Small Parts & Bearings - an MBA company

Model Car Kits Categories


Hobby Accessories


Accessories - Hobby - Car and Buggy
Accessories - Hobby - Car and Buggy

Generic Parts. Specific model parts may also be found by typing the model number into the search box. Fail safes, aerials, heat sinks, body clips, tune pipe, clutch bell, bump start, engine break stand, engine fans, antenna tubes and tire warmers.

Includes Kyosho pull starts.



You may also be interested in

Gearboxes Right Angle


Gearboxes - Right Angle - Model RA 0870-0660-0600 - 87.0 x 66.0 x 60.0mm
Gearboxes - Right Angle - Model RA 0870-0660-0600 - 87.0 x  66.0 x 60.0mm

Also see combined categories:
All Right Angle Gearboxes

1 : 1 ratio only. BL18 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Bevel: Medium Carbon Steel 080M40(EN8). Backlash: 1o. Lubrication: Greased for life - Shell Nerita Grease HV. Weight: 1.3kg.



Vacuum Cleaner Belts


Multi Models Dyson Parts
Multi Models Dyson Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.



Collectibles


Collectibles - Metal Motorcycles
Collectibles - Metal Motorcycles

Beautiful model motorbikes in various styles including choppers, road bikes and vintage designs.

Made from industrial parts including bearings, screws, nuts, springs, chain links, rod, tubing and other parts. Two colours available - gunmetal grey or copper finish. Each bike is hand made, and therefore there may be minor differences between the bikes of a particular model. Re-Cycle motorbikes are a limited edition set of 20.



Fishing Reel Parts


5230 1970 Models Abu Garcia Parts
5230 1970 Models Abu Garcia Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.



Gearboxes Right Angle


Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x 30.5 x 18.7mm
Gearboxes - Right Angle - Model RA 0305-0305-0187 - 30.5 x  30.5 x 18.7mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 1:1 Ratio. B332 Series. Miniature gearbox.

1:1 Ratio Only / 4mm Shafts. Min Torque 0.5 Ncm. Backlash Approx 2o. Approx Max Temperature 80 oC. Suitable for manual and short term drive application.



Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x 40.0 x 25.0mm
Gearboxes - Right Angle - Model RA 0400-0400-0250 - 40.0 x  40.0 x 25.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH20 Series. Miniature gearbox.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:
Output Shafts


Gearboxes - Right Angle - Model RA 0445-0445-0254 - 44.45 x 44.45 x 25.4mm
Gearboxes - Right Angle - Model RA 0445-0445-0254 - 44.45 x  44.45 x 25.4mm

Also see combined categories:
All Right Angle Gearboxes

BGA24-1 (1 to 1 Ratio)

Anodised Aluminium Housing. 303 Stainless Shafts. Minus 20 to Plus 80 oC Temperature Range. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease EP2.



Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x 55.0 x 34.0mm
Gearboxes - Right Angle - Model RA 0550-0550-0340 - 55.0 x  55.0 x 34.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:
Output Shafts


Gearboxes - Right Angle - Model RA 0635-0635-0381 - 63.5 x 63.5 x 38.1mm
Gearboxes - Right Angle - Model RA 0635-0635-0381 - 63.5 x  63.5 x 38.1mm

Also see combined categories:
All Right Angle Gearboxes

BGA31-1 (1 to 1 Ratio)

Anodised Aluminium Housing. 303 Stainless Shafts. Minus 20 to Plus 80 oC Temperature Range. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease EP2.



Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x 44.0 x 44.0mm
Gearboxes - Right Angle - Model RA 0750-0440-0440 - 75.0 x  44.0 x  44.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 1.6 Nm-5.0 Nm ratios 6:1 to 24:1. BLN20 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.



Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x 75.0 x 44.0mm
Gearboxes - Right Angle - Model RA 0750-0750-0440 - 75.0 x  75.0 x 44.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:
Output Shafts


Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x 60.0 x 60.0mm
Gearboxes - Right Angle - Model RA 0980-0600-0600 - 98.0 x  60.0 x  60.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 5 Nm-15 Nm ratios 6:1 to 24:1. BLN30 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.



Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm
Gearboxes - Right Angle - Model RA 1000-1000-0600 -100.0 x 100.0 x 60.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:
Output Shafts


Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm
Gearboxes - Right Angle - Model RA 1250-1250-0800 -125.0 x 125.0 x 80.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.

