Small Parts & Bearings - an MBA company

Plastic Bearing Oliver Design Xyratex Parts Categories


Disk Cleaning Machine Bearings


Plastic Bearing Oliver Design - Xyratex Parts


Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.

A larger range of Plastic Bearing Oliver Design - Xyratex Parts might be available on the Bearing Shop Online site. You might also be interested in the range of Plastic Bearing Oliver Design - Xyratex Parts on the Miniature Bearings Australia site.


Collectibles - Metal Motorcycles
Collectibles - Metal Motorcycles


Beautiful model motorbikes in various styles including choppers, road bikes and vintage designs.

Made from industrial parts including bearings, screws, nuts, springs, chain links, rod, tubing and other parts. Two colours available - gunmetal grey or copper finish. Each bike is hand made, and therefore there may be minor differences between the bikes of a particular model. Re-Cycle motorbikes are a limited edition set of 20.


Bearings - Acetal - Solid - For Plastic Housings
Bearings - Acetal - Solid - For Plastic Housings


Insert bearings ideal for wet conditions. Similar to wide inner ring bearings for P, F, Fl type housings but solid plastic.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

A larger range of Bearings - Acetal - Solid - For Plastic Housings might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Solid - For Plastic Housings on the Miniature Bearings Australia site.


Bearings - Acetal - Double Row - with Glass Balls
Bearings - Acetal - Double Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Double Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range of Bearings - Acetal - Double Row - with Glass Balls might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Double Row - with Glass Balls on the Miniature Bearings Australia site.


Bearings - Acetal - Single Row - with Glass Balls
Bearings - Acetal - Single Row - with Glass Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from Ground Glass - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range of Bearings - Acetal - Single Row - with Glass Balls might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Single Row - with Glass Balls on the Miniature Bearings Australia site.


Bearings - Acetal - MRI Table
Bearings - Acetal - MRI Table


Special acetal bearings for MRI table wheels


A larger range of Bearings - Acetal - MRI Table might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - MRI Table on the Miniature Bearings Australia site.


Bearings - Acetal - Special Purpose
Bearings - Acetal - Special Purpose


Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems


A larger range of Bearings - Acetal - Special Purpose might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Special Purpose on the Miniature Bearings Australia site.


Bearings - Acetal - Special Types
Bearings - Acetal - Special Types


Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

A larger range of Bearings - Acetal - Special Types might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Special Types on the Miniature Bearings Australia site.


Bearings - Acetal with Glass Balls - For Plastic Housings
Bearings - Acetal with Glass Balls - For Plastic Housings

Also see combined categories:
All Acetal Bearings for Housings

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

A larger range of Bearings - Acetal with Glass Balls - For Plastic Housings might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal with Glass Balls - For Plastic Housings on the Miniature Bearings Australia site.


Bearings - Acetal with Stainless Balls - For Plastic Housings
Bearings - Acetal with Stainless Balls - For Plastic Housings

Also see combined categories:
All Acetal Bearings for Housings

Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

A larger range of Bearings - Acetal with Stainless Balls - For Plastic Housings might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal with Stainless Balls - For Plastic Housings on the Miniature Bearings Australia site.


Bearings for Pool Equipment
Bearings for Pool Equipment


Acetal bearings for spa jets and pool vacuum wheels

No lubrication required other than the water they are running in.

Related Information:

A larger range of Bearings for Pool Equipment might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings for Pool Equipment on the Miniature Bearings Australia site.


Bearings - Polypropylene - Special Types
Bearings - Polypropylene - Special Types


Polypropylene is for special chemical compatibility usages. Please refer to a compatibility chart.

See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions.

A larger range of Bearings - Polypropylene - Special Types might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Polypropylene - Special Types on the Miniature Bearings Australia site.


Bearings - Acetal - Disk Cleaning Applications
Bearings - Acetal - Disk Cleaning Applications


Special acetal bearings for disk cleaning


A larger range of Bearings - Acetal - Disk Cleaning Applications might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Disk Cleaning Applications on the Miniature Bearings Australia site.


Bearings - Acetal - Double Row - with 316 Stainless Steel Balls
Bearings - Acetal - Double Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Double Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Double Row - with 316 Stainless Steel Balls on the Miniature Bearings Australia site.


Bearings - Acetal - Single Row - with 302 Stainless Steel Balls
Bearings - Acetal - Single Row - with 302 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 302 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Single Row - with 302 Stainless Steel Balls on the Miniature Bearings Australia site.


Bearings - Acetal - Single Row - with 316 Stainless Steel Balls
Bearings - Acetal - Single Row - with 316 Stainless Steel Balls

Also see combined categories:
All Plastic Ball Bearings
All Plastic Single Row Bearings

Bearings for Extreme Corrosion Resistance - Low Speed - Low Load.

