Small Parts & Bearings - an MBA company

Magnets Alnico Ring Categories


Magnets Alnico


Magnets - Alnico - Ring
Magnets - Alnico - Ring

Also see combined categories:
All Magnets
All Alnico Magnets

Cast Alnico 5



Magnets - Alnico - Bar
Magnets - Alnico - Bar

Also see combined categories:
All Magnets
All Alnico Magnets

Cast Alnico 5 bar



Magnets - Alnico - Button
Magnets - Alnico - Button

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper



Magnets - Alnico - Horseshoe
Magnets - Alnico - Horseshoe

Also see combined categories:
All Magnets
All Alnico Magnets

General purpose horseshoe magnet



Magnets - Alnico - Minor Magnet
Magnets - Alnico - Minor Magnet

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper



Magnets - Alnico - Pocket Magnet
Magnets - Alnico - Pocket Magnet

Also see combined categories:
All Magnets
All Alnico Magnets

Supplied with keeper



Magnets - Alnico - Rod - Sintered
Magnets - Alnico - Rod - Sintered

Also see combined categories:
All Magnets
All Alnico Magnets

Alnico sintered ASA 8HC


Related Information:


Magnets - Alnico - Shielded
Magnets - Alnico - Shielded

Also see combined categories:
All Magnets
All Alnico Magnets



Magnets - Alnico - Side Pole Rotator
Magnets - Alnico - Side Pole Rotator

Also see combined categories:
All Magnets
All Alnico Magnets



You may also be interested in

Magnets Ceramic


Magnets - Ceramic Ring
Magnets - Ceramic Ring

Also see combined categories:
All Magnets
All Ceramic Magnets



Magnets - Alcomax - Cylindrical Bar
Magnets - Alcomax - Cylindrical Bar

Also see combined categories:
All Magnets
All Alcomax Magnets

No keepers



Magnets - Alcomax - Power
Magnets - Alcomax - Power

Also see combined categories:
All Magnets
All Alcomax Magnets

Supplied with keeper



Magnets - Alcomax - Rectangular Bar
Magnets - Alcomax - Rectangular Bar

Also see combined categories:
All Magnets
All Alcomax Magnets

No keepers



Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit
Magnets - Ceramic - 2 Pole - Insulated Aluminium - Press Fit

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. Press fit. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole
Magnets - Ceramic - 3 Pole - Insulated Aluminium - Tapped Blind Hole

Also see combined categories:
All Magnets
All Ceramic Magnets

Extended poles can be lightly machined. With tapped blind hole in base for mounting. Insulated aluminium casing.

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Blocks
Magnets - Ceramic Blocks

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Ceramic Cylinder
Magnets - Ceramic Cylinder

Also see combined categories:
All Magnets
All Ceramic Magnets

Low cost, light weight, high energy material

Non conductive hard brittle material. Performs best at temperatures below 249 oC. Can be cut with a diamond wheel. Difficult to grind and can't be machined or drilled by normal methods. Tolerance 0.13mm on all dimensions.


Magnets - Cup Assemblies - Clips
Magnets - Cup Assemblies - Clips

Also see combined categories:
All Magnets
All Cup Magnets



Magnets - Cup Assemblies - Loop
Magnets - Cup Assemblies - Loop

Also see combined categories:
All Magnets
All Cup Magnets

Ideal for hanging signs and lights, retrieving steel items from tanks, vats, bins etc.

Plated cup with a 9.525mm ID loop.


Magnets - Cup Assemblies - Stud
Magnets - Cup Assemblies - Stud

Also see combined categories:
All Magnets
All Cup Magnets



Magnets - Cup Assemblies - Through Hole
Magnets - Cup Assemblies - Through Hole

Also see combined categories:
All Magnets
All Cup Magnets



Magnets - Rare Earth - Plated
Magnets - Rare Earth - Plated

Also see combined categories:
All Magnets
All Rare Earth Magnets

Incredibly strong attraction and repulsion. Neodymium-Iron-Boron encased in nickel jackets to protect the brittle magnet material and prevent corrosion.

