Delays on shipments from USA and shipments passing through Singapore
Shipments from the USA are currently experiencing delays due to severe weather conditions. Shipments passing through Singapore are experiencing some minor delays due to Covid restrictions. We will keep you updated if your orders are affected.
Leadscrew Actuators Categories
Leadscrew Nut Flanges for Acme Nuts
Flanges for Acme leadscrew thread nuts imperial
These flanges are screwed onto the outer thread of the red leadscrew nuts. This provides a mounting surface to enable location of the leadscrew nut on the surface to be moved.
Related Information:
Leadscrew Nut Flanges for Acme Supernuts
Flanges for Acme leadscrew thread supernuts metric and imperial
MATERIAL - Aluminum 6062-T6. These flanges are screwed onto the outer thread of the red leadscrew nuts. This provides a mounting surface to enable location of the leadscrew nut on the surface to be moved.
Related Information:
Leadscrews - Imperial - Acme - Alloy Steel
Acme Leadscrew Thread - Use with Acme Supernuts
Alloy steel heat treated to RC 56-60.
Related Information:
Leadscrews - Imperial - Acme - Stainless Steel 18.8
Acme Leadscrew Thread - Use with Acme Supernuts
Related Information:
Leadscrew Nuts - Imperial - Acme - Bronze
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Nut only. Match with appropriate leadscrew.
Related Information:
Leadscrew Nuts - Imperial - Acme - Plastic
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Related Information:
Leadscrew Nuts - Imperial - Supernuts - Acme
Acme Leadscrew Nuts - Use with Acme Leadscrew thread and flanges for mounting
Related Information:
Leadscrew Nuts - Metric - Square - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Carbon Manganese Steel S300 Pb (11 SMn Pb37). If welding, difficulties may arise with bubbling due to sulphur content. To be used with screws:- LFM, LSM, LRH, LSRH (Single Start). Manual control - Low rotation speeds - For clamping or locking functions - For receiving dead weights. For power transmission and continuous use, always use bronze nuts, never steel. Nuts and screws should always be lubricated with grease or oil.
Related Information:
Leadscrew Nuts - Metric - Flanged - Plastic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Iglidur W300. Single Start / Right Hand.
Related Information:
Leadscrew Nuts - Metric - Round - Metallic
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: KSM = Carbon Manganese Steel S300 Pb (11 SMn Pb37) / LRM = Bronze CuSn8P. Carbon Manganese steel can be welded but difficulties may arise with bubbling due to sulphur content. KSM: Manual control control only - low rotational speeds only - for clamping or locking functions - for receiving dead weights. LRM: Manual or powered control - low and medium rotational speeds - for working under load. For power transmission and continuous use always use bronze nuts not steel.
Related Information:
Leadscrew Nuts - Metric - Round - Plastic - Iglidur W300
Trapezoidal thread design. Use with metric leadscrew thread listed in separate category.
Material: Iglidur W300 Plastic. Single Start / Right Hand.
Related Information:
Posi Drive Stage - Ball Slide
Compact economical Posi Drive Stages take the work out of designing linear motion control systems.
These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.
Posi Drive Stage - Crossed Roller
Compact economical Posi Drive Stages take the work out of designing linear motion control systems.
These stages require no alignment of components and install with only 4 standard fasteners. Fitted with anti backlash 9.525mm diameter leadscrews with 2.54mm lead and zero backlash multibeam couplings. NEMA 23 motor mounts. Straight line accuracy up to 0.00254mm per 25.4mm of travel. Repeatability 0.00254mm.
Magnets - Rare Earth - Plated
Incredibly strong attraction and repulsion. Neodymium-Iron-Boron encased in nickel jackets to protect the brittle magnet material and prevent corrosion.
High strength to weight ratios. Commonly used in miniature applications such as linear actuators, sensing applications, gyroscopes, flow meters, recording devices, pacemakers and alternators. Temperature range -73 oC to 93 oC. Size tolerances +/- 0.13.
Screws - Roof Bolt - Steel
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts.
Related Information:
Mounts - Universal - For Acme Thread and Ballscrews
Use grade 8 hex socket head cap screws for mounting.
Related Information:
Inserts - Thread Repair - Helicoil
Replacement helicoil inserts for after you have purchased a starter kit or tools separately.
Stainless 18-8 inserts with a hardness of RC43-50 and tensile strength above 200,000 PSI. Metric and Imperial available. Screw locking inserts have a series of straight segments to provide self-locking torque on the bolt, eliminating a need for other threadlocking methods.
Bolts - Eye - Full Threaded Shanks - Blank - Carbon Steel
Forged self coloured carbon steel. No threads. No capacity rating as this will depend on your modifications.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Bolts - Eye - Full Threaded Shanks - Carbon Steel
Forged self coloured carbon steel.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Bolts - Eye - Full Threaded Shanks - Plain - Stainless Steel
304 Stainless Steel
Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel
Forged self coloured carbon steel.
