Small Parts & Bearings - an MBA company

JOINTS CLEVIS


Category Matches

Clevis Joints


Joints - Clevis - Plastic
Joints - Clevis - Plastic

Also see combined categories:
All Clevis Joints

Use with plastic rod ends - Includes pin and clip. See also yokes.

Comes with clevis pin and retaining clip. Corrosion Resistant, Lightweight. High Tensile Strength (Shown in table as Short Term / Long Term). Vibration Dampening / Noise Dampening. (1) Tensile Strengths shown are Maximum Static axial in Newtons.



Joints - Clevis - Spring Clips
Joints - Clevis - Spring Clips

Clips only, joints ordered separately. Made from 9SMn steel. Used like a clevis pin but with a clip to hold them to the body of the clevis joint. Check clevis joint body size for suitability.

Steel 9 SMn 28K (550-700 N/mm2). See also yokes.

Related Information:
Clevis joints to suit spring clips


Joints - Clevis - Steel
Joints - Clevis - Steel

Also see combined categories:
All Clevis Joints

Joint only, clip pin ordered separately. Made from zinc plated 9SMn steel.

Steel 9 SMn 28K (550-700 N/mm2). Zinc plate and clear passivated. Pin not included. See also yokes.

Related Information:
Clevis spring clips
Clevis pins


You may also be interested in

Yoke Ends


Yoke Ends - Threaded
Yoke Ends - Threaded

Also see combined categories:
All Yoke Ends

Linkage Connectors

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:
Large Clevis Pins to suit these yokes
Other Clevis Joints
Other Clevis Pins


Yoke Ends - Blank
Yoke Ends - Blank

Also see combined categories:
All Yoke Ends

Linkage Connectors with blank ends - no hole

Drop forged steel machined to SAE standards. Also see clevis joints.

Related Information:
Large Clevis Pins to suit these yokes
Other Clevis Joints
Other Clevis Pins


Cross Blocks


Joints - Swivel - Double Wing Knob - Steel
Joints - Swivel - Double Wing Knob - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.



Joints - Swivel - Knob Style - Stainless Steel
Joints - Swivel - Knob Style - Stainless Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.



Joints - Swivel - Knob Style - Steel
Joints - Swivel - Knob Style - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.



Joints - Swivel - Miniature - Steel
Joints - Swivel - Miniature - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.



Joints - Swivel - Split Type - Steel
Joints - Swivel - Split Type - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.



Joints - Swivel - Tee Handle - Steel
Joints - Swivel - Tee Handle - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.



Joints - Swivel - Wing Knob - Stainless Steel
Joints - Swivel - Wing Knob - Stainless Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 303 Stainless Steel.



Joints - Swivel - Wing Knob - Steel
Joints - Swivel - Wing Knob - Steel

Also see combined categories:
All Swivel Joints
All Swivel Joints and Cross Blocks

Precision made. Column lock feature. Will not become loose when adjusting. Universal design will fit any make of magnetic base, surface gauge or indicator. 12L14 Steel.



Ball Joints


Joints - Ball and Socket - Right Angle - Light Duty
Joints - Ball and Socket - Right Angle - Light Duty

Light duty ball joints provide a pivot point. They are unhardened and should not be used for high load or high repetition applications. Clearance is not specified, so actual joints may range from very loose to reasonably tight.

Steel Type: Zinc Passivated Induction Hardened. Stainless Steel Type: 303 Grade unhardened. Max. Static push/pull loads are valid for both radial and axial loads. Standard Steel type Ball Stud Tensile strength: Rm = 600 N/mm sq (Not applicable to stainless type). Standard Steel type Housing Tensile strength: Rm = 500 N/mm sq (Not applicable to stainless type).



Joints - Ball Positioner
Joints - Ball Positioner

For holding parts at an angle up to 45 degrees

Pivots 45 Deg from horizontal in every direction. Tightens at any position by rotating the collar. Has a tapped hole at the top and a male thread at the bottom for securing.



Dual Eye Joints


Joints - Dual Eye - Parallel
Joints - Dual Eye - Parallel

Maintenance free - self lubricating thermoplastic. Mechanical joining linkage. Self aligning to compensate for angular misalignment. MSTS = Maximum Static Tensile Strength. MSAS = Maximum Static Axial Compressive Strength.



Tee Joints


Joints - Tee - Tubing and Rod
Joints - Tee - Tubing and Rod

Inexpensive nylon joiners for hobby tubing and rod



Main Pages



Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 125736 products in 2919 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.

Freight Rates
Terms and Conditions
Privacy Policy

Small Parts & Bearings offers 125736 products in 2919 categories including ball bearings, roller bearings, thrust bearings, ceramic and ceramic hybrid bearings, stainless steel bearings, miniature bearings, linear bearings, shafting, oil seals and adhesives - see the full listing in the Online Catalogue. We have excellent Freight Rates within Australia and worldwide. We offer a choice of delivery with a signature required, or cheaper options with no signature required. The no signature required options are at the customer’s risk once the goods leave our store.

Using the links throughout this site you will find extensive information including catalogues, technical data, and other product specific information. We sell our products worldwide through our online store and our overseas freight rates are competitive for fully traceable courier delivery.

Small Parts & Bearings is part of MBA Group offering a select range from the MBA Group catalogue.

Small Parts & Bearings products are not authorised for sale into the USA or Canada due to the reluctance of Australian insurers to provide product liability insurance into those two countries.

Information on this website is Copyright Small Parts & Bearings 1997. All rights reserved.