Small Parts & Bearings - an MBA company

O RINGS CATEGORIES


Pulleys Grooved


Pulleys - Geared - Hobby
Pulleys - Geared - Hobby

Also see combined categories:
All Flat Belt Pulleys

Small UPE grooved pulleys suitable for driving small o'rings or rubber bands. O-rings should be less than 2mm section diameter.



You may also be interested in

O-Rings


O-Rings - Quad
O-Rings - Quad

Also see combined categories:
All O-Rings

Quadrings or quattrorings reduce the amount of squeeze needed for positive seal, reducing friction and extending seal life.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Also known as quad rings.

Related Information:


O-Rings for Dental Applications


O-Rings - Dental
O-Rings - Dental


Special Orings for Dental Applications.

Special Orings for Dental Applications.

Related Information:


O-Rings


O-Rings - Cord
O-Rings - Cord


Nitrile, Fluoroelastomer and EPDM continuous length o-ring cord.

Nitrile: Temp Range: -30oC to +90oC / Fluoroelastomer: Temp Range -20oC to +240oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Nitrile: Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids. Fluoroelastomer (Viton(R)): Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis.

Related Information:


O-Rings - EPDM Rubber
O-Rings - EPDM Rubber

Also see combined categories:
All O-Rings

Suitable for heated water and steam.

Temperature Range: -55oC to +150oC. Chemically resistant to Hydraulic Fluids. Resistant to alcohols, glycol engine coolants and SKY-DROL (phosphate ester hydraulic fluid).

Related Information:


O-Rings - Fluoroelastomer
O-Rings - Fluoroelastomer

Also see combined categories:
All O-Rings

Viton(R) A for high temperature and chemical resistance.

Temperature Range: -20oC to +200oC. Suitable for synthetic and hydraulic fluids, strong acids, steam, many chemicals and many alkalis. Viton(R) is a registered trademark of Dupont Corporation. Viton is usually supplied brown, but black may be substituted when brown is unavailable.

Related Information:


O-Rings - Neoprene Rubber
O-Rings - Neoprene Rubber

Also see combined categories:
All O-Rings

Excellent resistance to ageing and weathering effects.

Temperature Range: -20oC to +100oC. Resistant to ozone and refrigeration chemicals such as freon 12 and 22. Moderate resistance to swelling in mineral oils, greases and water. Not resistant to aromatic compounds such as benzene, toulene, chlorinated hydrocarbons, esters, ethers or ketones.

Related Information:


O-Rings - Nitrile Rubber
O-Rings - Nitrile Rubber

Also see combined categories:
All O-Rings

General purpose. Includes o-rings for dental handpiece applications.

Temperature Range: -30oC to +90oC. Nitrile: Excellent resistance to mineral oil based fluids, hydrocarbon fuels, greases and water. Not suitable for aromatic hydrocarbons, chlorinated hydrocarbons, brake fluid and some fire resistant hydraulic fluids.

Related Information:


O-Rings - Silicone Rubber
O-Rings - Silicone Rubber

Also see combined categories:
All O-Rings

High thermal resistance and cold flexibility. Some dental applications are included in the listings. Commonly used in food appliactions.

Temperature Range: -70oC to +200oC. Good dialectric properties and resistance to ozone and oxygen attack. Retains flexibility at high and low temperatures. Poor strength and tear resistance. Poor resistance to oils, fuels, concentrated acids and alkalis, water and steam.

Related Information:


Bearings for Dental Equipment


Bearings - Dental Applications
Bearings - Dental Applications


See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.


Assortments


Assortment Kits - Various
Assortment Kits - Various


Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins



Pulleys Grooved


Pulleys - U Groove - Idler - Steel - With Bearing
Pulleys - U Groove - Idler - Steel - With Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Steel with Steel Ball Bearings

Use with round belts such as Rounthane or O-Rings.

Related Information:


Pulleys - U Groove - Plastic
Pulleys - U Groove - Plastic

Also see combined categories:
All U Groove Bearings and Pulleys

Acetal Body with Brass Insert. Use with O-Rings or Rounthane Belts.

Related Information:


Pulleys - U Groove - Idler - Plastic - With Ball Bearing
Pulleys - U Groove - Idler - Plastic - With Ball Bearing

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:


Pulleys - U Groove - Idler - Plastic - With Plain Bore
Pulleys - U Groove - Idler - Plastic - With Plain Bore

Also see combined categories:
All U Groove Bearings and Pulleys
All Idler Pulleys

Plastic and Steel with Steel Ball Bearings or Plain Bearings.

Use with round belts such as Rounthane or O-Rings.

Related Information:


Clamping Rings


Rings - Retaining - C Type External - For Linear Bearings
Rings - Retaining - C Type External - For Linear Bearings


Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.



Rings - Retaining - PR Type Internal - For Linear Bearings
Rings - Retaining - PR Type Internal - For Linear Bearings


Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.



Rings - Split - Stainless Steel
Rings - Split - Stainless Steel

Also see combined categories:
All Split Rings

316 stainless steel wire rings.



Rings - Split - Zinc Plated Steel
Rings - Split - Zinc Plated Steel

Also see combined categories:
All Split Rings

Zinc plated hard drawn steel wire rings.



Clips


Rings - Crescent
Rings - Crescent


Variation of an E-Clip with an open face. Also known as a C-Clip.

Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.

Related Information:


Rings - D - Nickel Plated
Rings - D - Nickel Plated


Nickel plated D Rings



Rings - Round - Nickel Plated
Rings - Round - Nickel Plated


Nickel plated round rings



Tolerance Rings


Rings - Tolerance
Rings - Tolerance


Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.


