Plugs Hobby

Hobby - Nut Packs

Hobby Nut Packs. Includes Dubro Range

Hobby Gears - Spur - 48DP

A small selection of popular 48DP Plastic/ Metal Pinion and Spur gears

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a 48DP spur gear, divide multiply the no of teeth by 0.52917.

Hobby Gears - Spur - Module 0.4

A small selection of popular Module 0.4 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.4 spur gear with 20 teeth has a pitch diameter of 8mm. A module 0.4 spur gear with 10 teeth has a pitch diameter of 4mm.

Hobby Gears - Spur - Module 0.5

A small selection of popular Module 0.5 Brass Gear Sets 9 to 20 teeth

See main listings under Gears for sizes not listed here. To work out the pitch diameter of a metric spur gear, multiply the no of teeth by the module. A module 0.5 spur gear with 20 teeth has a pitch diameter of 10mm. A module 0.5 spur gear with 10 teeth has a pitch diameter of 5mm.

Hobby - Screw and Nut Combo Packs

Selection of Screw and Nut Combos. Includes Dubro Range

Hobby - Screw Packs

Hobby Screw Packs. Includes Dubro Range

Hobby - Washer Packs

Hobby Washer Packs. Includes Dubro Range

Batteries - Hobby - Lead Acid - 12V

All types of Lead Acid Battery

Accessories - Hobby - Aircraft

Generic Parts. Specific model parts may also be found by typing the model number into the search box. Reinforced Tape, Masking Tape, Micro Gear Nose, Gear Mech Retracts, Retractable Wing Tailwheels, gas struts

Accessories - Hobby - Body Clips

Large and small body clips. Fluoro or standard. Plastic coated or anodised. Range of colours. Bent and straight.

See also large selection of clips in R-Clips.

Accessories - Hobby - Car and Buggy

Generic Parts. Specific model parts may also be found by typing the model number into the search box. Fail safes, aerials, heat sinks, body clips, tune pipe, clutch bell, bump start, engine break stand, engine fans, antenna tubes and tire warmers.

Includes Kyosho pull starts.

Accessories - Hobby - Helicopter

Generic Parts. Specific model parts may also be found by typing the model number into the search box. Training Gear, Polished Tuned Muffler, Heli Pitch, Foam Stand

Motors - Hobby - Brushed Packages

Brushed RC Motor and ESC Packages

Wheels - Hobby - General

Also see combined categories:
All Wheels

Includes wheels for robots and general hobby applications

Also see tracks for Robotic applications.

Rims - Hobby - Car 1-10 - Off Road - Front - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

Rims - Hobby - Car 1-10 - Off Road - Rear - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

Rims - Hobby - Car 1-10 - Road and Drift - Alloy

Also see combined categories:
All Rims

Rims for RC wheels

Rims - Hobby - Car 1-10 - Road and Drift - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

Rims - Hobby - Car and Buggy 1-8 - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

Rims - Hobby - Monster Truck 1-10 - Plastic

Also see combined categories:
All Rims

Rims for RC wheels

Tyres - Hobby - Car 1-10 - Drift

Also see combined categories:
All Tyres

Tyres - Hobby - Car 1-10 - Monster Truck

Also see combined categories:
All Tyres

Tyres - Hobby - Car 1-10 - On Road

Also see combined categories:
All Tyres

Tyres - Hobby - Car and Buggy 1-10 - Off Road - Front

Also see combined categories:
All Tyres

Wheels - Hobby - Car 1-10 - Drift

Also see combined categories:
All Wheels
All Car and Buggy Wheels

Drift wheels

Wheels - Hobby - Car 1-10 - On Road - Complete

Also see combined categories:
All Wheels
All Car and Buggy Wheels

Patterned types

Wheels - Hobby - Car and Buggy 1-10 - Off Road - Complete

Also see combined categories:
All Wheels
All Car and Buggy Wheels

Wheels - Hobby - Car and Buggy 1-8 - Off Road - Complete

Also see combined categories:
All Wheels
All Car and Buggy Wheels

Wheels - Hobby - Plane

Also see combined categories:
All Wheels

Includes Dubro Range

Books - Hobby - Mousetrap Vehicles

Also see combined categories:
All Books

Tips and tricks and how-to guides for Mousetrap powered cars and boats

Activities guide and plans.

