Small Parts & Bearings - an MBA company

Pins Dowel Categories


Pins - Dowel Bushings
Pins - Dowel Bushings

Also see combined categories:
All Dowel Bushings

Series DB100 Spirol

Spring Steel. Precision rolled bushes manufactured from spring steel. Designed to eliminate the need for separate dowling where two components are to be located accurately together and fastened with bolts. They are available for use with bolts from M5 to M12.

Related Information:


Pins - Dowel - Extractable
Pins - Dowel - Extractable

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6. Din 7979.

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin to overcome the problem of pressure build up by trapped air. Hardness 55-62 HRC, HV550-650. Extractable pins may or may not have a flat to vent pressure when pulling. Also known as parallel pins.

Related Information:


Pins - Dowel - Extractable - With Vent
Pins - Dowel - Extractable - With Vent

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6 with a ground flat along one edge

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin. Hardness 55-62 HRC, HV550-650. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 303-304 Stainless - Chamfered End
Pins - Dowel - Standard - 303-304 Stainless - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 303/304 Grade Stainless - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends
Pins - Dowel - Standard - 303-304 Stainless - Rounded Both Ends

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 303/304 Grade Stainless- DIN7

Rounded end dowel pins are measured from the start of the edge rounding. This allows the pin to completely fill the hole after you grind off the rounded end. Diameter tolerances are m6. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 316 Stainless - Chamfered End
Pins - Dowel - Standard - 316 Stainless - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 316 Grade - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 316 Stainless - Rounded Both Ends
Pins - Dowel - Standard - 316 Stainless - Rounded Both Ends

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 316 Grade - DIN7

Diameter tolerances are m6. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - 416 Stainless - Chamfered End
Pins - Dowel - Standard - 416 Stainless - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - 416 Grade - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - Chamfered End
Pins - Dowel - Standard - Chamfered End

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - DIN6325, ISO2338

Note! Type 2 pins may be supplied in lieu of type 1 pins. Also known as parallel pins.

Related Information:


Pins - Dowel - Standard - Unhardened Steel - Rounded Both Ends
Pins - Dowel - Standard - Unhardened Steel - Rounded Both Ends

Also see combined categories:
All Dowel Pins

Precision Dowel Pins - DIN7

Diameter tolerances are m6. Also known as parallel pins.

Related Information:


Pins - Groove
Pins - Groove

Also see combined categories:
All Groove Pins

Non threaded press fit fastener that doesn't require a reamed hole as do dowel pins.Commonly used in place of taper pins.

An economic method of fastening without the need for precision drilled and reamed holes. Recommended hole tolerance is H11. Total length may be slightly longer than the nominal length. Expanded portion of the pin is compressed into the hole a few thousands of an inch wider than the nominal pin diameter. Radial forces lock the pin securely into the drilled hole.

Related Information:


Pins - Hammer Drive - Flat Head
Pins - Hammer Drive - Flat Head

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Low Carbon Steel (Series HP210) - self-colour, not plated cold formed pin. Simple, low cost assembly for use in mild steel, aluminium, brass or plastics. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:


Pins - Hammer Drive - Round Head - Stainless Steel
Pins - Hammer Drive - Round Head - Stainless Steel

Also see combined categories:
All Hammer Drive Pins

Used to replace screws where the need to remove the pin is unlikely.

Stainless Steel 304 Grade. Simple, low cost assembly. Secure - unlike a machine screw, a drive stud does not depend on tightening torque to be retained in the assembly. Drive studs do not require lock washers to prevent back-out. Designed for standard metric hole sizes and installation by hammer or press. Cold formed pins with helical knurls.

Related Information:


You may also be interested in

Shafting General Purpose


Rod - Drill Blanks
Rod - Drill Blanks

Also see combined categories:
All Silver Steel Drill Blanks
All Drill Rod

Made of hardened high speed steel.

Useful for turning and boring tools, constructing pins, hinge pins, arbors, pin gauges, dowels, preforating punchs. Can also be ground to make special cutting tools such as mills, spotfaces, angle or radii cutters, etc.


Balsa Wood - Dowel
Balsa Wood - Dowel


Round section dowel. Delivery Surcharges May Apply on Selected Items

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Related Information:


Tools - Pullers - Dowel Remover and Setter
Tools - Pullers - Dowel Remover and Setter

Also see combined categories:
All Tools

Designed for removing and setting any pull dowel up to 25.40mm.

