Small Parts & Bearings - an MBA company

Latches push categories (Stocked Items Only)


Latches Slam Action


Latches - Slam Action - Slide
Latches - Slam Action - Slide

Fast snap in installation. Made from non-corrosive materials, black ABS plastic and stainless steel spring. Push to close latching.



You may also like

Latches Quarter Turn


Latches - 1-4 Turn - Simple
Latches - 1-4 Turn - Simple

With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.

The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.



Latches - 1-4 Turn -Tee Handle - Non Locking
Latches - 1-4 Turn -Tee Handle - Non Locking

Also see combined categories:
All Quarter Turn Latches

Quarter turn latches. Nema 4 and IP65 rated. Supplied assembled. Includes housing, insert, rubber seal, gasket, hex nut and cam.

Heavy Duty. Grip range is approximate and calculated as the door flange with compressed gasket and cabinet flange. Black polyamide handle. The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible.



Latches Other


Catches - Straight Loop
Catches - Straight Loop

High strength overcentre catch and strike. Economical and compact. Available in plain steel, zinc plated or 304 stainless steel. With or without mounting holes. Strike is included. Dimensions are as mounted.

Tension can be increased by increasing distance between catch and strike.



Latches Compression


Latches - Compression - Lift and Turn - Straight Handle
Latches - Compression - Lift and Turn - Straight Handle

Lift handle to relax compression and then turn to open. Handle and sleeve are die cast zinc with either polished chrome or black powder coat finish.

Comes with mounting hardware. Max working load 44kg. M5 mounting screws supplied. For panels thicker than 6.35mm a longer screw and lockwasher combination will be required.



Latches Draw


Latches - Draw - Over Centre - 300 Grade Stainless Steel
Latches - Draw - Over Centre - 300 Grade Stainless Steel

Passivated stainless steel. Latches mount with M4 screws, No. 8 screws or 5/32 rivets. Type B keeper uses a countersunk screw.

Keepers included. Type SC-97533 has a hole for a padlock.



Latches - Draw - T-Handle - Stainless Steel
Latches - Draw - T-Handle - Stainless Steel

Black rubber T Handle with stainless steel bracket and keeper. Shipped assembled. Installs with 4.8mm rivets (3/16 in.) or 10 Gauge Screws. Can be welded. Keeper included.



Latches Other


Latches - 110 Series - Adjustable Grip
Latches - 110 Series - Adjustable Grip

Ultimate strength 145kg. Working strength 120kg.

Strike needs to be ordered separately.



Latches - 200 Series - Heavy Duty
Latches - 200 Series - Heavy Duty

Ultimate strength 660kg. Working strength 265kg.

Heavy Duty.



Latches Rotary Action


Latches - Rotary Action - Link Lock - Keepers
Latches - Rotary Action - Link Lock - Keepers

Required for link lock rotary action latches. Match keeper with correct latch from selection.



Latches - Rotary Action - Link Lock - Rivetted - Stainless
Latches - Rotary Action - Link Lock - Rivetted - Stainless

Lift and rotate wing to operate.

Keepers not included and must be purchased separately.

Related Information:
Matching Keepers


Latches Other


Handles - Tee
Handles - Tee

Zinc plated steel 7.94mm (5/16in.) square shank.



Latches Handle


Handles - Latching - Padlocking
Handles - Latching - Padlocking

Zinc finished iron/steel construction. Has 5/16in. Square shank.



Latches Other


Keys - Tubular - For Latches
Keys - Tubular - For Latches

Tubular key to suit the key operated latches linked from inside this category.

Related Information:
Latches To Suit Key 1
Latches To Suit Key 1
Latches To Suit Key 2


Latches Handle


Handles - Latching - Cab Locks
Handles - Latching - Cab Locks

Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.



Latches Other


Strikes - Toggle Latch - Steel
Strikes - Toggle Latch - Steel

Used with toggle latches series 800, 802, 803 and 806



Latches Handle


Handles - Latching - L-Handle - Locking
Handles - Latching - L-Handle - Locking

Chrome finished zinc die-cast construction. 360o handle rotation. Comes with gasket. All locks are keyed alike. Keys included. May be used with rod kit for 2 point locking.

Related Information:
2 Point Rod Kit


Handles - Latching - T-Handle - Folding
Handles - Latching - T-Handle - Folding

Also see combined categories:
All T Handles

Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.



Handles - Latching - T-Handle - Locking
Handles - Latching - T-Handle - Locking

Also see combined categories:
All T Handles

90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.

Related Information:
2 Point Rod Kit


Latches Other


Strikes - Toggle Latch - Stainless Steel
Strikes - Toggle Latch - Stainless Steel

Used with toggle latches series 800, 802, 803 and 806



Latching Handles - Outside Door - Heavy Duty
Latching Handles - Outside Door - Heavy Duty

Black Glass Filled Polyamide Bezel, catch and Plug. Brass Shaft. Zinc plated mild steel fixing.



Latches Handle


Handles - Latching - 2-Point Locking Rod Kit
Handles - Latching - 2-Point Locking Rod Kit

Kit can be used with any 5/16in. Square shanked handles for two point locking. Kit includes two gold zinc plated steel rods, two plastic rod guides, steel cam, two steel bushings, two wave washers and three set screws.



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 126286 products in 2931 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 126286 products in 2931 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.