Small Parts & Bearings - an MBA company

Linear Bearings Categories


Bearings - Linear - Ball - Miniature - Super High Precision
Bearings - Linear - Ball - Miniature - Super High Precision

Also see combined categories:
All Closed Linear Ball Bearings

High Precision Corrosion Resistant Miniature Linear Bearings.

High Precision Swiss Made, Accurate Guiding, Smooth Running. High Load Capacity. Tolerances --- d (+0.008 / -0.000 mm) D (+0.000 / -0.010 mm). Recommended Outer ring fitted with interferance of 1-3 Microns or retained by Circlips. Shafts (not included) should be 60-63 Rockwell C hardness with tolerances +0.000 / -0.006 mm.

Related Information:

A larger range of Bearings - Linear - Ball - Miniature - Super High Precision might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Ball - Miniature - Super High Precision on the Miniature Bearings Australia site.


Bearings - Linear - Ball - Stainless Steel - Closed
Bearings - Linear - Ball - Stainless Steel - Closed

Also see combined categories:
All Closed Linear Ball Bearings

Standard closed type to run on standard 60HRC shafts with h6 tolerances. For running on shafts fixed at the ends.

Use with hardened precision ground shafting. Shaft tolerance: h6 (Normal Fit), j6 (Close Fit). Housing Tolerance: H7 (Clearance Fit), J7 (Interference Fit). Max Temp: 100 oC Intermittent, 80 Deg C continuous. This category may be available in the new MBA online store at Bearings - Linear - Ball - Stainless Steel - Closed.

Related Information:

A larger range of Bearings - Linear - Ball - Stainless Steel - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Ball - Stainless Steel - Closed on the Miniature Bearings Australia site.


Bearings - Linear - Ball - Thomson Precision Steel - Closed
Bearings - Linear - Ball - Thomson Precision Steel - Closed

Also see combined categories:
All Thomson Linear Ball Bearings

For running on shafts fixed at the ends.

This category may be available in the new MBA online store at Bearings - Linear - Ball - Thomson Precision Steel - Closed.

Related Information:

A larger range of Bearings - Linear - Ball - Thomson Precision Steel - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Ball - Thomson Precision Steel - Closed on the Miniature Bearings Australia site.


Bearings - Linear - Frelon Gold Lined - Closed - Precision
Bearings - Linear - Frelon Gold Lined - Closed - Precision

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Related Information:

A larger range of Bearings - Linear - Frelon Gold Lined - Closed - Precision might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Frelon Gold Lined - Closed - Precision on the Miniature Bearings Australia site.


Bearings - Linear - Frelon Gold Lined - Closed - Standard
Bearings - Linear - Frelon Gold Lined - Closed - Standard

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Related Information:

A larger range of Bearings - Linear - Frelon Gold Lined - Closed - Standard might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Frelon Gold Lined - Closed - Standard on the Miniature Bearings Australia site.


Bearings - Linear - Frelon Gold Lined - Open - Precision
Bearings - Linear - Frelon Gold Lined - Open - Precision

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Precision type has closer running clearances.

Related Information:

A larger range of Bearings - Linear - Frelon Gold Lined - Open - Precision might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Frelon Gold Lined - Open - Precision on the Miniature Bearings Australia site.


Bearings - Linear - Frelon Gold Lined - Open - Standard
Bearings - Linear - Frelon Gold Lined - Open - Standard

Also see combined categories:
All Open Frelon Lined Linear Bearings
All Open Frelon Gold Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon Gold = 20000 PV. Dry Running Max Surface Speed Frelon Gold = 1.5 mtrs / sec (300 ft / min). With Lubrication Max Surface Speed Frelon Gold = 4.1 mtrs / sec (825 ft / min). Interaction of the Frelon Gold material and the shafting creates a microscopic transfer of Frelon Gold to the running surfaces filling the valleys during the initial break-in period. Standard type has slightly larger running clearances.

Related Information:

A larger range of Bearings - Linear - Frelon Gold Lined - Open - Standard might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Frelon Gold Lined - Open - Standard on the Miniature Bearings Australia site.


Bearings - Linear - Frelon J Lined - Closed - Precision
Bearings - Linear - Frelon J Lined - Closed - Precision

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Precision type has closer running clearances.

Related Information:

A larger range of Bearings - Linear - Frelon J Lined - Closed - Precision might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Frelon J Lined - Closed - Precision on the Miniature Bearings Australia site.


