Small Parts & Bearings - an MBA company

Nuts Blind Categories


Nuts Specialty


Nuts - Blind
Nuts - Blind

Also see combined categories:
All Nuts

Blind nuts - Tee nuts.

Put steel threads in soft materials like wood without counterboring.


Thread Inserts


Inserts - Rivet Nuts - Klik - Ribbed
Inserts - Rivet Nuts - Klik - Ribbed

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These blind threaded inserts offer strong torque and pull out characteristics. Especially effective in sheet metal and other thin material. Insert is placed into the hole in the parent material and crimped up with the installation tool. Installs from one side - no tapping required. Installs almost flush eliminating the need for countersinking. Made from plated steel.

Related Information:


Inserts - Rivet Nuts - Klik - Threadsert
Inserts - Rivet Nuts - Klik - Threadsert

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Can be used in almost any material over 2.38mm thick. As the insert is installed the threaded section is completely swaged into the sleeve portion of the hole, permitting them to be used with grade 8 screws. The installation hole size is determined by the density of the parent material. Can be pressed or otherwise compressed manually with a hammer for quick installation jobs in sheet material. Tools are available for assembly in blind holes or production assembly. Email us for a price on tools.


Inserts - Rivet Nuts - Klik - Standard
Inserts - Rivet Nuts - Klik - Standard

Also see combined categories:
All Klik Rivet Nuts

Individual Inserts for use with the Klik Thread Setter Tool

These threaded inserts can be used in blind or through hole applications. Featuring a heavy duty thread profile and increased thickness in the collapse area. Steel with cadmium plating.

Related Information:


You may also be interested in

Knobs Cross


Knobs - Cross - Blind - Female
Knobs - Cross - Blind - Female

Also see combined categories:
All Cross Knobs
All Knobs



Knobs Tri


Knobs - Tri - Blind Hole
Knobs - Tri - Blind Hole

Also see combined categories:
All Tri Knobs
All Knobs



Knobs Lobe


Knobs - Three Lobe - Blind Hole - Solid Top - Female
Knobs - Three Lobe - Blind Hole - Solid Top - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Magnets Ceramic


Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Latches Handle


Handles - Latching - T-Handle - Folding
Handles - Latching - T-Handle - Folding

Also see combined categories:
All T Handles

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.



Pins - Dowel - Extractable
Pins - Dowel - Extractable

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6. Din 7979.

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin to overcome the problem of pressure build up by trapped air. Hardness 55-62 HRC, HV550-650. Extractable pins may or may not have a flat to vent pressure when pulling. Also known as parallel pins.

Related Information:


Pins - Dowel - Extractable - With Vent
Pins - Dowel - Extractable - With Vent

Also see combined categories:
All Dowel Pins

Hardened and Ground Steel 100 Cr6 with a ground flat along one edge

Extractable dowels have a thread tapped in the end to fascilitate removal from blind holes. An air release flat is ground along the full length of the pin. Hardness 55-62 HRC, HV550-650. Also known as parallel pins.

Related Information:


Knobs - Star - Female - Soft
Knobs - Star - Female - Soft

Also see combined categories:
All Star Knobs

Also see lobe knobs

Special high impact strength black technopolymer, covered with soft-touch elastomer chemically bonded (hardness 70 Shore A). Resistant to solvents, oils, greases and other chemical agents. brass insert with tapped blind hole.




Nuts - Cap - Stainless Steel
Nuts - Cap - Stainless Steel

Also see combined categories:
All Nuts

Stainless Steel. Lower profile than a dome nut.



Nuts - Dome - Nylon
Nuts - Dome - Nylon

Also see combined categories:
All Nuts

Natural Nylon.



Nuts - Dome - Stainless Steel
Nuts - Dome - Stainless Steel

Also see combined categories:
All Nuts

Stainless Steel.



Nuts - Dome - Steel
Nuts - Dome - Steel

Also see combined categories:
All Nuts

Mild Steel, chrome and zinc plated



Nuts - Hexagonal - Aluminium
Nuts - Hexagonal - Aluminium

Also see combined categories:
All Nuts

METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:


Nuts - Hexagonal - Brass
Nuts - Hexagonal - Brass

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Nuts marked as type SCALE have the same dimension across flats as the brass hex head screw of the same thread size.


Nuts - Hexagonal - Collar
Nuts - Hexagonal - Collar

Also see combined categories:
All Nuts



Nuts - Hexagonal - Half - Stainless Steel
Nuts - Hexagonal - Half - Stainless Steel

Also see combined categories:
All Nuts

UNC - UNF - METRIC

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Nylon
Nuts - Hexagonal - Nylon

Also see combined categories:
All Nuts

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Nylon - Self Tapping
Nuts - Hexagonal - Nylon - Self Tapping

Also see combined categories:
All Nuts

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Stainless Steel
Nuts - Hexagonal - Stainless Steel

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC - BSW - Course - Fine - Extra Fine.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Steel
Nuts - Hexagonal - Steel

Also see combined categories:
All Nuts

UNC - UNF - BA - METRIC. Plain and Zinc Plated.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Titanium - CP Grade 1
Nuts - Hexagonal - Titanium - CP Grade 1

Also see combined categories:
All Nuts

Metric Only. CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.


