Small Parts & Bearings - an MBA company

Knobs Pointer Black Aluminium Categories


Knobs Pointer


Knobs - Pointer - Black Aluminium
Knobs - Pointer - Black Aluminium

Also see combined categories:
All Pointer Knobs

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft.



Knobs - Pointer - Aluminium and Plastic
Knobs - Pointer - Aluminium and Plastic

Also see combined categories:
All Pointer Knobs

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass Insert. White Pointer.



You may also be interested in

Measuring Equipment


Vernier and Disc Dial Sets
Vernier and Disc Dial Sets


Precision Engraved.

2024 Aluminium Black Anodized. Engraving filled with white enamel.


Knobs Ball


Knobs - Ball - Threaded - Polished Aluminium
Knobs - Ball - Threaded - Polished Aluminium

Also see combined categories:
All Female Threaded Ball Knobs

DIN319 Tapped aluminium

Polished with a flash chrome finish.


Housings for Ball Bearings


Housings - Bearing - Square - Miniature
Housings - Bearing - Square - Miniature


Aluminium housings to suit standard radial ball bearings.

Use with standard radial ball bearings. Bearing not included. Can be through screwed from the top using socket head cap screws. Can be bolted from the bottom using the pre-tapped holes. Made from Aluminium 6082-T6 Black Anodised.


Pulleys - Timing - 5.000mm Pitch - GT2 - 15mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 - 15mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 15mm wide. Aluminium, steel and cast iron.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores. Unfinished types requires drilling and tapping.

Related Information:


Pulleys - Timing - 5.000mm Pitch - GT2 - 9mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 -  9mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 9mm wide. Aluminium, steel and cast iron.

Aluminium Alloy and Black Oxide Coated Steel. Aluminium types have finished bore and grub screws. Steel type have unfinished bores.

Related Information:


Gearboxes - Inline - 63 x 40mm
Gearboxes - Inline -  63 x  40mm

Also see combined categories:
All Inline Gearboxes

J64 Series.

End Caps: Aluminium. Centre Body: Black Delrin. Gear: 817M40 (EN24). Weight: 0.3kg. Backlash: Depends on ratio. Max Input Speed: 4000 Rpm. Lubrication: Greased for life - Shell Nerita Grease HV. Testing in your applications is necessary. Torque figures are to be used for guidance only.

Related Information:


Pulleys - Timing - 5.000mm Pitch - GT2 - 25mm Wide - Through Bore
Pulleys - Timing -  5.000mm Pitch - GT2 - 25mm Wide - Through Bore

Also see combined categories:
All 5mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit GT 5.000mm Pitch Timing Belts. Suits belts 25mm wide. Aluminium, steel and cast iron.

Black oxide coated steel with unfinished bores. Unfinished types requires drilling and tapping. Bore requires machining to finished size.

Related Information:


Pulleys - Timing - 5.080mm Pitch - XL - 9.5mm Wide - Through Bore
Pulleys - Timing -  5.080mm Pitch - XL -  9.5mm Wide - Through Bore

Also see combined categories:
All XL 5.08mm Pitch Timing Pulleys Through Bore

Timing Pulleys to suit XL Series 5.080mm Pitch Timing Belts. Suits belts 9.0 to 9.6mm wide.

Aluminium alloy and Black Oxide coated steel. Finished bore with set screw locking. Unfinished types requires drilling and tapping. Bore requires machining to finished size.

Related Information:


Knobs - Pointer - Arrow Top
Knobs - Pointer - Arrow Top

Also see combined categories:
All Pointer Knobs

Push on. Suits 6.35mm (1/4 inch) shaft.



Knobs - Pointer - Skirted
Knobs - Pointer - Skirted

Also see combined categories:
All Pointer Knobs

Grub screw fixing. Suits 6.35mm (1/4 inch) shaft. Brass insert.



Pins - Pull - Threaded End - Aluminium and Steel
Pins - Pull - Threaded End - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. 3/8-16 Threaded end so you can add your own handle or knob. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg.

Related Information:


Pins - Pull - Round Handle - Aluminium and Steel
Pins - Pull - Round Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:


Pins - Pull - Tee Handle - Aluminium and Steel
Pins - Pull - Tee Handle - Aluminium and Steel

Also see combined categories:
All Pull Pins

Spring loaded pull pins allow you to quickly retract and engage the plunger for locating, fastening and quick change operations.