High strength to weight ratios. Commonly used in miniature applications such as linear actuators, sensing applications, gyroscopes, flow meters, recording devices, pacemakers and alternators. Temperature range -73 oC to 93 oC. Size tolerances +/- 0.13.


Magnets - Rare Earth - Shielded
Magnets - Rare Earth - Shielded

Also see combined categories:
All Magnets
All Rare Earth Magnets

Insulator shield prevents loss of magnetic flux when inserted into steel components or fixtures

Shielded magnets supply holding forces in limited areas of steel tools, dies and fixtures.


Magnets - Rubber and Vinyl
Magnets - Rubber and Vinyl

Also see combined categories:
All Magnets

Magnetic Vinyl Sheets and Magnetic Rubber Strip



Gearmotors - DC PM - Size 70x114
Gearmotors - DC PM - Size 70x114

Also see combined categories:
All DC Permanent Magnet Gearmotors

Permanent Magnet.

Max. Allowable Radial Load: 100N (10mm from mounting surface). Max. Allowable Axial Load: 30N. Axial Play: 0.05 - 0.6mm. Allowable Temperature Range: -20oC to +60oC. Integral CD PM Motor - Brush type commutation - 12 segment commutator - RFI protection standard. Gear train with steel and high quality plastic gears - Terminal dimensions 4.8 x 0.8 - Weight: 1200g.


Rings - Hoist - With Ball Bearings
Rings - Hoist - With Ball Bearings

Also see combined categories:
All Hoist Rings

Multidirectional loading with design factor 4 to 1

Adjustable under load. Suitable for through bore holes. Suitable for all loads which have to be rotated 360o. High tensile suspension ring and bearing housing. 100 percent electro magnetic crack tested.


Clutches - Slip - Magnetic Particle - No Power
Clutches - Slip - Magnetic Particle - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:


Clutches - Slip - Magnetic Particle - Integral Shaft - No Power
Clutches - Slip - Magnetic Particle - Integral Shaft - No Power

Also see combined categories:
All Slip Clutches

Requires no power.

Sealed from contamination. Uses permanent magnets and magnetic particles. Constant torque levels. Zero maintenance - Long operational life. See PDF sheet at bottom of this page.

Related Information:


Rings - Hoist - Bar-Tite -tm-
Rings - Hoist - Bar-Tite -tm-

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot, 360o swivel.

High tensile alloy steel. 100 percent magnetic particle inspected. Safety factor minimum 5 to 1. Black oxide finish per Mil C-13924B. Certified heat treatment.


Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic
Bearings - Thrust - Ball - Grooved - ZRO2 Ceramic

Also see combined categories:
All Ball Thrust Bearings

3 Piece Thrust Bearings Open Type. Excellent performance in electrical and magnetism sensitive applications. Full ceramic silicon nitride.

These bearings are designed so that when one ring turns, the other remains stationary. Some have a larger bore on one side allowing a shaft with no steps to pass through. Others have identical bores on each race, requiring a stepped shaft. Some have a reduced OD on one race allowing seating into an unstepped housing bore, whilst others will require a stepped housing to allow one ring to rotate. Please be sure to take note of the figures shown for ID and OD of both races to ensure you select the correct bearing.

Related Information:


Rings - Retaining - C Type External - For Linear Bearings
Rings - Retaining - C Type External - For Linear Bearings


Fits into the retaining ring grooves on the outside diameter of Super Smart, Super and Precision Linear Bearings to provide external mounting retension.



Rings - Retaining - PR Type Internal - For Linear Bearings
Rings - Retaining - PR Type Internal - For Linear Bearings


Push in retaining ring for use with closed type Super Smart, Super and Precision linear bearings. Installed in the housing bore at each end of the linear bearing.



Rings - Split - Stainless Steel
Rings - Split - Stainless Steel

Also see combined categories:
All Split Rings

316 stainless steel wire rings.



Rings - Split - Zinc Plated Steel
Rings - Split - Zinc Plated Steel

Also see combined categories:
All Split Rings

Zinc plated hard drawn steel wire rings.



Rings - Crescent
Rings - Crescent


Variation of an E-Clip with an open face. Also known as a C-Clip.