Bearings - Linear - Frelon J Lined - Closed - Standard
Bearings - Linear - Frelon J Lined - Closed - Standard

Also see combined categories:
All Closed Frelon Lined Linear Bearings
All Closed Frelon J Lined Linear Bearings

Self lubricating. Eliminates galling and shaft damage. Dampens vibration for quiet smooth operation. High load capacity. Absorbs shock loads. Maintenance free. Chemically inert. Temp range -240 Deg C to +260 Deg C

Frelon J = 10000 PV. Dry Running Max Surface Speed Frelon J = 0.7 mtrs / sec (140 ft / min). With Lubrication Max Surface Speed Frelon J = 2 mtrs / sec (400 ft / min). Standard type has slightly larger running clearances.

Related Information:

A larger range of Bearings - Linear - Frelon J Lined - Closed - Standard might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Frelon J Lined - Closed - Standard on the Miniature Bearings Australia site.


Bearings - Linear - Sliding - Ceramic Coated
Bearings - Linear - Sliding - Ceramic Coated

Also see combined categories:
All Sliding Linear Bearings

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Minimum shaft hardness RC35. Max PV 40,000. Temperature range -125 oC to +226 Deg C. Max static PSI 5000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Ceramic Coated.

A larger range of Bearings - Linear - Sliding - Ceramic Coated might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Sliding - Ceramic Coated on the Miniature Bearings Australia site.


Bearings - Linear - Sliding - Stainless - PTFE - Closed
Bearings - Linear - Sliding - Stainless - PTFE - Closed

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Stainless - PTFE - Closed.

A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Sliding - Stainless - PTFE - Closed on the Miniature Bearings Australia site.


Bearings - Linear - Sliding - Stainless - PTFE - Open
Bearings - Linear - Sliding - Stainless - PTFE - Open

Also see combined categories:
All Sliding Linear Bearings

Stainless steel shell features FDA/USDA compliant, self lubricating PTFE composite liner. Bearings are direct drop in replacements for many inch sized ball bushings.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. Stainless steel shell. Designed to run on soft 300 series stainless shafting. Minimum hardness RB25. Ideal for drug and food processing equipment. Unafected by washdowns, contamination and submersion. Coefficient of friction is 0.12 to 0.20. Temperature range is -240 oC to 190 oC. Max static PSI 1000. SFM without any load is 400. Max PV is 10,000. This category may be available in the new MBA online store at Bearings - Linear - Sliding - Stainless - PTFE - Open.

A larger range of Bearings - Linear - Sliding - Stainless - PTFE - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Linear - Sliding - Stainless - PTFE - Open on the Miniature Bearings Australia site.


Seals - For Linear Bearings - Closed
Seals - For Linear Bearings - Closed

Also see combined categories:
All Oil Seals

This category may be available in the new MBA online store at Seals - For Linear Bearings - Closed.

A larger range of Seals - For Linear Bearings - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Seals - For Linear Bearings - Closed on the Miniature Bearings Australia site.


Seals - For Linear Bearings - Open
Seals - For Linear Bearings - Open

Also see combined categories:
All Oil Seals

This category may be available in the new MBA online store at Seals - For Linear Bearings - Open.

A larger range of Seals - For Linear Bearings - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Seals - For Linear Bearings - Open on the Miniature Bearings Australia site.


Linear Bearing Housings


Housings - Linear - Square - Clamps
Housings - Linear - Square - Clamps

Also see combined categories:
All Linear Bearing Housings

This category may be available in the new MBA online store at Housings - Linear - Square - Clamps.

A larger range of Housings - Linear - Square - Clamps might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Square - Clamps on the Miniature Bearings Australia site.


Linear Bearings with Housing


Housings - Linear - Square
Housings - Linear - Square

Also see combined categories:
All Linear Bearing Housings

Used to maintain radial integrity and eliminate the need for parallel shafting.

Bearings are made from 6061-T6 Aluminum with Anodized finished. Equipped with bearing plugs that run on a single shaft. Threaded adjustable plugs are made from 316 Stainless with self-lubricating FrelonJ wear pads. This category may be available in the new MBA online store at Housings - Linear - Square.

A larger range of Housings - Linear - Square might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Square on the Miniature Bearings Australia site.


Housings - Linear - Thomson Super Flanged
Housings - Linear - Thomson Super Flanged

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.