Nuts - Hexagonal - Titanium - Ti-Gr5 - Ti-6Al4v
Nuts - Hexagonal - Titanium - Ti-Gr5 - Ti-6Al4v

Also see combined categories:
All Nuts

Metric. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. Used in critical aircraft structural components. UNS R56400. If the A and H dimensions are critical for your application please consult us prior to ordering. Composition Percentage: Al 5.5-6.75, V 3.5-4.5, N 0.05, C 0.08, H 0.015, Fe 0.40, O 0.2, Ti Balance. Grade 5 6Al-4V is a high strength titanium alloy. Tensile Strength 91.5kgf / mm2. Yield Strength 84.5kgf / mm2. Elongation 10 Percent.


Nuts - Aerotight
Nuts - Aerotight

Also see combined categories:
All Lock Nuts

Aerotight is a Registered Trademark and can only be applied to goods manufactured by the Premier Screw and Repetition Company Limited. Any company infringing the registered trade mark may be liable to legal proceedings. Aerotight nuts should not be used on damaged or interrupted threads. When assembled on the screw at least two threads should protrude through the Aerotight nut. Advantages: Will not work loose. No other locking device needed.


Nuts - Hexagonal - Binx - Stainless Steel 304
Nuts - Hexagonal - Binx - Stainless Steel 304

Also see combined categories:
All Lock Nuts

Manufactured from A2 302/304 grade stainless steel. The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Nuts - Hexagonal - Binx - Steel
Nuts - Hexagonal - Binx - Steel

Also see combined categories:
All Lock Nuts

The standard Binx's entire locking action is contained within the nut body which is no thicker than a standard full nut. The ingenious design incorporates two opposing cantilever type springs which lock onto the bolt with inward and downward pressure. May be removed and placed repeatedly with minimum thread wear.


Nuts - Hexagonal - Locking
Nuts - Hexagonal - Locking

Also see combined categories:
All Lock Nuts

By applying torque to the locking screw, a press fit or wave spring effect is created locking female threads of the locknut to the male threads of the shaft.

Produces a strong metal to metal lock. Locking set screws do not protrude through the face of the threads of the locknut, eliminating damage to shaft.


Nuts - Hexagonal - Nylon Insert - Aluminium
Nuts - Hexagonal - Nylon Insert - Aluminium

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:


Nuts - Hexagonal - Nylon Insert - Brass
Nuts - Hexagonal - Nylon Insert - Brass

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. Not NylocTM brand.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Nylon Insert - Stainless Steel
Nuts - Hexagonal - Nylon Insert - Stainless Steel

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Nylon Insert - Steel
Nuts - Hexagonal - Nylon Insert - Steel

Also see combined categories:
All Lock Nuts

Nylon Insert for Locking. NylocTM and other brands.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.


Nuts - Hexagonal - Weld - Steel
Nuts - Hexagonal - Weld - Steel

Also see combined categories:
All Lock Nuts

Used in metalwork or for leveling appliances. Round or slab base. Material thickness is the thickness of the flange.



Nuts - Lock - Tinnerman Palnut
Nuts - Lock - Tinnerman Palnut


Mechanical Copper Locknuts



Nuts - Quick Release
Nuts - Quick Release

Also see combined categories:
All Lock Nuts

UNC

Carbon steel, black oxide finish. Button Thread nuts allow quick fixturing on long thread lengths. Simply press the button and the threads are disengaged to allow easy movement up or down the screw. Release the button and the threads engage for normal turning.


Nuts - Lock - For Bearings - Face
Nuts - Lock - For Bearings - Face

Also see combined categories:
All Lock Nuts for Bearings



Nuts - Lock - For Bearings - Peripheral
Nuts - Lock - For Bearings - Peripheral

Also see combined categories:
All Lock Nuts for Bearings





Nuts - Flanged - Serrated - Stainless Steel
Nuts - Flanged - Serrated - Stainless Steel

Also see combined categories:
All Nuts

Stainless Steel.



Nuts - Square - Machine Screw
Nuts - Square - Machine Screw


For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards



Nuts - Thumb
Nuts - Thumb

Also see combined categories:
All Nuts
All Thumb Nuts



Nuts - Thumb - Collared - Brass
Nuts - Thumb - Collared - Brass

Also see combined categories:
All Nuts
All Thumb Nuts



Nuts - Thumb - Collared - Stainless
Nuts - Thumb - Collared - Stainless

Also see combined categories:
All Nuts
All Thumb Nuts



Nuts - Wing - Brass
Nuts - Wing - Brass

Also see combined categories:
All Nuts
All Wing Nuts

Brass Wing Nuts - A Pattern B18.17


Related Information:


Nuts - Wing - Malleable Iron - Style A
Nuts - Wing - Malleable Iron - Style A

Also see combined categories:
All Nuts
All Wing Nuts

Malleable iron with a tumbled finish.



Nuts - Wing - Malleable Iron - Style B
Nuts - Wing - Malleable Iron - Style B

Also see combined categories:
All Nuts
All Wing Nuts

Malleable iron with a tumbled finish.



Nuts - Wing - Malleable Iron - Style C
Nuts - Wing - Malleable Iron - Style C

Also see combined categories:
All Nuts
All Wing Nuts

Malleable iron with a tumbled finish.



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.