Forged self coloured carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Bolts - Eye - Full Threaded Shanks - Shouldered - Carbon Steel - Zinc Plated
Forged zinc plated carbon steel.
Zinc plated carbon steel. Should not be used for angular lifts greater than 45o. Safety swivel hoist rings are recommended for such applications.
Bolts - Eye - Partially Threaded Shanks - Plain - Carbon Steel
Hot galvanised finished steel with machine thread.
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.
Bolts - Eye - Partially Threaded Shanks - Plain - Stainless Steel
316 Stainless Steel
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.
Bolts - Eye - Partially Threaded Shanks - Shouldered - Carbon Steel
Hot galvanised finished steel with machine thread.
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.
Bolts - Eye - Partially Threaded Shanks - Shoulder - Stainless Steel
316 Stainless Steel
Any deviations such as angular lifts, shock loads, modifications of the basic forging etc will result in drastically reduced maximum loads.
Screws - Hex Head - Steel - Zinc Plated - Full Thread
BSW and METRIC - Set Screws
Related Information:
Screws - Fillister Head - Brass - Philips
Brass metal thread machine screws BA and METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Fillister Head - Brass - Slotted
Brass metal thread machine screws BA and METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Fillister Head - Steel - Philips
Metal Thread Screws BA - UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Fillister Head - Steel - Slotted
Metal Thread Screws BA - UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Hex Head - Brass
Brass metal thread machine screws UNC and UNF
Nuts sold seperately - See Nuts.
Related Information:
Screws - Hex Head - Titanium CP Grade 1
Fully threaded hex head set screws (DIN933). CP1 Commercially Pure Titanium Grade 1. Tensile Strength 24.6 kgf/mm2. Yield Strength 17.6 kgf/mm2. Elongation 24 Percent.
Din 933. Commercially pure for general industrial corrosion applications. UNS R50250. Widely used in power generation, chemical processing, aerospace and medical applications. Composition Percentage: Al 0, V 0, N 0.03, C 0.08, H 0.015, Fe 0.2, O 0.18, Ti Balance.
Related Information:
Screws - Panel - Jack - Steel
Female 4-40 UNC thread in head allows for secure fixing of studs to a panel.
Each screw comes with two flat washers, 1one lock washer and one hex nut. Yellow chromate zinc finish.
Screws - Pan Head - 303-304 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - 316 Stainless - Philips
Metal Thread Screws UNC - UNF - METRIC - Pan, cheese, fillister and round head.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Aluminium
UNC metal thread machine screws
Nuts sold separately - See Fasteners - Nuts.
Related Information:
Screws - Pan Head - Brass - Slotted
Brass metal thread machine screws METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Steel - Philips
Metal Thread Screws UNC - UNF - METRIC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Steel - Pozidrive
Metal Thread Screws. Metric only.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Pan Head - Steel - Slotted
Metal Thread Screws. Metric only.
Nuts sold seperately - See Nuts.
Related Information:
Screws - Round Head - Brass - Slotted
Brass metal thread machine screws BSW - UNF - UNC
Nuts sold seperately - See Nuts.
Related Information:
Screws - Round Head - Steel - Slotted
Metal Thread Screws. Metric and BSW only. Supplied with nut.
Nuts sold seperately - See Nuts.
Related Information:
Inserts - Thread Repair - Recoil
Recoil inserts are screwed directly into an enlarged tapped hole. Replacement inserts for your kit.
Stainless inserts. Replacement Individual Inserts - Require full kit to obtain correct tap. Manufactured to BS 4377 BS 3049 parts 1 & 2. Recoil helically-wound thread inserts are formed from 18-8 (Type 304) Stainless Steel. The wire in most sizes has a tensile strength of greater than 200,000 P.S.I. and a finish better than 32 micro inches.
Tools - Thread Repair
Quickly repairs damaged screws
Twisting the handle opens and closes the floating blade around screw. Rotating the tool around screw quickly repairs damaged threads. Adjustable to suit both metric and imperial threads. Blades automatically adapt to any thread pitch or groove. Can be used on both Left and Right hand threads.
Mounts - Leveling - Socket Type - Acme Thread - Gold Chromate
Use your own acme thread to make a custom stud. Adjusters.
Related Information:
Mounts - Leveling - Socket Type - Acme Thread - Stainless Steel
Use your own acme thread to make a custom stud. 303 Stainless Steel. Adjusters.
Related Information:
Main Pages
About Us
Balls List
Bearings List
Brands
Bulk Offers
Catalogue
Clearance Items List
Contact Us
Charity
Dental Bearings
Dowel Pins
Freight Rates and Shipping Times
Frequently Asked Questions
Games Clearance
Google Search
Hobby Clearance
Hobby Information
Large Bearings
Mailorder Form
Order History
Ordering
Payment and Shipping
Privacy
Product Showcase
Shipping Rates and Times
Technical
Terms
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 126998 products in 2361 categories including couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.