Switches - Hobby

Includes Deans and T Connectors.

Accessories - Hobby - Dogbones

Dog bones for Remote Control Cars

Accessories - Hobby - Wheel Nuts Adaptors and Pins

Replacement Wheel Nuts, adaptors and pins for remote control cars

Fans - Hobby

Fans for Remote Control Motors

Fans for Remote Control Motors.

Workstations - Hobby

Workstations for Hobbies.

Workstations for Hobbies.

Spacers - Round - Hobby

Also see combined categories:
All Round Spacers
All Flat Washers and Spacers - Non Metallic

Inexpensive nylon spacers for hobby applications

Heat Shrink

Red or black heat shrink.

Shafting - Ground - Hobby - Steel

Also see combined categories:
All Shafting
All Steel Shafting

Silversteel shafting for hobbies. Not suitable for precision bearings.

Suitable for use with plastic gears, bushes, couplings etc. Not recommended for use with precision steel or stainless steel bearings. Some sizes have special features such as serrations or small barbs (noted in description). Unground ends. Ideal for axles in robotic applications and educational projects.

Gearmotors - Basic - Hobby - 12.1mm Diameter

Also see combined categories:
All Basic Gearmotors

Small light weight geared motors used in toys and small solar applications

NOTE! These do not have a standard output shaft. The output is a plastic crossed block (see diagram) which is designed to be fitted to a fabricated coupling in O.E.M applications. However, the plastic block would be suitable for drilling and attaching objects with wire for rotating mobile type applications.

Gearmotors - Basic - Hobby Kits

Also see combined categories:
All Basic Gearmotors

These gearmotor kits are of simple mainly plastic design. Great for making simple toys, hobbies or concept testing. Educational series.

Servo Motor - Hobby - General

Also see combined categories:
All Hobby Servo Motors

For cars, planes, boats and helicopters. JR, Spektrum, Futaba and Hitec

Gear Strength: Using nylon as a base, Karbonite gears are 4x the strength, Metal gears 16x and Titanium Alloy 48x.

Pulleys - Geared - Hobby

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.

Servo Motor - Hobby - Robotics

Also see combined categories:
All Hobby Servo Motors

Hitec and more

Gear Strength: Using nylon as a base, Karbonite gears are 4x the strength, Metal gears 16x and Titanium Alloy 48x.

Couplings - Rigid - Hobby - Brass

Also see combined categories:
All Rigid Couplings

A selection of inexpensive brass couplings for shaft sizes from 2 to 5 mm.

Tools - Cutting - Hobby

Also see combined categories:
All Tools

Knives and blades, cutting mats, saws, sidecutters

Lengths shown are based on standard stock but may vary.

Kits - Pulleys - Plastic - Hobby

This 6 pack pulley wheek kit is very useful many interestiing projects for torque transmition. Hobbyists and students will love to have them.

Plywood and MDF - Hobby Sheets

Also see combined categories:
All Plywood

Lauan Hobby Grade. Delivery available on these sheets at standard delivery rates

Servo Motor - Accessories

Also see combined categories:
All Servo Accessories

Cases, gears and horns to suit popular servos

Servo Motor - Brackets

Also see combined categories:
All Servo Accessories

Brackets to suit servo motors for robotic applications

Motors - Stepper - Basic Hobby

Also see combined categories:
All Stepper Motors

Small light weight stepper motor for your hobby or light duty projects

Pulleys - U Groove - Plastic - Hobby

Also see combined categories:
All U Groove Bearings and Pulleys

Plastic with no locking method. Use with O-Rings or Rounthane Belts.