Races made from Acetal - Balls made from 316 Stainless Steel - Cages from Acetal or Nylon. Lubrication - Water Lubrication or can be run dry - Must lubricate over 2500 RPM. Temperature Range - Minus 30 oC to 100 oC Continuous.

Related Information:

A larger range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Acetal - Single Row - with 316 Stainless Steel Balls on the Miniature Bearings Australia site.


Bearings - Conveyor - Hex Bore - Plastic - Double Row
Bearings - Conveyor - Hex Bore - Plastic - Double Row

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.

A larger range of Bearings - Conveyor - Hex Bore - Plastic - Double Row might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Conveyor - Hex Bore - Plastic - Double Row on the Miniature Bearings Australia site.


Bearings - Conveyor - Hex Bore - Plastic - Single Row
Bearings - Conveyor - Hex Bore - Plastic - Single Row

Also see combined categories:
All Conveyor Bearings

Plastic hex bore conveyor bearings with 316 stainless balls

Loads and Speeds are for reference only. Testing recommended.

A larger range of Bearings - Conveyor - Hex Bore - Plastic - Single Row might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Conveyor - Hex Bore - Plastic - Single Row on the Miniature Bearings Australia site.


Housings - Bearing - Pillow Block - Plastic
Housings - Bearing - Pillow Block - Plastic


Use with steel or plastic bearing inserts for plastic housings.

Load and speed capability depend on the bearing used.

Related Information:

A larger range of Housings - Bearing - Pillow Block - Plastic might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Plastic on the Miniature Bearings Australia site.


Housings - Bearing - Flanged - 2 Bolt Hole - Plastic
Housings - Bearing - Flanged - 2 Bolt Hole - Plastic


Load and speed capability depend on the bearing used. Use with steel or plastic bearing inserts for plastic housings.

Related Information:

A larger range of Housings - Bearing - Flanged - 2 Bolt Hole - Plastic might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Flanged - 2 Bolt Hole - Plastic on the Miniature Bearings Australia site.


Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic
Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic


Load and speed capability depend on the bearing used. Use with steel bearing inserts for plastic housings.

Related Information:

A larger range of Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Flanged - 3 Bolt Bracket - Plastic on the Miniature Bearings Australia site.


Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings
Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings


Insert bearings ideal for wet conditions. Similar to standard wide inner ring bearings for P, F, Fl type housings.

Load and speed calculations are for reference only. Testing is recommended.

Related Information:

A larger range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - 316 Stainless Steel - Spherical OD - For Plastic Housings on the Miniature Bearings Australia site.


Washers - Self Aligning - Sets - Plastic
Washers - Self Aligning - Sets - Plastic

Also see combined categories:
All Thrust Washers
All Aligning Washers

Spherical Seat Washers

Tensile strengths shown are Static Axial in Newtons. Easy to install. Good friction wear properties.

Related Information:

A larger range of Washers - Self Aligning - Sets - Plastic might be available on the Bearing Shop Online site. You might also be interested in the range of Washers - Self Aligning - Sets - Plastic on the Miniature Bearings Australia site.


Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Pulleys - U Groove - Idler - Plastic - With Ball Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:

You might also be interested in the range of Pulleys - U Groove - Idler - Plastic - With Ball Bearing on the Miniature Bearings Australia site.


Bushings - Spherical - Plastic
Bushings - Spherical - Plastic

Also see combined categories:
All Spherical Bushings

Plastic spherical plain bearings. Also known as ball bushings.

Ball Material W300. Housing Iglidur G. Maintenance Free. Self lubricating. Compensates for axial loads and misalignment. Corrosion resistant. High vibration dampening capacity.

A larger range of Bushings - Spherical - Plastic might be available on the Bearing Shop Online site. You might also be interested in the range of Bushings - Spherical - Plastic on the Miniature Bearings Australia site.


Rollers - Solid - Stud Mount - Black Neoprene
Rollers - Solid - Stud Mount - Black Neoprene

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.

A larger range of Rollers - Solid - Stud Mount - Black Neoprene might be available on the Bearing Shop Online site. You might also be interested in the range of Rollers - Solid - Stud Mount - Black Neoprene on the Miniature Bearings Australia site.


Balls - Plastic - Torlon
Balls - Plastic - Torlon

Also see combined categories:
All Plastic Balls
All Non Metallic Balls

TorlonTM 4301 Bearing Grade Balls. Grade 1.

Polyamide-imide (TorlonTM) Balls. Rockwell Hardness (Method A): E86 or M109-119. Specific Gravity: 1.38. Colour: Brown Opaque.

Related Information:

A larger range of Balls - Plastic - Torlon might be available on the Bearing Shop Online site. You might also be interested in the range of Balls - Plastic - Torlon on the Miniature Bearings Australia site.


Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended.

A larger range of Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Conveyor - Hex Bore - Stainless Steel - Double Row on the Miniature Bearings Australia site.


Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row
Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row

Also see combined categories:
All Conveyor Bearings

316 stainless conveyor bearings with plastic cage and plastic hex insert

Loads and Speeds are for reference only. Testing recommended.

A larger range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Conveyor - Hex Bore - Stainless Steel - Single Row on the Miniature Bearings Australia site.


Bushes - Plastic - Clip - Double Flanged
Bushes - Plastic - Clip - Double Flanged

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

For use with sheet metal. Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight. M250 Polymer minus 40 oC to 80 oC (minus 40 Deg F to 176 Deg F).

Related Information:

A larger range of Bushes - Plastic - Clip - Double Flanged might be available on the Bearing Shop Online site. You might also be interested in the range of Bushes - Plastic - Clip - Double Flanged on the Miniature Bearings Australia site.


Pulleys - U Groove - Idler - Plastic - With Plain Bore
Pulleys - U Groove - Idler - Plastic - With Plain Bore

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:

You might also be interested in the range of Pulleys - U Groove - Idler - Plastic - With Plain Bore on the Miniature Bearings Australia site.


Bearings - Ball - 316 Stainless Steel - Single Row - Sealed
Bearings - Ball - 316 Stainless Steel - Single Row - Sealed

Also see combined categories:
All 300 Grade Stainless Bearings

Marine, food and medical grade Stainless Steel - Non Hardenable. Polyethylene plastic seals.

Tolerances differ from standard bearing types. Due to the tolerance range it is recommended that each actual bearing is measured to calculate fits. Polymer cages, grade 200 type 316 stainless balls, AISI 316 stainless races, greased. Rings machined from solid rod stock producing true running concentric bearings. Low load, low speed applications requiring maximum corrosion resistance. Usual supply is unlubricated so that they can be used immediately in applications exposed to water, or lubricated by the user with their preferred grease. Special orders can be run with a selected lubricant. Note that some bearings may already be listed with grease.

Related Information:

A larger range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - 316 Stainless Steel - Single Row - Sealed on the Miniature Bearings Australia site.


Bearings - Ball - Textile Industry
Bearings - Ball - Textile Industry


Special Design Stainless and Chrome Steel Bearings for the Textile Industry.

Bearings in this category often have special features. Designed for use in textile industry machinery.

Related Information:

A larger range of Bearings - Ball - Textile Industry might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Ball - Textile Industry on the Miniature Bearings Australia site.


Bearings - Press-Fit - Self Aligning - Delrin -tm-
Bearings - Press-Fit - Self Aligning - Delrin -tm-

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo acetal bearings in specially designed press fit retainers

See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.

Related Information:

A larger range of Bearings - Press-Fit - Self Aligning - Delrin -tm- might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Press-Fit - Self Aligning - Delrin -tm- on the Miniature Bearings Australia site.


Bushes - Plastic - Clip - Bevelled Edge
Bushes - Plastic - Clip - Bevelled Edge

Also see combined categories:
All Plastic Bushes
All Flanged Plastic Bushes

M250 Polymer minus 40 Deg C to 80 Deg C (minus 40 Deg F to 176 Deg F). Used as a light duty split bearing.

Low clearance. Maintenance free. Economical. High Precision. High wear resistance. Light weight.

Related Information:

A larger range of Bushes - Plastic - Clip - Bevelled Edge might be available on the Bearing Shop Online site. You might also be interested in the range of Bushes - Plastic - Clip - Bevelled Edge on the Miniature Bearings Australia site.


Bearings - Hydrodynamic Pressure
Bearings - Hydrodynamic Pressure


Alternative to ball bearings - quiet operation - patented design.

Applications include compact fan motors, copy machines, printers, laptop computers, cameras and toys. Stainless Steel casing and shield - Long Life. Use with Case Hardened shafting 2um surface finish -0.007/-0.012 for normal use. Use with Case Hardened shafting 1um surface finish -0.005/-0.007 for high accuracy use. 30% weight savings over ball bearings.

Related Information:

A larger range of Bearings - Hydrodynamic Pressure might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Hydrodynamic Pressure on the Miniature Bearings Australia site.


Leadscrew Nuts - Metric - Flanged - Plastic
Leadscrew Nuts - Metric - Flanged - Plastic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Iglidur W300. Single Start / Right Hand.

Related Information:

A larger range of Leadscrew Nuts - Metric - Flanged - Plastic might be available on the Bearing Shop Online site. You might also be interested in the range of Leadscrew Nuts - Metric - Flanged - Plastic on the Miniature Bearings Australia site.