Hoist Rings


Rings - Hoist - Heavy Duty
Rings - Hoist - Heavy Duty

Also see combined categories:
All Hoist Rings

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.


Rings - Hoist - Heavy Duty - MIL-STD1365
Rings - Hoist - Heavy Duty - MIL-STD1365

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.


Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.


Rings - Hoist - Side Pull - External Wrench Mount
Rings - Hoist - Side Pull - External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Side Pull - Full Swivel
Rings - Hoist - Side Pull - Full Swivel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.

Individually pull tested and certified.


Rings - Hoist - Side Pull - Internal-External Wrench Mount
Rings - Hoist - Side Pull - Internal-External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Stationary - With Screws
Rings - Hoist - Stationary - With Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:


Rings - Hoist - With Ball Bearings
Rings - Hoist - With Ball Bearings

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.


Rings - Lift - Universal
Rings - Lift - Universal


For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.



Backup Rings


Rings - Backup
Rings - Backup


Durometer 90 Nitrile Rubber back up rings.



Clamping Rings


Spiral Rings - External - Heavy Duty
Spiral Rings - External - Heavy Duty

Also see combined categories:
All External Spiral Rings

AHE / WSM / AS3216 / RSN / MIL-R-27426A2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHE, Smalley: WSM, Spirolox and Ramsey: RSN, Aerospace: AS3216, MIL-R-27426A2.


Spiral Rings - External - Medium Duty
Spiral Rings - External - Medium Duty

Also see combined categories:
All External Spiral Rings

AE / WS / AS3218 / RS / MIL-R-27426A1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AE, Smalley: WS, Spirolox and Ramsey: RS, Aerospace AS3218, MIL-R-27426A1.


Spiral Rings - External - Medium-Heavy Duty
Spiral Rings - External - Medium-Heavy Duty

Also see combined categories:
All External Spiral Rings

AME / WST / RST - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AME, Smalley: WST, Spirolox and Ramsey: RST.


Spiral Rings - Internal - Heavy Duty
Spiral Rings - Internal - Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes AHI / WHM / AS3215 / Spirolox RRN / MIL-R-27426B2 - Spring Steel and Stainless Steel.

Heavy duty design for use with NAS669-670 deep grooves in applications like double row and tapered roller bearings. Requires no tools for removal. Equivalent to Associated Spring: AHI, Smalley: WHM, Spirolox and Ramsey: RRN, Aerospace AS3215, MIL-R-27426B2.


Spiral Rings - Internal - Light Duty
Spiral Rings - Internal - Light Duty

Also see combined categories:
All Internal Spiral Rings

Includes series CI / VH / UR - Spring Steel and Stainless Steel.

Light duty rings for use in low clearance applications. Also used as a positioning point for light loads. Radius notch on one end for removal. Narrow radial wall yields moderate thrust loads. Equivalent to Associated Spring: CI, Smalley: VH, Spirolox and Ramsey: UR.


Spiral Rings - Internal - Medium Duty
Spiral Rings - Internal - Medium Duty

Also see combined categories:
All Internal Spiral Rings

Includes AI / WH / AS3217 / RR / MIL-R-27426B1 - Spring Steel and Stainless Steel.

Popular series that will accommodate light and medium bearing series thrust loads. Available in military and aerospace specifications. Equivalent to Associated Spring: AI, Smalley: WH, Spirolox and Ramsey: RR, Aerospace AS3217, MIL-R-27426B1.


Spiral Rings - Internal - Medium-Heavy Duty
Spiral Rings - Internal - Medium-Heavy Duty

Also see combined categories:
All Internal Spiral Rings

Includes Series AMI / WHT / Spirolox RRT - Spring Steel and Stainless Steel.

Originally designed to fit NAS50-51 grooves, this series is a popular OEM specification. This two/three turn design is easier to install than the heavy duty RRN option. Equivalent to Associated Spring: AMI, Smalley: WHT, Spirolox and Ramsey: RRT.


Clips


Snap Rings - External - Basic
Snap Rings - External - Basic

Also see combined categories:
All External Snaprings

Includes series M3200 / SP / ESP / M2400 / SW snaprings. Similar to a circlip without the lugs.

Carbon sping steel. Used on the outside diameter of a bearing, shaft or similar equipment.


Snap Rings - Internal - Basic
Snap Rings - Internal - Basic

Also see combined categories:
All Internal Snaprings

M2300 / SB / ESB Snaprings. Like an internal circlip without the lugs.

Applications include gear systems, securing needle bearings and to act as spacers. Used on the inside bore diameter of a housing or similar.


Snap Rings - Internal - Stainless Steel
Snap Rings - Internal - Stainless Steel

Also see combined categories:
All Internal Snaprings

Internal snaprings are similar to an internal circlip without the lugs

301 S11/S22 Stainless Steel. Used on the inside bore diameter of a housing or similar.


Plungers - Spring - Ring Handle - Locking - Stainless
Plungers - Spring - Ring Handle - Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Locking - Steel
Plungers - Spring - Ring Handle - Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Non Locking - Stainless
Plungers - Spring - Ring Handle - Non Locking - Stainless

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic
Plungers - Spring - Ring Handle - Non Locking - Stainless-Phenolic

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Stainless body with phenolic nose

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Plungers - Spring - Ring Handle - Non Locking - Steel
Plungers - Spring - Ring Handle - Non Locking - Steel

Also see combined categories:
All Threaded Spring Plungers
All Handled Spring Plungers

Items shown with Long-Lok have a dry threadlocking sealant applied to thread.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124484 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124484 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.