Two part assembly includes a barrel and a plunger assembly. The plunger assembly screws into the housing. The housing is designed to be welded into place for strength. Pulling on the handle of the plunger assembly retracts the plunger into the housing. Releasing the handle allows the spring loaded plunger to extend. Handles are black plastic. Aluminium housing 6061-T6, Steel pin 12L15. Pull up force approx 2.2kg. Lockout style (indicated in tables) allows you to pull and rotate handle 1/4 turn to lock plunger in retracted position.

Related Information:


Enclosures - Aluminium - Economy
Enclosures - Aluminium - Economy

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical projects.

Excellent screening properties for EMI and RFI. Ideal for projects subject to weather. Great housings for mechanical projects. Easy to machine. 380 Die Cast aluminium alloy BS1490 LM24. Close fitting flanged lids.


Rectangular Bar - Aluminium
Rectangular Bar - Aluminium

Also see combined categories:
All Rectangular Bar

Thin and thick Aluminum strip and rectangular profiles

Small sizes may not be perfectly straight.


Screws - Thumb - Knurled - Aluminium
Screws - Thumb - Knurled  - Aluminium

Also see combined categories:
All Thumb Screws

Aluminum knurled head thumb screws



Snaps - Swivel Eye - Aluminium
Snaps - Swivel Eye - Aluminium

Also see combined categories:
All Snaps

Rust proof nickel plated made from finest quality zinc aluminium alloy



Couplings - Double Disk - Aluminium
Couplings - Double Disk - Aluminium


Zero Backlash - High Torsional Stiffness.

Hub and Spacer: Aluminium Alloy. Pin and Disc: Stainless Steel. Max Axial Play: +/-0.5mm. 0.7 to 12.5 Nm. 3000 to 19000 rpm.

Related Information:


Bushes - Aluminium Bronze - Flanged
Bushes - Aluminium Bronze - Flanged

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:


Bushes - Aluminium Bronze - Graphite Plug - Flanged
Bushes - Aluminium Bronze - Graphite Plug - Flanged

Also see combined categories:
All Bronze Bushes
All Flanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:


Bushes - Aluminium Bronze - Graphite Plug - Unflanged
Bushes - Aluminium Bronze - Graphite Plug - Unflanged

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:


Bushes - Aluminium Bronze - Unflanged
Bushes - Aluminium Bronze - Unflanged

Also see combined categories:
All Bronze Bushes
All Unflanged Bronze Bushes

Used for dies, moulds and heavy machinery. C95400 Aluminium bronze.

ID and OD Tolerance : -0.0000 / +0.0127. Length Tolerance : -1.524 / +0.000.

Related Information:


Enclosures - Aluminium - 100 Series
Enclosures - Aluminium - 100 Series

Also see combined categories:
All Enclosures

Great little boxes ready for you to adapt to your mechanical or electrical projects.

Internal guide slots for mounting PCB assemblies vertically. Ideal for housing sensitive electrical, mechanical, pneumatic or hydraulic devices. Provides effective shielding of EMI and RFI. Designed to IP65 of IEC529 and NEMA 4 (dust and hoseproof). The lid incorporates a recessed neoprene gasket.


Sheet - Aluminium - T1100
Sheet - Aluminium - T1100

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T1100 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.


Sheet - Aluminium - T7075
Sheet - Aluminium - T7075

Also see combined categories:
All Sheet
All Aluminium Sheet

Non precision inexpensive aluminium sheet for hobby applications. Heat-treated T7075 grade.

Sheet for applications not requiring absolute precision. Thickness tolerances +/- 0.1mm. Lengths and widths will be at least that specified but may be more.


Shafting - Aluminium
Shafting - Aluminium

Also see combined categories:
All Shafting
All Aluminium Shafting

Drylin aluminium shafting is recommended for use with Igubal Drylin bearings or Frelon lined bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: ph between 2 and 9.


Shafting - Aluminium - Ceramic Coated
Shafting - Aluminium - Ceramic Coated

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:


Shafting - Aluminium - Ceramic Coated - Tapped
Shafting - Aluminium - Ceramic Coated - Tapped

Also see combined categories:
All Shafting
All Aluminium Shafting

Recommended for use with Frelon Gold linear bearings. Aluminium 6061-T6 with ceramic coated finish. Ceramic coat has rockwell hardness of 70C. No magnetic and vibration reseistant.

Weld spatter, contaminants and paints will not stick. Do not use with ball bearings. Use with Frelon lined or similar plain bearings only. Shaft ends are not coated.

Related Information:


Inserts - Self Tapping - For Aluminium - Steel
Inserts - Self Tapping - For Aluminium - Steel

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from steel with zinc chromate finish.

Related Information:


Inserts - Self Tapping - For Aluminium - Stainless 303
Inserts - Self Tapping - For Aluminium - Stainless 303

Also see combined categories:
All Self Tapping Inserts

Threaded inserts are screwed into preformed or predrilled holes and cut their own threads into the wall of permanent installations.