RC Spare Parts - Hobby Pro

Hobby Pro spare parts listed by description. Suits Mutilator, Matador, H5 and H6 and other 1/5th Scale Petrol Cars

Gear Racks - Module 0.5 - Hobby - Plastic

Also see combined categories:
All Hobby Gears

POM Plastic

Plastic Only. Comes in 4 colours, blue, yellow, green, white. Inexpensive for hobby and toy use.

Gears - Mitre - Module 0.5 - Hobby - Economy - Plastic

Also see combined categories:
All Metric Mitre Gears
All Hobby Gears

POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.

Gears - Spur - Module 0.5 - Hobby - Economy - Plastic

Also see combined categories:
All Metric Spur Gears
All Hobby Gears

PCD = No. of Teeth x 0.500mm. 20^o Pressure Angle - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.

Wheels - Mousetrap Vehicle Wheels

Also see combined categories:
All Educational Projects

Wheels for mousetrap vehicles

Servo Motor - Analog - Sports

Also see combined categories:
All Analog Hobby Servo Motors

Standard Analog Sports Servo motors.

Universal Joints - Double Joint - Hobby

Also see combined categories:
All Universal Joints
All Double Joint Universals

C45 Carbon Steel. Maximum operating angle 60 degree. Slow speed only.

Universal Joints - Single Joint - Hobby

Also see combined categories:
All Universal Joints
All Single Joint Universals

C45 Carbon Steel. Maximum operating angle 30 degree. Slow speed only.

Tools - Drills

Also see combined categories:
All Tools

Hobby drill for very small bits.

Gears - Crown Wheel - Module 0.5 - Hobby - Plastic

Also see combined categories:
All Hobby Gears

PCD = No. of Teeth x 0.500mm - POM Plastic

Plastic Only. Inexpensive for hobby and toy use. No locking mechanisms.

Channel - Brass

For general hobby applications.

Rod - Round - Acetal

Also see combined categories:
All Plastic Rod

Hard, stiff plastic for machining bushes, gears etc with close tolerances. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.41 g/cm3 - Operating Temp -40 to 120 C. Tensile Strength 60-70 Mpa / Hardness 80 Rockwell M. Small diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Rod - Round - Brass

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Rod - Round - Nylon

Also see combined categories:
All Plastic Rod

High impact strength and toughness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.13 g/cm3 - Operating Temp -40 to 160 C. Tensile Strength 78 Mpa / Hardness 82 Rockwell M. Co-efficient of friction 0.20-0.30. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Rod - Round - PTFE

Also see combined categories:
All Plastic Rod

Lowest co-efficient of friction. Excellent chemical resistance. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 2.20 g/cm3 - Operating Temp -260 to 260 C. Tensile Strength 10-40 Mpa / Hardness D50-55 Shore. Co-efficient of friction 0.05-0.20. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Rod - Round - Urethane

Also see combined categories:
All Non Metallic Rod - Round

Hard urethane rubber compound. Machinable.

Length +/- 3.2mm. Diameter +/- 2 percent.

Servo Motor - Digital - Premium Sports

Also see combined categories:
All Digital Hobby Servo Motors

Premium Digital Sport Servos.

Rod - Round - Carbon Fibre

Also see combined categories:
All Non Metallic Rod - Round

High impact light weight carbon fibre for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.

Rod - Round - Glass Fibre

Also see combined categories:
All Plastic Rod

High impact light weight fibreglass for modelling and kites.

Glass fibre rod is more flexible and less brittle than carbon fibre rod.

Rod - Round - Polyester PETP

Also see combined categories:
All Plastic Rod

High mechanical strength, stiffness and hardness. Sizes listed are FINISHED SIZE. Product supplied will be larger.

