Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Mounts Machinery Categories
Mounts - Machinery - Industrial - Heavy Duty
High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.
For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking.
Related Information:
Mounts - Machinery - Industrial - Medium Duty
High strength machined components. Rapid installation and leveling. 80% vibration reduction. Vertical and horizontal isolation.
For milling mchines, presses, injection molding, packaging machines. Industrial machine mount designed with high strength construction for reduction of both shock and vibration. Prevents vibration from affecting other machines and protects mounted equipment from external vibration effects. Provides precision leveling with large support plate and meets OSHA standards by preventing machinery walking.
Related Information:
Mounts - Machinery - Industrial - Pneumatic Elastomeric
Well suited for applications requiring high deflection isolation. Vibration can be reduced as much as 90%. High stability horizontal to vertical stiffness ratio 1 to 1.
Heavy wall construction. Significant shock loads are deflected to the outer wall of the mount. Will not bottom out if properly installed. Will continue to support and isolateeven with no air pressure. Leveling is easily accomplished by adding or removing air.
Related Information:
Mounts - Compression
Used for vertically applied loads to prevent the transmission of noise and vibration caused by rotation of unbalanced equipment.
Made with durable oil and ozone resistant neoprene. No special tools required for installation.
Related Information:
Mounts - Neoprene Pads - Ribbed Pattern
Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.
Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.
Related Information:
Mounts - Neoprene Pads - Waffle Pattern
Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.
Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Oil resistant neoprene rubber.
Related Information:
Feet - Mounting - Bonded Neoprene - No Stud
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
Feet - Mounting - Bonded Neoprene - With Stud
Mounting feet let you isolate all types of machinery and equipment from vibration and floor motion.
You may also be interested in
Isolators
Mounts - Vibration - Isolation Pads - General Purpose
For installation of industrial machinery where the ratio of shear loads to vertical loads is less than or equal to 1 to 5.
Base is unthreaded. The stud rests on the pad and is not threaded in or fastened to the pad. Self aligning feature compensates for uneven floors without sacrificing stability. Scientifically designed diamond suction cells of the neoprene insert firmly anchor the machine to the floor. Recommended for a wide range of industrial machinery and equipment where simple precise leveling is required. 25.4mm level adjustment.
Related Information:
Mounts Leveling
Mounts - Leveling - Machine - Cushioned
Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.
High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.
Related Information:
Mounts Wedge
Mounts - Wedge - Heavy Duty
For installation and precise leveling of heavy industrial machinery.
Three machined wedges are mounted and held together by a horizontal adjusting bolt. A lock screw ensures the mount in the leveled position. Keys in the sliding surface of the wedges ensure rigidity within the mount construction. A special opening allows for bolting of the machine to the floor. Maximum leveling is 6.35mm.
Related Information:
Adjusters
Adjusters - Tilt
Adjustable supports for all kinds of machinery. Mounting feet levelers.
Stem: Mild steel bright zinc plated. Base: Polythene or Polypropylene. Angle of Tilt: 25o from perpendicular. Hexagon Nut: 12mm A/F. Standard colour: Black.
Related Information:
Mounts Leveling
Mounts - Leveling - Light Duty - Nylon Base
Light duty perfect for furniture and small machinery leveling. Adjusters.
Sturdy nylon plastic base. Zinc plated steel stem.
Related Information:
Adjusters
Adjusters - Rigid
Adjustable supports for all kinds of machinery.
Mild steel bright zinc plated. Screwdriver cross recess in base. Use as mounting feet.
Related Information:
Mounts Leveling
Mounts - Leveling - Anti-Vibration - Studded Type
Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery. Adjusters.
15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish.
Related Information:
Mounts - Leveling - Steel - Industrial - With Elastomer Pad
These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.
Clear zinc plated steel. Elastomer pad for non skid applications.
Related Information:
Mounts - Leveling - Steel - Industrial - With Nylon Pad
These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.
Clear zinc plated steel. Nylon pad for glide applications.
Related Information:
Mounts - Leveling - 303 Stainless - Industrial - With Acetal Pad
These industrial glides are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.
303 Stainless Steel. Nylon pad for glide applications.
Related Information:
Mounts - Leveling - 303 Stainless - Industrial - With Elastomer Pad
These industrial mounts are an excellent and inexpensive solution for light duty applications such as office furniture, shelving, point of sale displays, cabinetry and small machinery. Adjusters.
303 Stainless Steel. Elastomer pad for non skid applications.
Related Information:
Catalogues
Hardcopy, CD and PDF catalogues. Including the popular Machinery Handbook.
