Small Parts & Bearings - an MBA company

Mounts Cylindrical Square Categories


Mounts Cylindrical


Mounts - Cylindrical - Square
Mounts - Cylindrical - Square

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.


Mounts - Cylindrical - Female to Blank
Mounts - Cylindrical - Female to Blank

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Related Information:


Mounts - Cylindrical - Female to Female
Mounts - Cylindrical - Female to Female

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Related Information:


Mounts - Cylindrical - Male to Blank - Conical
Mounts - Cylindrical - Male to Blank - Conical

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening



Mounts - Cylindrical - Male to Blank - Flat Top
Mounts - Cylindrical - Male to Blank - Flat Top

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Related Information:


Mounts - Cylindrical - Male to Female
Mounts - Cylindrical - Male to Female

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Related Information:


Mounts - Cylindrical - Male to Male
Mounts - Cylindrical - Male to Male

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening


Related Information:


Mounts - Cylindrical - Special Purpose
Mounts - Cylindrical - Special Purpose

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).


You may also be interested in

Bumpers


Bumpers - Cylindrical - Female - Neoprene
Bumpers - Cylindrical - Female - Neoprene

Also see combined categories:
All Cylindrical Bumpers



Bumpers - Cylindrical - Female - Urethane
Bumpers - Cylindrical - Female - Urethane

Also see combined categories:
All Cylindrical Bumpers



Bumpers - Cylindrical - Male - Neoprene
Bumpers - Cylindrical - Male - Neoprene

Also see combined categories:
All Cylindrical Bumpers



Bumpers - Cylindrical - Male - Urethane
Bumpers - Cylindrical - Male - Urethane

Also see combined categories:
All Cylindrical Bumpers

Used to guard, stop, align, position and protect parts.





Bumpers - Cylindrical - Rubber
Bumpers - Cylindrical - Rubber

Also see combined categories:
All Cylindrical Bumpers

Built in steel screw for easy instrallation. Made with abrasion resistant SBR rubber. Resistant to abrasion and oxidation. Excellent cushioning and vibration control.

Non staining, non marring polyurethane. Sold by the pad - number of bumpers per pad shown in the listings. Peel off and apply. Clear. 60-70 Shore A hardness.




Plungers Ball


Sleeves - Cylindrical - Precision Indexing Plunger
Sleeves - Cylindrical - Precision Indexing Plunger

Also see combined categories:
All Sleeves for Plungers

Use with precision indexing plungers and locking bolts



Magnets - Alcomax - Cylindrical Bar
Magnets - Alcomax - Cylindrical Bar

Also see combined categories:
All Magnets
All Alcomax Magnets

No keepers



Bumpers - Square and Rectangle
Bumpers - Square and Rectangle

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Neoprene only, no steel plate.



Bumpers - Square and Rectangle - Steel Plated - Neoprene
Bumpers - Square and Rectangle - Steel Plated - Neoprene

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Neoprene bonded to steel plate.



Bumpers - Square and Rectangle - Steel Plated - Urethane
Bumpers - Square and Rectangle - Steel Plated - Urethane

Also see combined categories:
All Square Bumpers
All Bumpers

With drilled and counterbored holes for mounting. Urethane bonded to steel plate.



Rollers - Steel
Rollers - Steel

Also see combined categories:
All Rollers

Hardened Steel Rollers as used in Cylindrical and Needle Roller Bearings

Hardened Steel Rollers as used in Cylindrical and Needle Roller Bearings.

Related Information:


Sleeving - Mesh
Sleeving - Mesh


Low cost protection for threaded and cylindrical parts

Elastic snug tight fit protective sleeve fits over straight, tapered or contoured parts. Made from polyethylene. Thickness of web approx 1.8mm. Sold per foot (300mm). Maximum contunuous roll is 100 feet (30 mtrs).


Suspension Units - Rubber - Square - Insert Type
Suspension Units - Rubber - Square - Insert Type

Also see combined categories:
All Suspension Units

Housing: Steel / Rubber: Black, hardness 70 Shore. Inner square section: Steel tube for mounting plug-in lever arms on one or both sides. All metal parts are paint-finished. Maximum Working Angle: +/-30o. Operating Temperature Range: -40oC to +80oC.


Handles - Latching - T-Handle - Folding
Handles - Latching - T-Handle - Folding

Also see combined categories:
All T Handles

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.



Tips - Round
Tips - Round


Plastic tips fit over outside of tubing.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene. Tips may be supplied tapered or cylindrical depending on stock availability.


Mounts - Neoprene Pads - Ribbed Pattern
Mounts - Neoprene Pads - Ribbed Pattern

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.


Slides - Linear - Cross Roller Rail
Slides - Linear - Cross Roller Rail

Also see combined categories:
All Linear Slides

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds.