Related Information:

A larger range of Housings - Linear - Thomson Super Flanged might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Thomson Super Flanged on the Miniature Bearings Australia site.


Housings - Bearing - Flange Mounted - Frelon - Self Aligning
Housings - Bearing - Flange Mounted - Frelon - Self Aligning


Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Flange Mounted - Frelon - Self Aligning.

A larger range of Housings - Bearing - Flange Mounted - Frelon - Self Aligning might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Flange Mounted - Frelon - Self Aligning on the Miniature Bearings Australia site.


Housings - Bearing - Pillow Block - Frelon - Precision - Closed
Housings - Bearing - Pillow Block - Frelon - Precision - Closed


Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Frelon - Precision - Closed.

A larger range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Frelon - Precision - Closed on the Miniature Bearings Australia site.


Housings - Bearing - Pillow Block - Frelon - Precision - Open
Housings - Bearing - Pillow Block - Frelon - Precision - Open


Single and double length

Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. Double length has two bearings mounted internally. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Frelon - Precision - Open.

A larger range of Housings - Bearing - Pillow Block - Frelon - Precision - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Frelon - Precision - Open on the Miniature Bearings Australia site.


Housings - Bearing - Pillow Block - Frelon - Standard - Closed
Housings - Bearing - Pillow Block - Frelon - Standard - Closed


Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Frelon - Standard - Closed.

A larger range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Frelon - Standard - Closed on the Miniature Bearings Australia site.


Housings - Bearing - Pillow Block - Frelon - Standard - Open
Housings - Bearing - Pillow Block - Frelon - Standard - Open


Bearing is Frelon Gold -tm- encased in a flanged housing made from 6061-T6 aluminium. For rotating and linear motion. This category may be available in the new MBA online store at Housings - Bearing - Pillow Block - Frelon - Standard - Open.

A larger range of Housings - Bearing - Pillow Block - Frelon - Standard - Open might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Bearing - Pillow Block - Frelon - Standard - Open on the Miniature Bearings Australia site.


Housings - Linear - Thomson Super Smart Flanged
Housings - Linear - Thomson Super Smart Flanged

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.


Related Information:

A larger range of Housings - Linear - Thomson Super Smart Flanged might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Thomson Super Smart Flanged on the Miniature Bearings Australia site.


Housings - Linear - Pillow Block - Closed - Ceramic Coated
Housings - Linear - Pillow Block - Closed - Ceramic Coated

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Approved for direct food contact in applications where animal fat or food approved lubricants are present.

Able to withstand rapid oscillation, contamination, shock/vibration, wash downs, submersion and shaft brinelling. DO NOT USE WD-40 or Silcone based spray lubricants. This category may be available in the new MBA online store at Housings - Linear - Pillow Block - Closed - Ceramic Coated.

A larger range of Housings - Linear - Pillow Block - Closed - Ceramic Coated might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Pillow Block - Closed - Ceramic Coated on the Miniature Bearings Australia site.


Housings - Linear - Thomson Super Smart Pillow Block - Closed
Housings - Linear - Thomson Super Smart Pillow Block - Closed

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.


Related Information:

A larger range of Housings - Linear - Thomson Super Smart Pillow Block - Closed might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Thomson Super Smart Pillow Block - Closed on the Miniature Bearings Australia site.


Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed
Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.


Related Information:

A larger range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Closed - Footed on the Miniature Bearings Australia site.


Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed
Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed

Also see combined categories:
All Linear Bearing Housings
All Linear Bearing Housings With Bearing

Includes Bearings.


Related Information:

A larger range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed might be available on the Bearing Shop Online site. You might also be interested in the range of Housings - Linear - Thomson Super Smart Twin Pillow Block - Open - Footed on the Miniature Bearings Australia site.


You may also be interested in

Ball Splines Linear


Linear Ball Splines - Bearings - Unflanged
Linear Ball Splines - Bearings - Unflanged

Also see combined categories:
All Linear Ball Splines

Use with Linear Ball Spline Shaft.

This category may be available in the new MBA online store at Linear Ball Splines - Bearings - Unflanged.

Related Information:

A larger range of Linear Ball Splines - Bearings - Unflanged might be available on the Bearing Shop Online site. You might also be interested in the range of Linear Ball Splines - Bearings - Unflanged on the Miniature Bearings Australia site.


