Latches Quarter Turn
With 5.08mm offset cam. Cam may be reversed for increased grip range. Includes detent in body which signals positive open or closed position.
The catch on these latches may be supplied either standard, inverted or flat depending on the grip range. Catches are not reversible. This category may be available in the new MBA online store at
Latches - 1-4 Turn - Simple.
Latches Other
Ultimate strength 145kg. Working strength 120kg.
Zinc plated steel 7.94mm (5/16in.) square shank.
This category may be available in the new MBA online store at
Handles - Tee.
Latches Handle
Zinc finished iron/steel construction. Has 5/16in. Square shank.
Zinc finished steel. Accepts 5/16 in. square shank. Inside handle, right or left hand. Picture shown is right hand.
Latches Other
Used with toggle latches series 800, 802, 803 and 806
Latches Handle
Gold zinc finished steel. Die cast construction. 5/16in. Square shank. 360o rotation. Blind mount. Padlockable.
90o clockwise rotation. Made of weatherable black nylon handle and steel parts. Includes one key. All locks keyed alike. May be used with rod kit for 2 point locking.
Related Information:
Latches Other
You may also be interested in
Catches
Draw pull catches are available in either steel or 304 stainless. Strike is included.
Spring Mounts
Neoprene elastomer springs have proven to be the safest, most efficient material for punching, stamping and drawing dies.
Major advantages include high loads, increased durability, better performance, no maintenance and long life. This category may be available in the new MBA online store at
Springs - Neoprene.
Related Information:
Ideal for computer server stotage, tool boxes, service truck tool drawers and vehicle battery trays. Full extension extra heavy duty slide. 220kg load rating for moderate use, 175kg for frequent use, 130kg for mobile (vehicular) use.
65kg load rating for flat mount applications. Slide space required 19.1mm. Slide includes a silencing bumper for drawer closure. Caution - slide must never be used as a pull-out step, platform or any application supporting human weight. This category may be available in the new MBA online store at
Slides - Drawer - Extra Heavy Duty.
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted two member slide. Friction brake allows drawer to come to a slow stop. Front disconnects by pulling firmly on the drawer until it releases. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). This category may be available in the new MBA online store at
Slides - Drawer - Front Disconnect - Friction - 19mm Ext.
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Undercarriage mounted two member slide. Friction brake allows drawer to come to a slow stop. Only one required per drawer. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). Shipped with a bracket and two plastic tracks.
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Front disconnects by lifting a lever lever. Requires 16 M4 or 8 Gauge Pan Head Screws (not included). This category may be available in the new MBA online store at
Slides - Drawer - Front Disconnect - Lever - Full Ext.
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Lever Disconnect. Non locking. 19.1mm side space.
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Used for filing cabinets, utility and industrial truck storage, machine tool drawers, generators and heavy mechanical devices.
Used for desks, credenzas and cabinets.
Used for shallow drawers, tool chests and medical carts.
Used for shallow drawers, tool chests and medical carts.
Hold in detent. Full extension. 12.7mm Side Space. Includes 32mm hole pattern as well as traditional hole pattern.
Used for shallow drawers, tool chests and medical carts.
Used for shallow drawers, tool chests and medical carts.
Used for shallow drawers, tool chests and medical carts.
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide with a quick disconnect. This category may be available in the new MBA online store at
Slides - Drawer - Quick Disconnect - Medium Duty - Full Ext.
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.
Made from 304 stainless with bearing balls. Used where corrosion resistance is required such as laboratories, humid and damp environments, marine applications and clean rooms. Bright finish, tight tolerance, quiet operation and smooth glide.
Side mounted three member slide. Allows drawer to be pulled out further than the slide length allowing full access to the drawer. Positive stop slide that will not disconnect once installed.
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at
Springs - Drawbar - Stainless Steel.
Related Information:
Drawbar springs have long steel loops that pass through the centre of the spring and hook around the opposite end, compressing the spring on loading.
This design helps prevent unexpected overloading and fracturing that can occur in standard extension springs by stopping and hold the load at the spring limit. The spring rate indicates the load required to pull out the first 25mm of the spring. This category may be available in the new MBA online store at
Springs - Drawbar - Zinc Plated.
Related Information:
Cold rolled and hot drawn hex bar to ASTM B348
Light duty acetal bearings used for drawer runners, light duty tracks, garage doors and more.
See descriptions for special features. Not all items are listed in this category. Please contact us if you have a similar type bearing with different dimensions. This category may be available in the new MBA online store at
Bearings - Acetal - Special Types.
Low carbon cold drawn steel with zinc plated finish
Any deviations such as angular lifts, shock loads, modifications will result in drastically reduced maximum loads. This category may be available in the new MBA online store at
Hooks - S - Steel.
Zinc plated hard drawn steel wire rings.
Three internal compression springs supply up to 30kg of spring tension. Available as padlockable or with secondary catch.
Spring tension compensates for gasket set. Provides exact tension for water tight and air tight seals. This category may be available in the new MBA online store at
Catches - Compression Spring.
Strong and light polyacetal and polyamide. Holds cabinets secure with 7kg of pull force.
Various styles - refer pictures
Ultra thin strong magnetic catch is perfect for tight areas. Has a full 4kg of magnetic force.
Related Information:
Ultra thin strong magnetic catch is perfect for tight areas. Has 2.5 kg of magnetic force.
Related Information:
304 Stainless Steel and Polyurethane
Polyacetal catch and strike with polyethylene rollers. Ideal in corrosive environments.
Mounts inside your enclosure. Installs either right or left side by inverting. Use 4 gauge screws or 1/8in (3.125mm) rivets to install.
Fast economical installation.
Fits frames from 1.1 to 7.1mm thick. Installation hole size 15mm x 39.9mm. Push to close and pull to open. Spring loaded over centre action. Corrosion resistant black ABS with 303 stainless steel spring.
Patented quick clamp is ideal for door openings on bins, hoppers, tanks and manholes. T-Handle allows torque without tools. The one piece unit is made from highly polished 304 stainless steel.
Full 50.8mm adjustment. 180
o pivot when disengaged leaving access doorway unobstructed. Will not loosen through vibration. Brackets supplied for easy installation. This category may be available in the new MBA online store at
Clamps - Lorenz.
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench. This category may be available in the new MBA online store at
Inserts - Self Tapping - For Wood - Hex Drive.
Threaded inserts are screwed into preformed or predrilled holes and cut own threads into the wall of permanent installations.
Die Cast Zinc Alloy. Knife thread cuts easily into a predrilled hole. Inexpensive inserts for use in ready to assemble furniture, drawer pulls etc. Installs with a hex wrench. This category may be available in the new MBA online store at
Inserts - Self Tapping - For Wood - Hex Drive - Flanged.
Freight Rates
Terms and Conditions
Privacy Policy
Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)
Small Parts & Bearings offers 138616
products in 2015 categories including
couplings, screws, hex nuts, ball bearings, roller bearings, thrust bearings, ceramic and hybrid bearings, stainless steel bearings, miniature bearings, shafting, corrosion resistant bearings - see the full listing in the
Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or
cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.
Using the links throughout this site you will find extensive information including catalogues, technical data, and other
product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully
traceable courier delivery.
Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.
Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.