Bearings - Needle Roller - Shell Type - Closed End
Bearings - Needle Roller - Shell Type - Closed End


Light Weight. Compact Design.

Related Information:

A larger range of Bearings - Needle Roller - Shell Type - Closed End might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Needle Roller - Shell Type - Closed End on the Miniature Bearings Australia site.


Bearings - Needle Roller - Shell Type - Open Ends
Bearings - Needle Roller - Shell Type - Open Ends


Light Weight. Compact Design.

Related Information:

A larger range of Bearings - Needle Roller - Shell Type - Open Ends might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Needle Roller - Shell Type - Open Ends on the Miniature Bearings Australia site.


Washers - Disc Spring - Ball Bearing Type
Washers - Disc Spring - Ball Bearing Type

Also see combined categories:
All Disc Springs

Specially designed for preloading the outer ring of ball bearings. C1075 steel. Also known as belleville washers.

Ensures perfect bearing positioning with no sideways play. May be used to provide bearing preload. Load tolerance +/- 20% of load shown.

A larger range of Washers - Disc Spring - Ball Bearing Type might be available on the Bearing Shop Online site. You might also be interested in the range of Washers - Disc Spring - Ball Bearing Type on the Miniature Bearings Australia site.


Rollers - Solid - Stud Mount - Coloured Urethane
Rollers - Solid - Stud Mount - Coloured Urethane

Also see combined categories:
All Solid Stud Mount Rollers

Used on conveyors, belt idlers, shock cushioners, stamping die part guides, supports etc.

Blue colour may turn a shade of green when exposed to UV lighting. Designed for use in machines and assembly operations where part movement and protection is needed. Complete with washer and locknut. Free idling with ball bearings.

A larger range of Rollers - Solid - Stud Mount - Coloured Urethane might be available on the Bearing Shop Online site. You might also be interested in the range of Rollers - Solid - Stud Mount - Coloured Urethane on the Miniature Bearings Australia site.


Rings - Hoist - With Ball Bearings
Rings - Hoist - With Ball Bearings

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.

You might also be interested in the range of Rings - Hoist - With Ball Bearings on the Miniature Bearings Australia site.


Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300
Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Iglidur W300 Plastic. Single Start / Right Hand.

Related Information:

A larger range of Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300 might be available on the Bearing Shop Online site. You might also be interested in the range of Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300 on the Miniature Bearings Australia site.


Bearings - Press-Fit - Self Aligning - Sintered Bronze
Bearings - Press-Fit - Self Aligning - Sintered Bronze

Also see combined categories:
All Spyraflo Mounted Bearings

Spyraflo sintered bronze bearings in specially designed press fit retainers

See links at bottom of web page for more information. +/- 5% Static Alignment. Use punch of min dia. J relieved to dia. K x 2mm deep. Refer datasheet for dia. K and J. Link at bottom of web page.

Related Information:

A larger range of Bearings - Press-Fit - Self Aligning - Sintered Bronze might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Press-Fit - Self Aligning - Sintered Bronze on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Grooved - Chrome Steel
Bearings - Thrust - Ball - Grooved - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range of Bearings - Thrust - Ball - Grooved - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Grooved - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Grooved - Stainless Steel
Bearings - Thrust - Ball - Grooved - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range of Bearings - Thrust - Ball - Grooved - Stainless Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Grooved - Stainless Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Flat - Chrome Steel
Bearings - Thrust - Ball - Flat - Chrome Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range of Bearings - Thrust - Ball - Flat - Chrome Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Flat - Chrome Steel on the Miniature Bearings Australia site.


Bearings - Thrust - Ball - Flat - Stainless Steel
Bearings - Thrust - Ball - Flat - Stainless Steel

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type with Flat Washers

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others will require a stepped shaft as they have the same bore on both races. Some have a reduced size OD on one race allowing it to sit into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:

A larger range of Bearings - Thrust - Ball - Flat - Stainless Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Thrust - Ball - Flat - Stainless Steel on the Miniature Bearings Australia site.


Bushings - Snap - Closed
Bushings - Snap - Closed


Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Open snap bushings are designed to provide protection from sharp edges where cable or hose runs through plate steel.

Similar to a bung, but designed with expanding catch for use in holes in sheet products. Also see grommets for a similar product made from rubber.

Related Information:

You might also be interested in the range of Bushings - Snap - Closed on the Miniature Bearings Australia site.


Bushings - Snap - Open
Bushings - Snap - Open


Quality UL approved 6/6 nylon with flammabilty rating of 94V-2. Closed snap bushings are designed to keep out dust and other contaminants and protect from sharp edges where cable or hose used to run through a hole in plate steel.

Also called a dome plug. Also see grommets for a similar product made from rubber.

Related Information:

You might also be interested in the range of Bushings - Snap - Open on the Miniature Bearings Australia site.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.