Bearings Special Purpose


Bearings - Chamfered Edges
Bearings - Chamfered Edges


Chamfered edge bearings for Linear Guide Systems and pushbikes

Often used in pushbike headsets. Note bearings for pushbikes with two chamfered edges have the chamfer on the inner ring on one side and outer ring on the other - designation CEP. This category may be available in the new MBA online store at Bearings - Chamfered Edges.

Related Information:

A larger range of Bearings - Chamfered Edges might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Chamfered Edges on the Miniature Bearings Australia site.


Linear Slides


Slides - Linear - Cross Roller Rail
Slides - Linear - Cross Roller Rail

Also see combined categories:
All Linear Slides

Compact, precision bearings that can support and guide high loads with high accuracy and repeatability, low friction, and low starting force.

Each consists of a pair of hardened steel ways containing 90 deg V grooves and a row of alternately crossed cylindrical rollers. Installed faced to face on smooth flat and accurately parallel, coplanar or perpendicular surfaces. Lubrication required, light grease for low speeds to continuous oil bath/mist for high speeds. This category may be available in the new MBA online store at Slides - Linear - Cross Roller Rail.

A larger range of Slides - Linear - Cross Roller Rail might be available on the Bearing Shop Online site. You might also be interested in the range of Slides - Linear - Cross Roller Rail on the Miniature Bearings Australia site.


Linear Guide System - Two Piece
Linear Guide System - Two Piece


Using Frelon Gold plain bearing technology. Rail and carriage are made from 6063-T6 aluminium and come as a set.

Rails are ceramic coated to resist corrosion and repel weld spatter and contaminants. Smooth running. Dampens vibration. Guide has slots for T nuts or bolts. Two component system allows for easier installation than traditional rail systems. This category may be available in the new MBA online store at Linear Guide System - Two Piece.

A larger range of Linear Guide System - Two Piece might be available on the Bearing Shop Online site. You might also be interested in the range of Linear Guide System - Two Piece on the Miniature Bearings Australia site.


Ball Splines Linear


Linear Ball Splines - Shaft
Linear Ball Splines - Shaft

Also see combined categories:
All Linear Ball Splines

Use with either flanged or unflanged Linear Ball Spline Bearings.

This category may be available in the new MBA online store at Linear Ball Splines - Shaft.

Related Information:

A larger range of Linear Ball Splines - Shaft might be available on the Bearing Shop Online site. You might also be interested in the range of Linear Ball Splines - Shaft on the Miniature Bearings Australia site.


Linear Slides


Slides - Drawer - Front Disconnect - Friction - 19mm Ext
Slides - Drawer - Front Disconnect - Friction - 19mm Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). This category may be available in the new MBA online store at Slides - Drawer - Front Disconnect - Friction - 19mm Ext.

You might also be interested in the range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext on the Miniature Bearings Australia site.


Slides - Drawer - Front Disconnect - Lever - Full Ext
Slides - Drawer - Front Disconnect - Lever - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). This category may be available in the new MBA online store at Slides - Drawer - Front Disconnect - Lever - Full Ext.

You might also be interested in the range of Slides - Drawer - Front Disconnect - Lever - Full Ext on the Miniature Bearings Australia site.


Linear Slides - Cross Roller Tables - Aluminium
Linear Slides - Cross Roller Tables - Aluminium

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Cross Roller Tables - Aluminium.

A larger range of Linear Slides - Cross Roller Tables - Aluminium might be available on the Bearing Shop Online site. You might also be interested in the range of Linear Slides - Cross Roller Tables - Aluminium on the Miniature Bearings Australia site.


Linear Slides - Cross Roller Tables - Steel
Linear Slides - Cross Roller Tables - Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Cross Roller Tables - Steel.

A larger range of Linear Slides - Cross Roller Tables - Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Linear Slides - Cross Roller Tables - Steel on the Miniature Bearings Australia site.


Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage
Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.

You might also be interested in the range of Slides - Drawer - Front Disconnect - Friction - 19mm Ext - Undercarriage on the Miniature Bearings Australia site.


Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext
Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect. This category may be available in the new MBA online store at Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext.

You might also be interested in the range of Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext on the Miniature Bearings Australia site.


Shafting Aluminium


Shafting - Aluminium - Ceramic Coated
Shafting - Aluminium - Ceramic Coated

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated. This category may be available in the new MBA online store at Shafting - Aluminium - Ceramic Coated.