Linear Slide Assemblies - Plain - Low Profile - High Load
Linear Slide Assemblies - Plain - Low Profile - High Load

Also see combined categories:
All Linear Slide Assemblies

High capacity, square gib slides are ideal for precision machine tool applications.

The square gib design offers high load capacity and accuracy and withstands force in any direction. Gib is adjustable. Straight line accuracy 0.00254mm. Base is fabricated from A2 tool steel and hardened to Rc58-62. Saddle or riding portion of the slide is fabricated from low carbon steel and can be drilled, tapped and milled for mounting purposes. All slides feature Rulon bearing material for low friction. Stick-slip is virtually non existent as friction at startup and low speeds is virtually eliminated. No lubrication required. Rulon is practically inert to acids, bases and solvents making these slides a good choice for contaminated environments. Temp range minus 240 oC to +300 Deg C.


Square Bar - Brass
Square Bar - Brass

Also see combined categories:
All Metal Bar - Square

Saw Cut Ends. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries. Smaller sizes may not be supplied straight.


Square Bar - Urethane
Square Bar - Urethane

Also see combined categories:
All Non Metallic Bar - Square

Hard urethane rubber compound. Machinable. Length +/- 3.2mm. Length +/- 2 percent.


Bearings - Square Groove Profile OD
Bearings - Square Groove Profile OD


Special bearings. Not readily available.



Nuts - Square - Machine Screw
Nuts - Square - Machine Screw


For space limited applications. Metts or exceeds ANSI/ASME B18.6.3 standards



Sleeves - Square Hole - Plain - Carbon Steel
Sleeves - Square Hole - Plain - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.



Sleeves - Square Hole - Plain - Hardened
Sleeves - Square Hole - Plain - Hardened

Also see combined categories:
All Square Hole Sleeves

Pre hardened to Rockwell 23-30C. Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through.



Sleeves - Square Hole - Threaded - Carbon Steel
Sleeves - Square Hole - Threaded - Carbon Steel

Also see combined categories:
All Square Hole Sleeves

Square and concentric to 0.076mm (0.003in). Round OD with with a uniform square hole all the way through and threaded internally at one end.



Washers - Square - Heavy Duty - 304 Stainless Steel
Washers - Square - Heavy Duty - 304 Stainless Steel

Also see combined categories:
All Square Washers



Washers - Square - Heavy Duty - Steel
Washers - Square - Heavy Duty - Steel

Also see combined categories:
All Square Washers



Bungs - Square
Bungs - Square


Plastic bungs fit inside square tube.

Other colours available on request. Minimum quantities will apply. Made from tough polyethylene.

Related Information:


Bungs - Square - Threaded
Bungs - Square - Threaded


Square tubing end inserts with a thread



Tube - Square - Aluminium
Tube - Square - Aluminium

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:


Tube - Square - Brass
Tube - Square - Brass

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:


Tube - Square - Carbon Fibre - Round Hole
Tube - Square - Carbon Fibre - Round Hole

Also see combined categories:
All Non Metallic Tube - Square

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Tube - Square - Carbon Fibre - Square Hole
Tube - Square - Carbon Fibre - Square Hole

Also see combined categories:
All Non Metallic Tube - Square

High impact light weight carbon fibre tubing for modelling.

Pultruded carbon fibre with a smooth epoxy coated finish. Items marked as Low Grade may have tolerance variations up to 0.2mm.


Housings - Bearing - Square - Miniature
Housings - Bearing - Square - Miniature


Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.


Housings - Linear - Square - Clamps
Housings - Linear - Square - Clamps

Also see combined categories:
All Linear Bearing Housings



Housings - Linear - Square
Housings - Linear - Square

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads.




Balsa Wood - Square
Balsa Wood - Square


Square section in longer lengths 900mm plus. See block for short lengths. Delivery Surcharges May Apply on Selected Items

This surcharge covers the protective packing required for shipping. Items over 1000mm long will require courier door to door delivery. Balsa sizes are approximate only. A $10.00 surcharge will apply to all orders of Balsa Wood delivered. Balsa Sheets, Block, Dowel, Leading Edge, Rectangle, Square.

Related Information:


Keysteel Lengths - Square - Brass
Keysteel Lengths - Square - Brass

Also see combined categories:
All Keysteel Lengths

Brass key steel


Related Information:


Keysteel Lengths - Square - Carbon Steel
Keysteel Lengths - Square - Carbon Steel

Also see combined categories:
All Keysteel Lengths

Plain carbon steel key steel

Use oversized for replacing keys where the keyway may be slightly worn - standard aftermarket keysteel. Use undersized for manufacturing and new applications where the keyway tolerances can be controlled.

Related Information:


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.