Small Parts & Bearings - an MBA company

Nuts Lock Categories


Nuts - Lock - Tinnerman Palnut
Nuts - Lock - Tinnerman Palnut


Mechanical Copper Locknuts



Nuts - Hexagonal - Locking
Nuts - Hexagonal - Locking

Also see combined categories:
All Lock Nuts

By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.

Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.


Nuts - Aerotight
Nuts - Aerotight

Also see combined categories:
All Lock Nuts

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.


Nuts - Quick Release
Nuts - Quick Release

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.


Nuts - Hexagonal - Binx - Steel
Nuts - Hexagonal - Binx - Steel

Also see combined categories:
All Lock Nuts

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Nuts - Hexagonal - Weld - Steel
Nuts - Hexagonal - Weld - Steel

Also see combined categories:
All Lock Nuts

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.



Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:


Nuts - Hexagonal - Nylon Insert - Brass
Nuts - Hexagonal - Nylon Insert - Brass

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Nylon Insert - Steel
Nuts - Hexagonal - Nylon Insert - Steel

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Locknuts - Stainless Insert
Locknuts - Stainless Insert


Simplify the assembly and reduce costs involved in securing ball bearings. One piece item where the locking function is performed by a spring peened into the top of the nut.

Nut Body: Low Carbon Steel. Locking Insert: Stainless Steel Hardness HB 201-269. The spring bears on the flank of the shaft thread with force (P) generating reaction force (Pí) in the screw threads with a resulting high friction torque (prevailing torque). Unique slim body design. Secure locking without keyway and tab washer. One piece construction reduces stock and allows simpler, quicker assembly. Simple infinite adjustment. Re-usable up to 100 times. Resists vibration and shock. Equally effective for rotation in either direction even with rapid reversals.

Related Information:


Nuts - Hexagonal - Binx - Stainless Steel 304
Nuts - Hexagonal - Binx - Stainless Steel 304

Also see combined categories:
All Lock Nuts

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nuts - Hexagonal - Nylon Insert - Stainless Steel

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts Lock for Bearings


Nuts - Lock - For Bearings - Face
Nuts - Lock - For Bearings - Face

Also see combined categories:
All Lock Nuts for Bearings



Nuts - Lock - For Bearings - Peripheral
Nuts - Lock - For Bearings - Peripheral

Also see combined categories:
All Lock Nuts for Bearings





You may also be interested in

Plungers Indexing




Shock Absorbers


Shock Absorbers - Lock Nuts
Shock Absorbers - Lock Nuts

Also see combined categories:
All Shock Absorbers



Springs Disc


Washers - Disc Spring - Flange Locking Type
Washers - Disc Spring - Flange Locking Type

Also see combined categories:
All Disc Springs

Used under the nuts or bolt head in bolted flange joints that are subject to thermal or mechanical shock. Also known as belleville washers.

The discs deflect and move with the bolted joint. Helps to compensate for loosening that may develop preventing damage and leaks caused by thermal expansion, contraction and shock. Made from 17.7 PH Stainless Steel. Temperature range minus 220 to +300o Celsius. Load tolerance +/- 20% of load shown.


Plungers Indexing


Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut
Plungers - Indexing - Pull Knob - 303 Stainless - Locking Slot and Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob



Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut
Plungers - Indexing - Pull Knob - Steel - With Locking Slot and Nut

Also see combined categories:
All Indexing Plungers

With thermoplastic knob





Plungers - Indexing - Grip - Stainless - With Nut
Plungers - Indexing - Grip - Stainless - With Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.



Plungers - Indexing - Grip - Stainless - Without Nut
Plungers - Indexing - Grip - Stainless - Without Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.



Plungers - Indexing - Grip - Steel - With Nut
Plungers - Indexing - Grip - Steel - With Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.



Plungers - Indexing - Grip - Steel - Without Nut
Plungers - Indexing - Grip - Steel - Without Nut

Also see combined categories:
All Indexing Plungers

Grip is held in a notch in the fully retracted position. In this position the locking pin does not project from the body at all.



Clamps


Clamp Kits - Timing Belt
Clamp Kits - Timing Belt


Used for locking the ends of timing belt lengths used in linear applications

Suits single sided belts only. Aluminium. Screws, hex nuts and washers included.

Related Information:


Latches Quarter Turn


Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.


Shaftloc


Shaftloc-tm Sleeves - Single Ended
Shaftloc-tm Sleeves - Single Ended

Also see combined categories:
All Shaftloc

Simple effective way to lock components onto shafts.

416 Stainless Steel. Simple two part screw together system locks parts securely to shaft. Asymetric thread geometry produces a large radial clamping force when the nut is tightened.

Related Information:


Plungers Indexing


Plungers - Indexing - Cam Action - With Hex Nut
Plungers - Indexing - Cam Action - With Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:


Plungers - Indexing - Cam Action - Without Hex Nut
Plungers - Indexing - Cam Action - Without Hex Nut

Also see combined categories:
All Indexing Plungers

Used in many tooling applications as well as on many types of machinery and equipment.

Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.

Related Information:


Screws - Panel - Jack - Steel
Screws - Panel - Jack - Steel

Also see combined categories:
All Panel Screws

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.