Related Information:

A larger range of Shafting - Aluminium - Ceramic Coated might be available on the Bearing Shop Online site. You might also be interested in the range of Shafting - Aluminium - Ceramic Coated on the Miniature Bearings Australia site.


Linear Slides


Linear Slides - Low Profile - Crossed Roller Table - Aluminium
Linear Slides - Low Profile - Crossed Roller Table - Aluminium

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings. This category may be available in the new MBA online store at Linear Slides - Low Profile - Crossed Roller Table - Aluminium.

A larger range of Linear Slides - Low Profile - Crossed Roller Table - Aluminium might be available on the Bearing Shop Online site. You might also be interested in the range of Linear Slides - Low Profile - Crossed Roller Table - Aluminium on the Miniature Bearings Australia site.


Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

You might also be interested in the range of Slides - Drawer - Stainless - No Disconnect - Heavy Duty - Full Ext on the Miniature Bearings Australia site.


Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext
Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext

Also see combined categories:
All Drawer Slides

Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.

Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.

You might also be interested in the range of Slides - Drawer - Stainless - No Disconnect - Medium Duty - Full Ext on the Miniature Bearings Australia site.


Shafting Aluminium


Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated. This category may be available in the new MBA online store at Shafting - Aluminium - Ceramic Coated - Tapped.

Related Information:

A larger range of Shafting - Aluminium - Ceramic Coated - Tapped might be available on the Bearing Shop Online site. You might also be interested in the range of Shafting - Aluminium - Ceramic Coated - Tapped on the Miniature Bearings Australia site.


Linear Slides


Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel
Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel

Also see combined categories:
All Crossed Roller Slide Tables

Crossed roller slide tables are factory assembled and ready to install. They use crossed roller bearings to provide very precise linear motion with low friction and high support stiffness for the load.

Applications include precision instruments, office and communications equipment, surface grinders, tool grinders, assembly fixtures and anywhere precise linear positioning is required. Precision ground v grooved ways and rollers provide high accuracy and load capacity. Withstands force in any direction from alternately crossed rollers at 45 deg angles. Straight line accuracy 0.0025mm per 25mm travel (0.0001 inch per inch). 0.0025mm position repeatability. Each table consists of a one piece base, a one piece table and a pair of linear bearings.

A larger range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Linear Slides - Low Profile - Crossed Roller Table - Stainless Steel on the Miniature Bearings Australia site.


Shafting Precision Ground


Shafting - Pre Drilled and Tapped - Stainless Steel
Shafting - Pre Drilled and Tapped - Stainless Steel

Also see combined categories:
All Shafting
All Stainless Shafting

For use with rail supports and open linear bearings

This category may be available in the new MBA online store at Shafting - Pre Drilled and Tapped - Stainless Steel.

A larger range of Shafting - Pre Drilled and Tapped - Stainless Steel might be available on the Bearing Shop Online site. You might also be interested in the range of Shafting - Pre Drilled and Tapped - Stainless Steel on the Miniature Bearings Australia site.


Bearings Special Purpose


Bearings - Spherical OD
Bearings - Spherical OD


Bearings with a spherical outside diameter.

Combined listing of spherical OD track rollers and bearings for Linear Guide systems. This category may be available in the new MBA online store at Bearings - Spherical OD.

Related Information:

A larger range of Bearings - Spherical OD might be available on the Bearing Shop Online site. You might also be interested in the range of Bearings - Spherical OD on the Miniature Bearings Australia site.


Shafting Precision Ground


Rail Supports - With Shaft - One Piece
Rail Supports - With Shaft - One Piece

Also see combined categories:
All Shaft Supports

One piece construction made from 6061-T6 Aluminium with ceramic coating to Mil-8625. Suitable for use with Frelon lined linear bearings.

Not suitable for linear ball bearings. Weld spatter, paints and other contaminants will not stick to the shaft. Vibration resistant and non-magnetic. Not suitable for harsh washdown environments. This category may be available in the new MBA online store at Rail Supports - With Shaft - One Piece.

Related Information:

A larger range of Rail Supports - With Shaft - One Piece might be available on the Bearing Shop Online site. You might also be interested in the range of Rail Supports - With Shaft - One Piece on the Miniature Bearings Australia site.


