Covid-19 Update!! Current supply status.
Trading by online order and email.
Outbound Deliveries: Allow a few extra days for both Australian and overseas deliveries.
Pre-orders and Backorders: Allow a few extra days due to quarantine precautions.
Mounts Leveling Categories
Mounts - Leveling - Nylathane - Studded Type - Single Lag Hole
Max load 3200kg. Adjusters.
Related Information:
Mounts - Leveling - Nylon - Studded Type - Loc-A-Lign - No Lag Holes
Adjusters.
Related Information:
Mounts - Leveling - Nylon - Studded Type - Loc-A-Lign - With Lag Holes
Adjusters.
Related Information:
Mounts - Leveling - Rubber Pads
For use with thermoplastic leveling mounts. Adjusters.
Related Information:
Mounts - Leveling - Stud Type - Acme Thread - Stainless Steel
303 Stainless Steel. Adjusters.
Related Information:
Mounts - Leveling - Thermoplastic
Economical choice for a wide range of applications. Adjusters.
Base is made from reinforced thermoplastic. Threaded stem is steel. Optional non skid rubber pads available separately.
Related Information:
Mounts - Leveling - Nylon - Studded Type - With Lag Holes
Steel and stainless steel threads. Adjusters.
Related Information:
Mounts - Leveling - Machine - Cushioned
Reduces noise and vibration on heavy machinery, compressors and presses. Adjusters.
High strength aluminium alloy mounting plate is embedded in each pad with two tapped mounting holes for installation on all types of machines. The elastomer compound used in these pads is highly resistant to oil and chemicals. 1/2 UNC thread cold forged x 2.5 inch bolt supplied with each mount. Thousands of tiny suction pockets on the bottom prevent the machine from walking or slipping out of position.
Related Information:
Mounts - Leveling - Vibration Pads - Rubber
Use with nyon leveling bases to provide extra grip. Adjusters.
Related Information:
Mounts - Leveling - Light Duty - Nylon Base
Light duty perfect for furniture and small machinery leveling. Adjusters.
Sturdy nylon plastic base. Zinc plated steel stem.
Related Information:
Mounts - Leveling - Stud Type - Black
For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.
Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball.
Related Information:
Mounts - Leveling - Stud Type - Stainless Steel - Imperial
Good quality with value pricing. 303 stainless steel. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
Mounts - Leveling - Stud Type - Stainless Steel - Metric
Good quality with value pricing. 303 stainless steel. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
Mounts - Leveling - Socket Type - 316 Stainless Steel
For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Acme Thread - Gold Chromate
Use your own acme thread to make a custom stud. Adjusters.
Related Information:
Mounts - Leveling - Stud Type - Gold Chromate
For leveling machine tools, electronic racks, benches etc on uneven surfaces. Adjusters.
Load is distributed over 120o of full radial contact rather than a single radial contact point, providing greater weight distribution between the ball and pad. Zinc plated steel with case hardened ball.
Related Information:
Mounts - Leveling - Nylon - Socket Type - No Lag Holes
Steel and stainless steel socket internal threads. Use your own custom thread length. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel
Use your own acme thread to make a custom stud. 303 Stainless Steel. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Gold Chromate
For leveling machine tools, electronic racks, benches etc on uneven surfaces. Use your own stud. Adjusters.
Related Information:
Mounts - Leveling - Anti-Vibration - Studded Type
Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery. Adjusters.
15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish.
Related Information:
Mounts - Leveling - Stud Type - Gold Chromate - Imperial
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
Mounts - Leveling - Stud Type - Gold Chromate - Metric
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
Mounts - Leveling - Stud Type - Nickel Plated - Imperial
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
Mounts - Leveling - Stud Type - Nickel Plated - Metric
Good quality with value pricing. Hardened ball for high load ratings and excellent wear characteristics. Adjusters.
Large diameter base for added support. 15o off centre swivel for quick leveling on sloped surfaces.
Related Information:
Mounts - Leveling - Hygienic - 304 Stainless Steel
ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.
Related Information:
Mounts - Leveling - Hygienic - Anchoring - One Hole
ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.
Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.
Related Information:
Mounts - Leveling - Hygienic - Anchoring - Two Hole
ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.
Operating temperature -20 to 100o C. Rubber base meets FDA 177-2600. 5o swivel for good floor contact.
Related Information:
Mounts - Leveling - Hygienic - Anchoring - Low Profile - High Swivel
ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.
Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 12o swivel.
Related Information:
Mounts - Leveling - Hygienic - Anchoring - Low Profile - Low Swivel
ANSI 304 stainless steel provides high corrosion resistance. Rounded polished base for fluid run-off during washdown applications. Adjusters.
Operating temperature -20 to 100o C. Wrench flats in thread still allow for full use of threaded section. 1o swivel.
Related Information:
Mounts - Leveling - Socket Type - Black
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Elastomer Base - OSHA Yellow Steel Cover
Protects general metalworking processes equipment including punch presses, milling machines, lathes, mixers, injection moulding machines, grinders from shock and vibration. Adjusters.
Simplifies installation. 63.5mm of neoprene provides controlled deflections under load. High isolation efficiency for vibration and shock forces, and reduction of transmitted sound. Adjustable up to 12.7mm above loaded height by a few turns of the leveling bolt and tightening the checknut. Corrosion resistant outer housing provides high strength. Neoprene elastomer resists oil, grease, ozone and caustics. Zinc plated hardware resists rust. Hex head bolt and locknut finished with mounts. Height dimensions indicate free height of mount under no load.
Related Information:
Mounts - Leveling - Padded - Light Duty - With Elastomer Pads
For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc. Adjusters.
For non skid applications.
Related Information:
Mounts - Leveling - Padded - Light Duty - With Nylon Pads
For light duty leveling applications. Can be used on furniture, light duty machines, tables, cabinets, light weight equipment etc. Adjusters.
For glide applications.
Related Information:
Mounts - Leveling - Socket Type - 303 Stainless Steel
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - 303 Stainless Steel 2
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - 303 Stainless - With Acetal Pad
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - 303 Stainless - With Pad
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - 316 Stainless - With Pad
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Gold Chromate 2
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Nickel Plated Steel. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel - Black Chromate
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel - Black Chromate - With Pad
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel - Clear Chromate
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel - Clear Chromate - With Pad
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel - Gold Chromate
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel - Gold Chromate 2
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel - Gold Chromate - With Pad
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Steel - Nickel Plated
15o swivel off centreline to adjust to uneven surfaces and level machine tools, electronic racks and benches. Adjusters.
Related Information:
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 126914 products in 2518 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