Leadscrew Nuts - Metric - Square - Metallic
Leadscrew Nuts - Metric - Square - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.

Related Information:


Leadscrew Nuts - Metric - Round - Metallic
Leadscrew Nuts - Metric - Round - Metallic

Also see combined categories:
All Leadscrew Nuts
All Metric Leadscrew Nuts

Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.

Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.

Related Information:


Washers - Lock - Tabbed - Heavy Duty
Washers - Lock - Tabbed - Heavy Duty

Also see combined categories:
All Tabbed Lock Washers
All Lock Washers

Heavy duty WH / TW Series for bearing locknuts.

Carbon spring steel. Use with NH series locknuts.


Cross Blocks - Heavy Duty - Two Nuts
Cross Blocks - Heavy Duty - Two Nuts

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Cross Blocks - Heavy Duty - One Knob One Nut
Cross Blocks - Heavy Duty - One Knob One Nut

Also see combined categories:
All Cross Blocks
All Swivel Joints and Cross Blocks

Used for connecting two round rods at 90o.

Adjustments can be made by loosening the hand knob. Plastic knobs function independently for precise adjustment. Knobs have brass insert for easy turning and to prevent galling. Stainlesss steel eye bolt firmly clamps around adjusting rod for superior holding strength. Eyelet does not mar rod when tightened, resulting in smooth rod surface that easily slides through the cross block. No set screws required. Plastic or Stainless bodies accept 12.70 or 15.88mm rods.


Ballscrew - 16mm Nuts - Pillow Block
Ballscrew - 16mm Nuts - Pillow Block

Also see combined categories:
All Ball Screws

Includes ball nut. Match all components within the 16mm range only.

Antibacklash. Repeatability 0.01mm, accuracy 0.1mm/300mm when used with our 16mm screws. Hardened ground and polished Cf53 steel to HRC62 +/-2. Balls hardened HRC63 +/- 2.


Threadlockers
Threadlockers

Also see combined categories:
All Adhesives

ZAP, Molytec, Loctite, Pacer. Pipe sealant, low to high strength threadlockers. Hydraulic threadlocker. Wick-In. Stops threads loosening from vibration.



Assemblies - Locking - Flanged
Assemblies - Locking - Flanged

Also see combined categories:
All Locking Assemblies

Suitable for locking sprockets, pulleys, eccentric shafts.

Locks components with a bore of (D) to shafts with a diameter of (d). C60 Steel (060A62). Outer ring expands whilst inner ring contracts. Flange eliminates axial movement of secured component. During tightening of the screws, the hub must be able to perform axial movement. Clearance h8 / H8. Surface roughness Rt max 10um shaft / hub.


Elements - Locking
Elements - Locking

Also see combined categories:
All Locking Assemblies

2.4 to 2200 Nm, 6-80mm Bores

ETG 100 High Strength Steel for sizes up to 55mm bore. C60 Steel for sizes over 55mm bore. Recommended machining tolerances Shaft h8, Hub H8.


Handles - Lock - Round
Handles - Lock - Round

Also see combined categories:
All Lock Handles
All Handles

Satin Chrome with black plastic grip. Supplied with 2 keys.


Washers - Lock - External Tooth - Spring Steel
Washers - Lock - External Tooth - Spring Steel

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches.


Washers - Lock - External Tooth - Stainless Steel
Washers - Lock - External Tooth - Stainless Steel

Also see combined categories:
All External Tooth Lock Washers
All Lock Washers

Dimensions are nominal and may vary between batches.


Washers - Lock - Internal Tooth - Spring Steel
Washers - Lock - Internal Tooth - Spring Steel

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.


Washers - Lock - Internal Tooth - Stainless Steel
Washers - Lock - Internal Tooth - Stainless Steel

Also see combined categories:
All Internal Tooth Lock Washers
All Lock Washers

These are not the same as push on retaining rings. This product is not designed to grip a shaft. Search for push on retaining rings if that is what you require.

Dimensions are nominal and may vary between batches.


Washers - Lock - Split - Stainless Steel
Washers - Lock - Split - Stainless Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

304 Grade Stainless Steel



Washers - Lock - Split - Steel
Washers - Lock - Split - Steel

Also see combined categories:
All Split Lock Washers
All Lock Washers

Plain and zinc plated

Dimensions are nominal and may vary between batches.


Washers - Lock - Split - Titanium CP Grade 1
Washers - Lock - Split - Titanium CP Grade 1

Also see combined categories:
All Split Lock Washers
All Lock Washers

CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Dimensions are nominal and may vary between batches. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.


Retaining Compounds
Retaining Compounds

Also see combined categories:
All Adhesives

Molytec and Loctite. Includes Quickmetal. High and medium retaining for bearings, bushes, gears, pulleys and sprockets.


Related Information:


Plungers - Indexing - Locking - With Knob - 303 stainless Steel
Plungers - Indexing - Locking - With Knob - 303 stainless Steel

Also see combined categories:
All Indexing Plungers

Used to prevent change in locking position due to shearing force. Spring loaded for use in fastening, locating and indexing on equipment, tooling and other applications.

303 Stainless Steel.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124352 products in 2772 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124352 products in 2772 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.