Ball Transfers


Ball Transfer Units - Screw Stem - Stainless - Precision
Ball Transfer Units - Screw Stem - Stainless - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. This category may be available in the new MBA online store at Ball Transfer Units - Screw Stem - Stainless - Precision.

A larger range of Ball Transfer Units - Screw Stem - Stainless - Precision might be available on the Bearing Shop Online site. You might also be interested in the range of Ball Transfer Units - Screw Stem - Stainless - Precision on the Miniature Bearings Australia site.


Ball Transfer Units - Screw Stem - Steel - Precision
Ball Transfer Units - Screw Stem - Steel - Precision

Also see combined categories:
All Screw Fit Ball Transfers

Single ball bearings units for conveyor systems

Applications include measuring equipment and light weight coil handlers. Guides for small linear motion (eg. photocopier slides). Transfer of material in clean rooms. This category may be available in the new MBA online store at Ball Transfer Units - Screw Stem - Steel - Precision.

A larger range of Ball Transfer Units - Screw Stem - Steel - Precision might be available on the Bearing Shop Online site. You might also be interested in the range of Ball Transfer Units - Screw Stem - Steel - Precision on the Miniature Bearings Australia site.


Linear Slides


Linear - Mini Rail - Self-Lubricating - Rail
Linear - Mini Rail - Self-Lubricating - Rail


Rail Only. Carriages sold separately - match by rail width.

Low profile self-lubricating linear guide system with one piece carriage design. Excellent alternative to linear ball bearing systems. Precision series made from RC70 ceramic coated rail with self lubricating Frelon Gold. Dampens vibration and tolerates shock loads. Will not rust. No metal to metal contact. No balls or rolling elements to trap contamination, skid or damage rail. Operation is consistent, smooth and quiet. Maintenance free. Used in packaging machines, medical equipment, wash-down and harsh environments. This category may be available in the new MBA online store at Linear - Mini Rail - Self-Lubricating - Rail.

Related Information:

A larger range of Linear - Mini Rail - Self-Lubricating - Rail might be available on the Bearing Shop Online site. You might also be interested in the range of Linear - Mini Rail - Self-Lubricating - Rail on the Miniature Bearings Australia site.





Main Pages

About Us Acetal Bearings PDF ADR and SKF PDF Anderton Circlips Cross Reference PDF Ball Lock Pins PDF Balls List Balls PDF Barden Bearings Cross Reference PDF Bearings List Brands Catalogue Ceramic Bearings PDF Circlips PDF Clearance Items List Clevis Pins PDF Contact Us Charity Corrosion Resistant Bearings PDF Dental Bearings Disc Springs PDF Dowel Pins PDF Dowel Pins Economy Bearings PDF Essentra Cross Reference PDF Flocast Cross Reference PDF Freight Rates and Shipping Times Frequently Asked Questions General Information about MBA Hammer Drive Pins PDF High Speed Bearings PDF Hobby Clearance Hobby Information K&S Metals Cross Reference PDF Key Steel PDF Knobs PDF Large Bearings Leveling Mounts PDF Mailorder Form McMaster Carr Cross Reference PDF Metallic Bushes PDF Miniature Precison Bearings Cross Reference PDF Nordex Cross Reference PDF NSK and NTN Cross Reference PDF Ondrives Cross Reference PDF O-Rings PDF Pins PDF Plastic Bearings PDF Polyvee Belts and Pulleys PDF Precision Shim Washers PDF Privacy Push On and Push In Rings PDF Reid Supply Cross Reference PDF Rod & Tube PDF Roll Pins PDF SDP-SI Designatronics Cross Reference PDF Seeger Circlips Cross Reference PDF Shaft Collars PDF Shim Sheet PDF Shoulder Screws PDF Sintered Bronze Bushes PDF Sintered Bronze Cross Reference PDF Small Bearings Small Parts Inc Cross Reference PDF Snap Rings PDF Socket Set Screws PDF Solid Bronze Bushes PDF Spring Steel Strip PDF Springs PDF Standard Ball Bearing Range PDF Super Precision Bearings PDF Taper Pins PDF Technical Information Terms Thrust Bearings PDF Thumb Screws and Nuts PDF Timing Belts and Pulleys Cross Reference PDF Timing Belts PDF Timing Pulley Stock PDF Timing Pulleys PDF Vibration Mounts PDF Washers and Spacers PDF Wave Washers PDF Domains


Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 130404 products in 2013 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 130404 products in 2013 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.