Narrow section height provides good clearance capabilities. Absence of teeth and deep set mean less thrust load ratings than e-clips. For best results install using the recommended applicator tool.

Related Information:


Rings - D - Nickel Plated
Rings - D - Nickel Plated


Nickel plated D Rings



Rings - Round - Nickel Plated
Rings - Round - Nickel Plated


Nickel plated round rings



Rings - Tolerance
Rings - Tolerance


Tolerance rings allow looser tolerances for assembly of parts such as bearings, pulleys and gears.

Allows looser tolerances of components. Ideal for mounting ball bearings. Useful for salvaging worn parts. Permits low cost assembly by eliminating the need for conventional fasteners. Use Torque Transfer figures for gears and pulleys. Non torque transfer figures are for bearing applications.


Rings - Hoist - Heavy Duty
Rings - Hoist - Heavy Duty

Also see combined categories:
All Hoist Rings

Self aligning in the direction of the load. Minimum of 5 to 1 safety factor in any direction.

Rotates 360o. One piece construction - no lost parts. Alloy steel with black oxide finish. 100 percent magnetic particle inspected. Rated load based on specific thread torques as shown. Recommended that the torque shown be used when installing these hoist rings.


Rings - Hoist - Heavy Duty - MIL-STD1365
Rings - Hoist - Heavy Duty - MIL-STD1365

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected. Meets USA OSHA standards. Black oxide finish.


Rings - Hoist - Safety Engineered
Rings - Hoist - Safety Engineered

Also see combined categories:
All Hoist Rings

Range of movement 180o pivot and 360o swivel. Safety factor 5 to 1. Meets MIL-STD1365 (11) or MIL-STD209C. Certified heat treated alloy steel. Made from one piece forged steel.

100 percent magnetic particle inspected.


Rings - Hoist - Side Pull - External Wrench Mount
Rings - Hoist - Side Pull - External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Side Pull - Full Swivel
Rings - Hoist - Side Pull - Full Swivel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Extra large diameter ring allows for large hook. Made of alloy steel with black oxide finish. Safety factor of 5 to 1.

Individually pull tested and certified.


Rings - Hoist - Side Pull - Internal-External Wrench Mount
Rings - Hoist - Side Pull - Internal-External Wrench Mount

Also see combined categories:
All Hoist Rings

Ideal for flipping fixtures, dies and moulds. The hoist ring is low profile and has a unique bolt retention design. The oversized forged bail easily adapts to larger hoist hooks. Relatively light weight makes it easier to handle than similar rings.

Convenient installation with internal or external wrenching. Alloy steel with black oxide finish. Safety factor 5 to 1. Proof tested to 200 percent of rated load capacity. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Stationary - Without Screws
Rings - Hoist - Stationary - Without Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.

Related Information:


Rings - Hoist - Stationary - With Screws
Rings - Hoist - Stationary - With Screws

Also see combined categories:
All Hoist Rings

Engineered to provide maximum load capacities regardless of pull. Provides safe handling of heavcy equipment and parts. The eye pivots 180o and lays flat when not in use.

Heat treated forged alloy steel with black oxide finish. Safety factor of 6 to 1. To meet maximum load capacities high strength screws must be used. DO NOT EXCEED WORKING LOAD LIMITS.


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Stainless Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of 316 stainless steel. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:


Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel
Rings - Hoist - Tamper Resistant - Swivel Eybolts - Steel

Also see combined categories:
All Hoist Rings

Full swivel and pivot action allows you to flip and turn parts without unhooking. Made of alloy steel with black oxide finish. Tamper resistant design is ideal for permanent mounting on OEM applications or on moulds, dies and fixtures.

safety factor of 5 to 1. Installation tool sold separately.

Related Information:


Rings - Lift - Universal
Rings - Lift - Universal


For straight lifting only. Each ring offers three different thread sizes for varied use. Made of high strength steel. Do not apply side load. Lifting capacities are MAXIMUM safe working load.



Rings - Backup
Rings - Backup


Durometer 90 Nitrile Rubber back up rings.



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124372 products in 2773 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124372 products in 2773 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.