Puller studs are threaded into the pull dowel and puller. Upward hammering motion with the slide handle is used to remove the dowel and a downward motion is used to set.

Related Information:


Pins - Locating - Spring - Plastic Pin - Sealed
Pins - Locating - Spring - Plastic Pin - Sealed

Also see combined categories:
All Locating Pins

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Related Information:


Pins - Locating - Spring - Plastic Pin - Unsealed
Pins - Locating - Spring - Plastic Pin - Unsealed

Also see combined categories:
All Locating Pins

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Related Information:


Pins - Locating - Spring - Stainless Pin - Unsealed
Pins - Locating - Spring - Stainless Pin - Unsealed

Also see combined categories:
All Locating Pins

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Related Information:


Pins - Locating - Spring - Steel Pin - Sealed
Pins - Locating - Spring - Steel Pin - Sealed

Also see combined categories:
All Locating Pins

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Related Information:


Pins - Locating - Spring - Steel Pin - Unsealed
Pins - Locating - Spring - Steel Pin - Unsealed

Also see combined categories:
All Locating Pins

Aluminium Body. For fixturing small parts in tight areas. Ideal for positioning and chucking flat or round parts for profile clamping.


Related Information:


Pins - Ball Lock - Ball Handle - Plastic Handle
Pins - Ball Lock - Ball Handle - Plastic Handle

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Also called detent pins.


Related Information:


Pins - Ball Lock - Button Handle - Commercial
Pins - Ball Lock - Button Handle - Commercial

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Also called detent pins.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Related Information:


Pins - Ball Lock - Button Handle - Stainless Steel
Pins - Ball Lock - Button Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


Related Information:


Pins - Ball Lock - Button Handle - Steel
Pins - Ball Lock - Button Handle - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium. Also called detent pins.


Related Information:


Pins - Ball Lock - Double Acting - L-Handle - Stainless Steel
Pins - Ball Lock - Double Acting - L-Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel. Also called detent pins.


Related Information:


Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel
Pins - Ball Lock - Double Acting - Ring Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel. Also called detent pins.


Related Information:


Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel
Pins - Ball Lock - Double Acting - T-Handle - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Self locking and positive locking. All components made from stainless steel. Also called detent pins.


Related Information:


Pins - Ball Lock - Economy - Stainless Steel
Pins - Ball Lock - Economy - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Type 303 stainless steel. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Stainless steel pins used in aircraft industry, food processing machinery, marine equipment, laboratory and testing equipment. Commercial drill tolerances provide clearance for standard pins. 303 stainless steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.

Related Information:


Pins - Ball Lock - Economy - Steel
Pins - Ball Lock - Economy - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Economical pins that can be used in military or conventional equipment. Also called detent pins.

Solid body construction with direct spring loaded ball. Used for locking telescoping tubes, securing bracket assemblies, anchoring clevis fittings, hinge pins, cotter pin replacement or setting up jigs and fixtures. Commercial drill tolerances provide clearance for standard pins. Zinc plated C1144 steel. Not for critical applications. If known pullout strength is required use commercial or industrial pins.

Related Information:


Pins - Ball Lock - Flanged Receptacles
Pins - Ball Lock - Flanged Receptacles

Also see combined categories:
All Ball Lock Receptacles

Provide a permanent and proper mating hole for commercial and industrial type quick release ball lock pins. Also called detent pins.

Designed to be used on materials or in applications where the pin does not have anything to lock against. Pin does not protrude past the bottom of the receptacle so they are ideal for blind hole applications. 303 Stainless Steel. Mounted with screws, rivets or bolts. The quick release ball lock pins are inserted from the flanged end, and the ball extends into the wider opening at the top of the receptacle.

Related Information:


Pins - Ball Lock - High Tension - Industrial
Pins - Ball Lock - High Tension - Industrial

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel shank. CRES440C stainless steel spindle. Four balls offer greater pullout strength. Also called detent pins.


Related Information:


Pins - Ball Lock - L-Handle - Industrial - Stainless Steel
Pins - Ball Lock - L-Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Also called detent pins.