Information to assist in the selection of our products.
Related Information:
Bushes - Aluminium Bronze - Flanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
Bushes - Aluminium Bronze - Unflanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
Bushes - Aluminium Bronze - Graphite Plug - Flanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
Bushes - Aluminium Bronze - Graphite Plug - Unflanged
Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.
ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.
Related Information:
Shims - Slotted - Imperial Sizes
Precision stainless steel 300 series. Solves alignment and leveling problems on pumps, generators and other machinery. Tabs eliminate need to place hands under machinery. Conform to standard bolt and stud sizes.
Plungers - Indexing - Cam Action - With Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
Plungers - Indexing - Cam Action - Without Hex Nut
Used in many tooling applications as well as on many types of machinery and equipment.
Plunger is retracted as the nadle is turned on the cam of the body. Groove on top of cam locks the plunger into retracted position. Body made from black oxide coated steel. Plunger is made from steel, ground and nitrided.
Related Information:
Shims - Rubber
Handy non marring soft spacer shims in a wedge shape
Level and stabilise appliances, desks, tables, filing cabinets, machinery. Stackable. Vibration cushioning. Ribs ensure that wedges grab tight and stay in place. Black ridid wedges can support up to 2000 lbs. White flexible wedges can be trimmed with a utility knife.
Mounts - Buffer - Male - Conical
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Related Information:
Mounts - Buffer - Special Purpose
Vibration dampening
Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).
Related Information:
Mounts - Universal - For Acme Thread and Ballscrews
Use grade 8 hex socket head cap screws for mounting.
Related Information:
Mounts - Vibration Isolating - Tee Bushes
Vibration isolation for mobile and static applications involving plate clamping
Reduces structure borne noise and absorbs shock forces. Low profile height.
Related Information:
Mounts - Vibration - Isolation - Compression - Stainless Steel
Compression shear mounts for harsh environments.
Excellent protection against shock vibration and noise4 in compression and shear applications. Developed especially for applications in harsh environments in food and pharmaceutical industries. High dampening characteristics. Stainless top plate is domed to guard against oil contamination. Low profile. Compact design. Elastomer insert is made from highly chemical resistant nitrile with good deflection properties. Concentric rings in the base of the insert firmly anchor machine to the floor.
Related Information:
Mounts - Vibration - Isolation - Cup Style 2
Industrial cupmounts provide excellent protection against severe impact shock, vibration and noise.
High vibration dampening. Fail safe, rugged interlocking metal and neoprene construction. Metal cupmount is cold rolled steel. Low profile compact design. Metal top plate is domed shape to guard against oil contamination. High grade neoprene elastomer provides resistance to ozone and oils.
Related Information:
Mounts - Vibration - Isolation Pads - Compression Shear
Durable, high quality mount combines effective compression and shear isolation from vibration and shock with the convenience of an internal leveling device.
Deep cavity design allows excellent vibration and shock control in both the vertical and horizontal directions. Heavy duty ductile iron cover and chemically resistant neoprene insert. Internal leveling device levels up to 12.7mm. Specially designed recess on top of cover hosues a rubber washer. Concentric rings on base of neoprene insert prevents walking or creeping. Ideal for lathes, milling machines, punch presses, printing machines, shears, brakes, injection moulding machines, grinders etc. Includes all necessary hardware.
Related Information:
Mounts - Bonded - Two Piece
Steel insert overcoated with rubber joins the two pieces.
Related Information:
Mounts - Centre Bolt - Solo Unitised
Vibration dampening. Also known as T Bushes or Bonded Mounts.
Calculate static load and select a mount of equal or greater capacity. For dynamic loads of 3 x static load select the next larger size. Lubricate mount and socket with water or rubber lubricant. Insert into socket and hand rotate with axial force. Outer Body : Natural Rubber / Spacer : Rolled Tubular Steel.
Related Information:
Mounts - Cupmounts - Industrial
Protext against severe impact shock with efficient vibration isolation characteristics at frequencies above 40Hz.
Can be mounted in any orientation for protection of sensitive electronic, electrical and mechanical equipment from high impact shocks.
Related Information:
Mounts - Bobbin - Male - Square Base
Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening
Fastener may be steel, brass or zinc plated. Natural Rubber isolator.
Related Information:
Mounts - Anti-Vibration - 303 Stainless Steel
Corrosion resistant designed with high grade nitrile rubber and stainless steel.
Swivel movement plus or minus 7o for stable support on inclined floors. Nitrile rubber base helps ensure stability.
Related Information:
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 126998 products in 2361 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