Specific Gravity 1.39 g/cm3 - Operating Temp 115 C / 5000 hrs - 100 C / 20000 hrs. Tensile Strength 90 Mpa. Hardness 96 Rockwell M. Smaller diameters may not be perfectly straight. Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. As this product requires machining, larger diameters may be supplied in lieu to expedite your order.

Rod - Round - Sintered Bronze

Also see combined categories:
All Metal Rod - Round

Sintered bronze rod is supplied oversized so it can be machine finished to the dimensions shown.

Sizes listed are FINISHED SIZE. Product supplied will be larger to allow for machining. Oil impregnated porous bronze rod. Smaller diameters may not be supplied straight. B438 grade 1, Type 2 - AMS4805-D. SAE 841 Type 1, Class A.

Rod - Round - Stainless Steel

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Rod - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This rod is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.

Strip - Soft Metal Packs

For general hobby applications. This brass strip is annealed soft to make it easier to bend. Brass.

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.

RC Spare Parts - Venom

Venom Hobby Parts listed by description. Parts for 1/10 crawler, Baja, 1/8 scale cars, Beacon, Corsair, CPR Creeper, D Micro, DXL, EKOS, EPO, GPV-1, MINIZ, Island Hopper, King, Segad, KOS, KWA, M05, ME-109, MTT, Night Ranger 3D, Outlaw RC, Ozone Heli

Parts also to suit P-51, Texan, Savage, Scorpion AX10, Skywolf 3CH, Strait Jacket, TraXXas, TRX Slash. Ailerons fittings, Anti-rotation arm, A arms, Axle, Bag, Ball end, batteries assembleys, battery(bags, bars, box, case, charger, holder), beadlock, bearing kits, retainers and set. bell crank, blade grips and sets, body posts, bolt, bracket, bulkhead, cables, camber gauge, canopy, caps, carburettor, charger, chassis covers and plates. Cockpit cover, Collars, connectors, control links, control links, tray and units, coupler, cowl, crankcase, crankshaft, cylinder, Damper, decal set, differential (case, housing and system). Dig unit, drive (belt and dog), driveline, electronics unit, elevator, e-ring, ESC, exhaust (coupler, deflector and pipe), fail safes, feathering spindle.

Tools - Wire Working

Also see combined categories:
All Tools

For general hobby applications. Wire crimping and wire bending tools. Spring winder and spring looping.

RC Spare Parts - Dragon Hobbies

Dragon Hobby parts listed by description. Icludes VX, Lucky Sprint, Electric Boats, Segad and more.

Bearings - Ball - Economy - Chrome Steel

Also see combined categories:
All Radial Ball Bearings
All Economy Bearings

Taiwanese Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore.

Tube - Round - Soft Metal Packs

Also see combined categories:
All Soft Metal Packs

For general hobby applications. This tube is annealed soft to make it easier to bend. Copper, brass and aluminium,

300mm lengths. Not recommended for heavy duty applications. For use with bearings we suggest you use items from the category - Shafting - Ground.

Joints - Tee - Tubing and Rod

Inexpensive nylon joiners for hobby tubing and rod

Sheet - Aluminium - T1100

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T1100 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.

Sheet - Aluminium - T7075

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T7075 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.

Tube - Round - Aluminium

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Tube - Round - Brass

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Tube - Round - Copper

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Tube - Square - Aluminium

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Tube - Square - Brass

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Couplings - Eccentric Drive

1.88mm bore press fits most standard hobby motors (2mm shaft)

Bearings - Ball - Economy - 440C Stainless

Also see combined categories:
All Radial Ball Bearings
All Economy Bearings

Taiwanese or Italian Hobby Bearings - Inexpensive Option. The type you find at most hobby shops.

Single row radial ball bearings. Not all bearings are readily available. Please enquire. Miniature sizes from 1mm to 10mm bore and larger sizes to over 50mm bore. The larger bearings 10mm bore size and above will usually be Italian whilst the smaller sizes are generally Taiwainese.

Tube - Round - Stainless Steel

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.