also known as LT.
Related Information:
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 127030 products in 2352 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
