Small Parts & Bearings - an MBA company

Mounts Bobbin Male To Female Categories


Mounts Cylindrical










Mounts - Bobbin - Square Base
Mounts - Bobbin - Square Base

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening

Fastener may be steel, brass or zinc plated. Natural Rubber isolator.




Mounts - Buffer - Male - Conical
Mounts - Buffer - Male - Conical

Also see combined categories:
All Cylindrical Mounts

Rubber hardness 60 Duro Standard unless otherwise noted. Vibration dampening



Bumpers - Round - Urethane - Female Washer
Bumpers - Round - Urethane - Female Washer

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core. Washer type has a counterbored hole to accept a socket head cap screw. Flat washer molded inside.



Knobs - Star - Female - Soft
Knobs - Star - Female - Soft

Also see combined categories:
All Star Knobs

Also see lobe knobs

Special high impact strength black technopolymer, covered with soft-touch elastomer chemically bonded (hardness 70 Shore A). Resistant to solvents, oils, greases and other chemical agents. brass insert with tapped blind hole.


Screws - Panel - Jack - Steel
Screws - Panel - Jack - Steel

Also see combined categories:
All Panel Screws

Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.

Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.


Rod Ends - Steel - Studded - Swaged Construction - Female
Rod Ends - Steel - Studded - Swaged Construction - Female

Also see combined categories:
All Female Rod Ends with Stud

Designed for heavy duty service, they come with dirt shield to provide protection against contaminants.

Unique assembly swages metal to retain the ball in cavity resulting in increased pull out and wear resistance. Ball studs are surface hardened. Made of low carbon steel, plated and dichromate treated.


Knobs - Lever
Knobs - Lever

Also see combined categories:
All Levers
All Knobs

Lever knobs with moulded female threads, ideal for direct attachment to operating levers. Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC. All knobs are fitted with a brass female insert.


Knobs - Push-Pull
Knobs - Push-Pull


Contoured knobs plated Steel threaded female inserts. Fitted with generous dome to shank ratios to accommodate both push and pull operations. Temperature Range: -30oC to +140oC.


Knobs - Knurled - Torque - Female
Knobs - Knurled - Torque - Female

Also see combined categories:
All Knurled Knobs
All Knobs

Plastic (high grade gloss black phenolic) Knob. Temperature Range: -30oC to +140oC.


Knobs - Wing - Female - Contoured
Knobs - Wing - Female - Contoured

Also see combined categories:
All Wing Knobs

Plastic (high grade gloss black phenolic) with Steel Insert. Temperature Range: -30oC to +140oC.


Knobs - Knurled - Soft Touch - Female - Thermoplastic
Knobs - Knurled - Soft Touch - Female - Thermoplastic

Also see combined categories:
All Knurled Knobs
All Knobs

Soft Touch Black Thermoplastic with Steel Insert.


Knobs - Five Lobe - Soft Touch - Female
Knobs - Five Lobe - Soft Touch - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Four Lobe - Soft Touch - Female
Knobs - Four Lobe - Soft Touch - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Three Lobe - Soft Touch - Female
Knobs - Three Lobe - Soft Touch - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Bumpers - Cylindrical - Female - Neoprene
Bumpers - Cylindrical - Female - Neoprene

Also see combined categories:
All Cylindrical Bumpers



Bumpers - Cylindrical - Female - Urethane
Bumpers - Cylindrical - Female - Urethane

Also see combined categories:
All Cylindrical Bumpers



Knobs - Five Lobe - Soft Touch -Through Hole - Female
Knobs - Five Lobe - Soft Touch -Through Hole - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Three Lobe - Blind Hole - Solid Top - Female
Knobs - Three Lobe - Blind Hole - Solid Top - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Bumpers - Round - Urethane - Female
Bumpers - Round - Urethane - Female

Also see combined categories:
All Female Bumpers
All Bumpers

With steel core.



Knobs - Knurled - Female - Phenolic
Knobs - Knurled - Female - Phenolic

Also see combined categories:
All Knurled Knobs
All Knobs

Plastic (high grade gloss black phenolic) with Steel Insert.


Knobs - Star - Female - Plastic
Knobs - Star - Female - Plastic

Also see combined categories:
All Star Knobs

Also see lobe knobs

Plastic (high grade gloss black phenolic) knob with steel insert. Temperature Range: -30oC to +140oC.


Knobs - Thumb - Female
Knobs - Thumb - Female

Also see combined categories:
All Thumb Knobs
All Knobs

Plastic (high grade gloss black phenolic) with Steel insert. Temperature Range: -30oC to +140oC.