Related Information:
Output Shafts


Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x 80.0 x 80.0mm
Gearboxes - Right Angle - Model RA 1320-0800-0800 -132.0 x  80.0 x  80.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 13 Nm-43 Nm ratios 6:1 to 24:1. BLN40 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.



Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm
Gearboxes - Right Angle - Model RA 1400-1400-0980 -140.0 x 140.0 x 98.0mm

Also see combined categories:
All Right Angle Gearboxes

BLH70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Shaft Bevel: Hardened Alloy Steel 655M13 (14NiCr14) or 805M20 (21NiCrMo2) (8620) depending on manufacturer's preference. Threaded Bearing Caps: Mild Steel, chemically blackened (blackodised). Fasteners: Steel (non-plated) Bearings: Steel. Lubrication: Greased for life - Shell Alvania Grease HDX2.



Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm
Gearboxes - Right Angle - Model RA 1900-1200-1200 -190.0 x 120.0 x 120.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 40.6 Nm-110 Nm ratios 6:1 to 24:1. BLN50 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.



Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm
Gearboxes - Right Angle - Model RA 2450-1600-1600 -245.0 x 160.0 x 160.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 86 Nm-270 Nm ratios 6:1 to 24:1. BLN60 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 3000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.



Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm
Gearboxes - Right Angle - Model RA 3000-2000-2000 -300.0 x 200.0 x 200.0mm

Also see combined categories:
All Right Angle Gearboxes

Bevel Gears - 215 Nm-550 Nm ratios 6:1 to 24:1. BLN70 Series.

Case: AA15 Red Anodised Aluminum (6082-T6). Gear: Steel 655M13 (EN36) Hardened. Backlash: Depends on ratio. Max. Input Speed: 2000 Rpm. Lubrication: Greased for life - Shell Alvania Grease HDX2.



Power Tool Parts


6 Inch Bandsaw Vertical Bench Model GMC Parts
6 Inch Bandsaw Vertical Bench Model GMC Parts

Bearings and Spare Parts

Where alternative parts are offered, we make no claims as to their suitability. Selection of the most suitable bearings and parts is the responsibility of the customer. We recommend you replace bearings with the same type if that type is working well. High speed caged bearings are better suited to handle vibration than standard caged bearings.



Hobby Accessories


Accessories - Hobby - Aircraft
Accessories - Hobby - Aircraft

Generic Parts. Specific model parts may also be found by typing the model number into the search box. Reinforced Tape, Masking Tape, Micro Gear Nose, Gear Mech Retracts, Retractable Wing Tailwheels, gas struts



Accessories - Hobby - Helicopter
Accessories - Hobby - Helicopter

Generic Parts. Specific model parts may also be found by typing the model number into the search box. Training Gear, Polished Tuned Muffler, Heli Pitch, Foam Stand



Fuel


Fuel - Accessories
Fuel - Accessories

Includes fuel tanks for World Model Aircraft



Screws Wood


Screws - Wood - Brass
Screws - Wood - Brass

Brass wood screws for models



Engineering and Hobby Rod


Rod - Round - Glass Fibre
Rod - Round - Glass Fibre

Also see combined categories:
All Plastic Rod

High impact light weight fibreglass for modelling and kites.

Glass fibre rod is more flexible and less brittle than carbon fibre rod.



Bearings for Dental Equipment


Bearings - Dental Applications
Bearings - Dental Applications

See Dental Handpiece Bearings and Orings for applications by model.

This listing is the basic features of various bearings for dental applications. Please contact us for a dental application list. See - Dental Handpiece Bearings and Orings for applications by model.



Motors DC


Motors - DC 6mm Diameter
Motors - DC  6mm Diameter

Also see combined categories:
All DC Motors

Our smallest motors at an affordable price.

Various models 10000 to 30000 rpm. Low starting voltage of Less than0.8V. Rated Voltage 1.3V. Less than 43 dB Mechanical Noise Level. 100 hours / 100000 turns mechanical life. Clockwise rotation when viewed from shaft end. Not recommended for reversing.

Related Information:
Batteries


Balsa Wood


Balsa Wood - Projects
Balsa Wood - Projects

Many to choose from including bi-plane, miners hut, mosque, church, settlers hut, insect, passenger liner, sailing ship, old out house, ancient ruin. Great for learning about balsa modeling.

Instructions included.



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124326 products in 2772 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124326 products in 2772 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.