Provides a strong wear and vibration resistant thread. Low volumes can be installed by winding in with a bolt through the threaded centre. Large volumes can be installed with hand installation tools (Sold Seperately). Hole sizes are reference only. Can variey on batchs. Optimum hole size is to be determinded through experimentation. A 60o countersink is required for flush mounting. Can be used in Aluminium, aluminium alloy or magnesium. Made from 303 stainless steel.

Related Information:


Screws - Thumb - Knurled - Washer Face - Aluminium
Screws - Thumb - Knurled - Washer Face - Aluminium

Also see combined categories:
All Thumb Screws

Knurled head aluminum thumb screws with an integral washer



Gears - Internal - 24 Diametrical Pitch - Aluminium
Gears - Internal - 24 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum



Gears - Internal - 32 Diametrical Pitch - Aluminium
Gears - Internal - 32 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum



Gears - Internal - 48 Diametrical Pitch - Aluminium
Gears - Internal - 48 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum



Gears - Internal - 64 Diametrical Pitch - Aluminium
Gears - Internal - 64 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum



Gears - Internal - 72 Diametrical Pitch - Aluminium
Gears - Internal - 72 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum



Gears - Internal - 96 Diametrical Pitch - Aluminium
Gears - Internal - 96 Diametrical Pitch - Aluminium

Also see combined categories:
All Imperial Internal Gears
All Internal Gears

2024-T4 Aluminum



Nuts - Hexagonal - Aluminium
Nuts - Hexagonal - Aluminium

Also see combined categories:
All Nuts

METRIC.

Note! Thickness (H) and A/F (A) dimensions are usually considered not critical and may vary. If the A and H dimensions are critical for your application please consult us prior to ordering.

Related Information:


Washers - Cup - Aluminium
Washers - Cup - Aluminium

Also see combined categories:
All Cup Washers

For countersunk screws.

Aluminium solid cup washers.




Rod - Round - Aluminium
Rod - Round - Aluminium

Also see combined categories:
All Metal Rod - Round

For general hobby applications.

NOTE! Very thin sizes may experience some bending. They may not be straight for the entire length. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground.

Related Information:


Tube - Round - Aluminium
Tube - Round - Aluminium

Also see combined categories:
All Metal Tube - Round

Hollow round tubing for general hobby applications.

For general hobby applications. May be slightly oversized on OD so some reworking may be required before fitting closely mating parts such as bearings. For use with bearings we suggest you use items from the category - Shafting - Ground. Many sizes fit neatly into larger sizes to allow for telescoping size applications. Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:


Tube - Square - Aluminium
Tube - Square - Aluminium

Also see combined categories:
All Metal Tube - Square

Hollow square tubing for general hobby applications.

Some items may be available in longer or shorter lengths. e-mail sales@smallparts.com.au with enquiries.

Related Information:


Tube - Streamline - Aluminium
Tube - Streamline - Aluminium

Also see combined categories:
All Metal Tube

Streamline Aluminium Tubing.

Teardrop shaped soft aluminium tubing. Enables easier bending. Great for tight applications.

Related Information:


Shafting - Pipe - Aluminium
Shafting - Pipe - Aluminium

Also see combined categories:
All Pipe Shaft
All Metal Tube

Recommended for use with Igubal Drylin bearings only.

Material : AlMgSi 0.5 F22. Tolerance: h9 - h11. Roundness: DIN 1798. Straightness: DIN 1798. Hardness: 75HB. Surface: Hard anodised. Oxidisation (wear resistant Al. Oxide) Layer Thickness: Greater than 40um. Surface Hardness: 450-550 HV. Roughness: Ra Less than 0.5. Special Electrical Resistance: 4*1011 Ohm mm2/m. Chemical Resistance: Ph Greater than 2 and Less than 9.


Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium
Linear Slides - Utilitrak - PW - Crowned - Channel - Aluminium


Use with Utilitrak PW Crowned Carriages. 6063-T6 aluminium alloy. Economical choice for light duty applications.


Related Information:


Knobs - Tri - Female
Knobs - Tri - Female

Also see combined categories:
All Tri Knobs
All Knobs

Black Polypropylene easy to grip knobs.



Knobs - Tri - Male
Knobs - Tri - Male

Also see combined categories:
All Tri Knobs
All Knobs

Black Polypropylene easy to grip knobs.



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Registered Australian Company: Small Parts & Bearings Pty Ltd (ABN 79 121 865 414)

Small Parts & Bearings offers 124371 products in 2774 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.