Lifting Chain Categories
Chain - Sash
Stamped formed chain slightly stronger than jack chain. Used for operating heater controls on ducts and dampers, as well as window sashes in double hung windows. Not for lifting.
Low carbon steel with zinc plated finish.
Bolts - Eye - Bent Rod - Steel
Not recommended for lifting.
Carbon steel zinc plated. Complete with nut. Rolled threads.
Bolts - Eye - Bent - Stainless Steel
Not recommended for lifting. 304 stainless steel.
Complete with nut. Rolled threads.
Chain - Roller - Plastic - Simplex
Includes acetal, polyproylene and nylon. Miniature size from 3.1mm up to 12.7mm. Single row.
Snap together construction - no joining links required.
Related Information:
Sprockets - Idler
Complete with Needle Roller or Ball Bearings. 3.75mm to 25.4mm pitch.
Can be used directly on shafts with a surface hardnes of RC 58 or higher. Can be run on hardened Inner Rings. See also Drive Tighteners. 12.7mm Bore models can be run directly on the drive tighteners.
Related Information:
Sprockets - 3.12 x 1.47mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 3.12mm miniature plastic chain.
Related Information:
Sprockets - 3.75 x 1.6mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 3.75mm miniature plastic or stainless chain.
Related Information:
Sprockets - 6.35 x 2.8mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 6.35mm plastic or steel chain (25-1 ASA). American Standard 25-1 - 1/4 inch.
Related Information:
Sprockets - 9.53 x 4.7mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 9.53x4.7mm plastic or steel chain (35-1 ASA). American Standard 35-1 - 3/8 inch.
Related Information:
Sprockets - 9.53 x 5.7mm - Simplex - Plastic
Nylon - Acetal - With and without bore inserts.
Match with series 9.53x5.7mm steel chain (06B BS). British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Taperlock
Match with 12.70x7.75mm simplex chain (08B BS)
Taperlock Bored sprockets need to be matched up with a taperlock bush to obtain the correct bore size. British Standard 08B - 1/2 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 12.7 x 6.38mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x6.38mm simplex chain (41-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 41-1 - 1/2 inch.
Related Information:
Sprockets - 12.7 x 7.75mm - Duplex - Carbon Steel - Plain Bore
Match with 12.70x7.75mm duplex chain (08B-2 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch.
Related Information:
Sprockets - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x7.75mm simplex chain (08B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x7.85mm simplex chain (40-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 40-1 - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 15.88 x 9.4mm - Simplex - Carbon Steel - Plain Bore
Match with 15.90x9.4mm steel chain (50-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 50-1 - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Match with 15.90x9.65mm duplex steel chain (10B-2 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Match with 19.05x11.68mm simplex steel chain (12B-1 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 19.05 x 12.57mm - Simplex - Carbon Steel - Plain Bore
Match with 19.05x12.57mm simplex steel chain (60-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. American Standard 60-1 - 3/4 inch.
Related Information:
Sprockets - 3.75 x 1.6mm - Simplex - Stainless Steel - Plain Bore
Miniature 3.75mm Pitch.
Match with 3.75mm simplex chain. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Finished Bore
25-1 ASA 1/4 Inch. With finished bore.
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
25-1 ASA 1/4 Inch. With unfinished bore.
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 6.35 x 2.8mm - Simplex - Stainless Steel - Plain Bore
25-1 ASA 1/4 Inch. Stainless Steel 303 grade with unfinished bore.
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprockets - 9.53 x 4.7mm - Simplex - Carbon Steel - Plain Bore
Match with 9.53x4.7mm steel chain (35-1 ASA)
Finish bored and keyed sprockets with black oxide finish. Hub diameters vary to suit bore. American Standard 35-1 - 3/8 inch.
Related Information:
Sprockets - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Match with 9.53x5.7mm steel chain (06B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Assortment Kits - Various
Springs - O-Rings - Shafting - Circlips - Gears - Chain - Machine Keys - Nuts - Bolts - Shim - Screws - Washers - Roll Pins - Woodruff Keys - Cotter Pins - E-Clips - Fuses - Grease Nipples - Hitch Pins - Clevis Pins
Sprocket Plates - 12.7 x 7.75mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x7.75mm simplex chain (08B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprocket Plates - 12.7 x 7.85mm - Simplex - Carbon Steel - Plain Bore
Match with 12.70x7.85mm simplex chain (40-1 ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 08B - 1/2 inch. With and without hubs. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprocket Plates - 15.88 x 9.65mm - Simplex - Carbon Steel - Plain Bore
Match with 15.90x9.65mm duplex steel chain (10B-2 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 10B - 5/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprocket Plates - 19.05 x 11.68mm - Simplex - Carbon Steel - Plain Bore
Match with 19.05x11.68mm simplex steel chain (12B-1 BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 12B - 3/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprocket Plates - 6.35 x 2.8mm - Simplex - Carbon Steel - Plain Bore
25-1 ASA 1/4 Inch
Match with 6.35mm simplex chain. American Standard 25-1 - 1/4 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprocket Plates - 9.53 x 4.8mm - Simplex - Carbon Steel - Plain Bore
Match with 9.53x4.8mm steel chain (35ASA)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Sprocket Plates - 9.53 x 5.7mm - Simplex - Carbon Steel - Plain Bore
Match with 9.53x5.7mm steel chain (06B BS)
Pilot bored sprockets come with a very small bore that will need to be machined by the customer to suit their shaft size. British Standard 06B - 3/8 inch. For easy ready selected sets of chain and sprockets please see the HES website.
Related Information:
Bearings - Acetal - Special Purpose
Special acetal bearings for Bicycle Chain Derailer and special effects lighting systems
Lubricants - General
Various brands and types. Includes Inox, Lanox, Anti-Seize, Cutting Fluid, Chain Lube, Moly Lube, Food Grade Grease, PTFE Lubes, Silicone and more
Some items in this category are marked as only available for collection. Includes high temperature and food grade lubes. Battery Conditioner - Oils - Moisture Inhibitor - WD - Valve and Oring Lubricant.
Snaps - Spring - Interlocking - Style 1
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Snaps - Spring - Interlocking - Style 2
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Snaps - Spring - Interlocking - Style 3
Plated formed steel. For quick connecting and disconnecting of cable, rope and chain assemblies.
Slides - Drawer - Front Disconnect - Lever - Full Ext
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included).
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 127030 products in 2370 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