Related Information:


Pins - Ball Lock - L-Handle - Industrial - Steel
Pins - Ball Lock - L-Handle - Industrial - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Also called detent pins.


Related Information:


Pins - Ball Lock - Marine Style - Half Ring
Pins - Ball Lock - Marine Style - Half Ring

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel.

Related Information:


Pins - Ball Lock - Marine Style - Recessed Head
Pins - Ball Lock - Marine Style - Recessed  Head

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel.

Related Information:


Pins - Ball Lock - Marine Style - Ring
Pins - Ball Lock - Marine Style - Ring

Also see combined categories:
All Ball Lock Pins - Marine Style

Quick release. Provide positive locking for all types of applications and equipment. Body, head and all internal components are made from corrosion resistant stainless steel. Also called detent pins.

303 Stainless Steel.

Related Information:


Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel
Pins - Ball Lock - Ring Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


Related Information:


Pins - Ball Lock - Ring Handle - Industrial - Steel
Pins - Ball Lock - Ring Handle - Industrial - Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Heat treated 4130 alloy spindle and shank. Handles aluminium unless noted otherwise. Also called detent pins.


Related Information:


Pins - Ball Lock - Shackle
Pins - Ball Lock - Shackle

Also see combined categories:
All Ball Lock Pins - Non Marine

Pins will not release until spindle is depressed. Four balls for high loads. Body and spindle are made from 4130 alloy steel. Also called detent pins.


Related Information:


Pins - Ball Lock - Shoulder Type - Ring Handle
Pins - Ball Lock - Shoulder Type - Ring Handle

Also see combined categories:
All Ball Lock Pins - Non Marine

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle. Also called detent pins.


Related Information:


Pins - Ball Lock - Shoulder Type - T Handle
Pins - Ball Lock - Shoulder Type - T Handle

Also see combined categories:
All Ball Lock Pins - Non Marine

Zinc plated C1144 pins with a shoulder that prevents the pin being inserted all the way to the handle. Tee handle. Also called detent pins.


Related Information:


Pins - Ball Lock - T-Handle - Commercial
Pins - Ball Lock - T-Handle - Commercial

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Stainless steel commercial pins provide strong locking and are perfect for less demanding applications where fastening and locating are needed. Tee handle. Also called detent pins.

Economical. Aluminium handles. 360 Brass Button. 300 Grade stainless pin. Use industrial grade T handled pins when higher double shear strength is required.

Related Information:


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Body and spindle 17-4 PH stainless steel. Ring and spring 17-7 MO stainless steel. Handle and collar are 300 grade stainless. Tee handle. Also called detent pins.


Related Information:


Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Stainless Steel and Aluminium

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. 17-4 PH or 15-7 MO Stainless Steel pins. Handles are aluminium alloy. Tee handle. Also called detent pins.


Related Information:


Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium
Pins - Ball Lock - T-Handle - Industrial - Steel and Aluminium

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Heat treated carbon and alloy steel. Aluminium handle. 440C stainless ball. 300 Grade stainless ring. Tee handle. Also called detent pins.


Related Information:


Pins - Ball Lock - T-Handle - Plastic Handle
Pins - Ball Lock - T-Handle - Plastic Handle

Also see combined categories:
All Ball Lock Pins - Non Marine

Quick release. Zinc plated C1144 steel pins with black plastic ball handles snd spring loaded balls. Quick alternative to cotter pins. Tee handle. Also called detent pins.


Related Information:


Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty
Pins - Ball Lock - T-Handle - Stainless Steel - Heavy Duty

Also see combined categories:
All Ball Lock Pins - Non Marine

17-4 PH or PH15-7MO stainless steel spindle and shank. Ground handling pins used in the handling of aircraft and service equipment. Tee handle. Also called detent pins.


Related Information:


Pins - Ball Lock - Threaded End - Stainless Steel
Pins - Ball Lock - Threaded End - Stainless Steel

Also see combined categories:
All Ball Lock Pins with Threaded End

One end threaded so you can attach your own handle or knob. Also called detent pins.


Related Information:


Pins - Clevis - Adjustable
Pins - Clevis - Adjustable

Also see combined categories:
All Clevis Pins - Adjustable

Multihole clevis pins for quick and easy adjustments

Made from 1010, 1018 or 1022 steel.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124352 products in 2772 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124352 products in 2772 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.