Rod Ends - Plastic - Female
Rod Ends - Plastic - Female

Also see combined categories:
All Female Rod Ends

Thermoplastic Body / L280(R) Polymer Ball. Also known as Heim Joints

Dimensions not shown are available on request.


Knobs - Cross - Blind - Female
Knobs - Cross - Blind - Female

Also see combined categories:
All Cross Knobs
All Knobs



Knobs - Cross - Standard - Female
Knobs - Cross - Standard - Female

Also see combined categories:
All Cross Knobs
All Knobs



Rod Ends - Steel - Studded - Quick Disconnect - Female
Rod Ends - Steel - Studded - Quick Disconnect - Female

Also see combined categories:
All Female Rod Ends with Stud

Joints are strength, quick disconnect assemblies with good wear characteristics. Retaining sleeve insures the assembly can only be put together with the sleeve positively aligned with the ball cavity. When spring is released, alignment is automatic thereby eliminating any possiblity of partial closure. Ball stud and Body are made of low carbon steel. Studs are surface hardened. All Parts are plated and dichromate treated.


Mounts - Buffer - Special Purpose
Mounts - Buffer - Special Purpose

Also see combined categories:
All Cylindrical Mounts

Vibration dampening

Natural rubber with bonded in studs. 50 Durometer hardness. Use up to 65 Degrees C (150 Deg F).


Rod Ends - Steel - Stamped - Female
Rod Ends - Steel - Stamped - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Economy stamped style combines high strength with low cost. Also known as Heim Joints

Made from low carbon steel and plated for corrosion resistance. Ball is case hardened.


Knobs - Ball - Novo-Grip - Female
Knobs - Ball - Novo-Grip - Female

Also see combined categories:
All Female Threaded Ball Knobs

Ergonomic Shape for easy gripping

Unique styling for a very distinctive look. Belt fluting for non-slip gripping. Black thermoplastic with steel or stainless steel inserts.


Knobs - Cross - Through Hole - Female
Knobs - Cross - Through Hole - Female

Also see combined categories:
All Cross Knobs
All Knobs



Knobs - Five Lobe - Standard - Female
Knobs - Five Lobe - Standard - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Four Lobe - Standard - Female
Knobs - Four Lobe - Standard - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Seven Lobe - Standard - Female
Knobs - Seven Lobe - Standard - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Six Lobe - Standard - Female
Knobs - Six Lobe - Standard - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Three Lobe - Standard - Female
Knobs - Three Lobe - Standard - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Mounts - Compression
Mounts - Compression


Used for vertically applied loads to prevent the transmission of noise and vibration caused by rotation of unbalanced equipment.

Made with durable oil and ozone resistant neoprene. No special tools required for installation.


Rod Ends - Steel - Bronze Lined - Female
Rod Ends - Steel - Bronze Lined - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Imperial and Metric / Carbon Steel. Also known as Heim Joints

Dimensions not shown are available on request.


Rod Ends - Steel - Nylon Raceway - Female
Rod Ends - Steel - Nylon Raceway - Female

Also see combined categories:
All Female Rod Ends
All Steel Female Rod Ends

Also known as Heim Joints



Knobs - Five Lobe - Through Hole - Female
Knobs - Five Lobe - Through Hole - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Four Lobe - Through Hole - Female
Knobs - Four Lobe - Through Hole - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Seven Lobe - Quick Acting - Female
Knobs - Seven Lobe - Quick Acting - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Six Lobe - Through Hole - Female
Knobs - Six Lobe - Through Hole - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Knobs - Three Lobe - Through Hole - Female
Knobs - Three Lobe - Through Hole - Female

Also see combined categories:
All Lobe Knobs
All Knobs

Also see star knobs



Mounts - Leveling - Anti-Vibration - Studded Type
Mounts - Leveling - Anti-Vibration - Studded Type

Also see combined categories:
All Pivotal Levelers
All Mounting Feet

Specifically designed to provide low frequency vibration isolation, leveling and shock attenuation for electronics and machinery. Adjusters.

15o swivel off centre to adjust to uneven surfaces. over 12mm of black neoprene permanently bonded to the base. Neoprene operating temperature -20 to 80 oC. Steel parts are zinc plated with black chromate finish.


Mounts - Neoprene Pads - Ribbed Pattern
Mounts - Neoprene Pads - Ribbed Pattern

Also see combined categories:
All Mounting Pads

Provides a versatile, inexpensive way to isolate shock, vibration and reduce noise levels.

Simply lift the machine and slide the pads under each foot. Provides firm footing to floor and equipment. Ribbed pads can be stacked with the ribs at 90o to each other or nested with the ribs in the grooves. Scored in 50.8mm squares for easy cutting. Oil resistant neoprene rubber.


Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 125482 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 125482 products in 2754 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.